SmartPool Inc Robo-Kleen User Manual

Table of Contents

Important Safeguards 2
Introduction 3
Installation 4
Operation 5
Cleaning Pattern 5
Automatic Shutoff and Removal 6
Maintenance 6
Warranty 8

!

WARNING: To reduce the risk of fire, electrical shock, injury,

!

!

!

!

!

!

!

!

!

!

or damage to your product or to bathers:

Do not use if unit is damaged in any way.

Use this product only for its intended use as
described in this manual.

Unit must be submerged in water to operate
properly.

When not in use, store indoors in a clean, dry place.
Do not leave underwater, in direct sunlight, or
exposed to extreme temperatures.

Make sure Robo-Kleen is unplugged from its power
supply before cleaning, replacing the filter or any
other routine maintenance.

To protect risk of electrical shock, do not put the
transformer in water or other liquid.

To avoid damage to the transformer and cord, never
carry the transformer by the cord or yank to
disconnect from an outlet. Instead, disconnect by
pulling the plug itself from the outlet. Do not pull
cord around sharp corners or edges.

Do not operate with a damaged cord or transformer.
Do not use with extension cord.

Disconnect transformer from outlet when not in use.

If cleaner is not working as it should or has been
dropped or damaged in any way, contact SmartPool

2

customer service before using.

Congratulations on your purchase! You will find Robo­Kleen to be the most effective pool cleaner available.

Unlike water-powered cleaners, which put all dirt and debris
through your existing pool pump and filter,

Robo-Kleen has

its own pump and filter system. This saves you money in
electricity costs and extends the life of your existing pool
equipment.

Read carefully before using your Robo-Kleen pool cleaner.

Power Supply

Connect to 110V
GFCI Outlet

Drive

Wheels

Power On/Off

Switch

Filtered Water
Outlet

Connect to the
Cleaner

Mobile Cleaning Unit

Connect to

Power Supply

Steering

Wheels

Water Escape

Door

Side Handle

3