SmartLabs SML5112W User Manual

SML-5112W

User Guide

©2016 SmartLabs LLC

1 Thank you for choosing us

The SML-5112W is a small-form solution, but still high performance set-top box (STB)
capable of delivering to your home the exciting world of cutting edge interactive services.

This manual contains a description of all possible features and options of
SML-5112W, however your device may look slightly different from the one pictured in
this document.

The packaging and configuration of your device, such as presence or absence of
certain connectors, are defined by the service provider.

Information about interactive television services available through the set-top box is
given by your service provider in a separate manual (not included).

2 Distribution kit

SML-5112W set-top box
DC adapter 12V 2.5A
HDMI cable
Remote control (RC)
Quick start guide in English

3 Safety and storage

Read this manual before using the set-top box (STB). Please, follow the precautions
and operating instructions.

Do not open or repair the STB by yourself. Improper repair may result in

electrical shock or fire. In addition, the STB is removed from the warranty.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

The STB is intended for the indoors use only, with air temperature from 0°C to

35°C (from 32°F to 95°F) and 30-70% of relative humidity, non-condensing.
Use only power supplies listed in the user instructions.
Do not use the STB if the power cord is damaged.
To reduce the risk of fire or electrical shock, do not expose the STB to dripping

or splashing and do not place any objects filled with liquids on or next to the

STB.
Do not expose the STB to any liquids, rain, steam, moisture or high humidity.
Do not expose the STB to direct sun light.
Do not place the STB near open fire or heating elements.

105318, Russia, Moscow, Shcherbakovskaya str., b. 3. Ph.: [phone] page 2 of 13

http://www.smartlabs.tv CONFIDENTIAL

Element

Purpose

Power
indicator

Green —STB is switched on and operates normally.
Red — STB is in the stand-by mode.

IR receiver

The internal IR receiver is accepting signals from the IR remote control
(RC). This element should be in the direct visibility range from the IR

Do not expose the STB to vibrations or shaking.
Do not use the STB in dusty environments.
If a storm is coming or if you are not going to use the STB for a long time,

unplug the power cord and disconnect the Ethernet cable. This will help to

protect the unit from lightning and power line surges.
Batteries (battery pack or batteries installed) shall not be exposed to excessive

heat such as sunshine, fire or the like.
The mains plug of adapter is used to disconnect device from power supply. The

mains plug of adapter shall remain readily operable.
When using set-top box with a plasma TV, do not put picture on pause for more

than 5 minutes, due to plasma TV screen design it could lead to display

damage. The set-top box manufacturer is not responsible for any damage

caused in such manner.
The software on your STB is updated automatically. Do not unplug the power

cord and do not disconnect the Ethernet cable while the software is updating.

The STB manufacturer is not liable for any consequences of incorrect software

update.
The manufacturer does not guarantee the absence of interference with other

devices. To eliminate possible interference, increase the distance between the

STB and other equipment, or connect equipment using a different setup.

4 Indicators and slots

Front panel

105318, Russia, Moscow, Shcherbakovskaya str., b. 3. Ph.: [phone] page 3 of 13

http://www.smartlabs.tv CONFIDENTIAL

RC, if an external IR receiver is not used.

№

Element

Purpose

1

A/V

The analog audio/video interface (composite + stereo audio signal)

2

HDMI

The audio/video interface for connecting with an HDMI-compliant
device

3

USB

USB 3.0 port

4

LAN

Ethernet port, 10/100/1000 Mbps

5

DC 12V

The port for a power adapter

Back panel

5 Installation

1. Remove your STB from packaging and remove the protective tape.

2. Make sure that the place, where you are installing the STB, meets the following
requirements:

o Place STB on a flat surface.
o Do not place the STB on slick surfaces, where there is a risk of vibration, fall

or other damages of STB.

o Do not mount the STB on soft surfaces, like a bed, carpet, etc. Such a

surface impedes access for air and normal ventilation of the STB and thereby
causes overheating and malfunctioning.

o Do not cover the STB.
o Do not shield the ventilation holes in the STB’s enclosure located at the top

panel of the STB.

o When mounting the STB, make sure that there are at least 10 cm of free

space at each side of the device. Do not place STB in closed cupboards and
caves.

o Do not place STB on surfaces, which can heat, for instance, on boosters.
o Do not place any things on the device.
o To avoid damage of the power adapter’s cable, place the cable so that it is

not pressed, pinched or mechanically affected in any way.

3. Make sure that the TV set and the STB are not connected to the power network.

4. Connect the TV set and the STB with the HDMI cable.

105318, Russia, Moscow, Shcherbakovskaya str., b. 3. Ph.: [phone] page 4 of 13

http://www.smartlabs.tv CONFIDENTIAL