Smart+ Products SPP1500SBH Owner's Manual

DIGITAL QUARTZ INFRARED HEATER

OWNER’S MANUAL

Model No.: SPP1500SBH

PLEASE SAVE THESE INSTRUCTIONS

WARNING: READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE

Thank you for choosing the Smart+ Products Digital Quartz Infrared Heater. This owner’s manual
will provide you with valuable information necessary for the proper care and maintenance of your
new product. Please take a few moments to thoroughly read the instructions and familiarize
yourself with all the operational aspects of your new heater.

IMPORTANT INSTRUCTIONS

When using this electric unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to

persons, including the following:

1. Read ALL instructions before using this unit.

2. CAUTION: Risk of Electric Shock. DO NOT open or try to repair the heater yourself.

3. This heater may get hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handles
when moving this heater.

4. Keep combustible materials, such as furniture, pillows, bedding, paper, clothes, and curtains at least 3 ft from the front of
the heater and keep them away from the side, top, and rear. DO NOT place towels or other objects on the heater.

5. Do not leave heater unattended while on. Extreme caution is necessary when any heater/fan is used by or near children or
invalids and whenever the heater/fan is left operating unattended.

6. DO NOT operate any heater with a damaged cord or after the heater malfunctions, has been dropped or damaged in any
manner. Return heater to authorized service facility for examination, electrical mechanical adjustment, or repair

7. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. NEVER locate heater where it
may fall into a bathtub or other water container. To protect against electrical hazards, DO NOT immerse in water or other liquids.

8. DO NOT touch the control panel or plug with a wet hand.

9. DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. Arrange cord away
from traffic area and where it will not be tripped over.

10. DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire,
or damage the heater.

11. To prevent a possible fire, DO NOT block the air intakes or exhaust in any manner. DO NOT use on soft surfaces, like a bed,
where openings may become blocked.

12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, explosive and/or flammable
liquids are used or stored. Keep unit away from heated surfaces and open flames.

13. Do not use an extension cord because the extension cord may overheat and cause a risk of fire.

14. To avoid fire or shock hazard, plug the directly remove plug form outlet. Pull firmly on the plug, DO NOT unplug by pulling
on the cord.

16. Always unplug the unit before moving or cleaning, or whenever the heater is not in use.

17. Use only for intended household use as described in this manual. Any other use not recommended by the manufacturer may
cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by unauthorized dealers may
cause hazards.

18. Always use on a dry, level surface. Use on floor only.

19. DO NOT use outdoors.

20. WARNING: To reduce the risk of fire or electrical shock, DO NOT use this unit with any solid-state speed control device.

21. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The
inside of the unit contains no user serviceable parts. Qualified personnel should perform all servicing only.

22. Connect to properly grounded outlets only.

23. SAVE THESE INSTRUCTIONS.

SPECIFICATIONS

Voltage Rating
Power Consumption

Unit Size
Unit Weight

SAFETY FEATURES

Tip-Over Safety Feature

120 V (60Hz)
1000/1500W (12.5 Amps), 5120 BTUs

325x190x314mm / 12.8x7.5x12.4 inches

5.2kgs / 11.5lbs

This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the
heater off. Once the heater is restored an upright position, the heater will rest. To continue operation, turn on the heater using the
supplied remote control or the control panel on the heater.

Overheat Safety Feature
This heater is equipped with an overheat safety feature. When the heaters internal components reach a certain temperature that could
cause overheating and possible fire, the heater will automatically shut off. To reset the heater simply turn the unit off, unplug the heater
for about 10 minutes. Plug in and turn it on.

WARNING: This heater has a voltage rating of
120 volts. The cord has a plug as shown in A. An

adapter as shown in C is available for connecting
three-blade grounding-type plugs to two-slot
receptacles. The grounding lug extending from the
adapter must be connected to a permanent ground
such as a properly grounded outlet box. The
adapter should not be used if a three-slot grounded
receptacle is available.

DO NOT DEFEAT THE SAFETY PURPOSE OF

THE GROUNDED PLUG

WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet and the plug may cause
overheating of the plug. If this occurs, try inserting the plug into a different outlet.
Contact a qualified electrician to inspect the original outlet for damage.