SmartLabs SML-5041W User Manual

SML- 5041W

User manual

Thank you for choosing us

The SML-5041W is a small-form and high-performance set-top box (STB) with 4K/UHD
video support and is able to deliver to your home the exciting world of cutting edge
interactive services.

This manual contains a description of all possible features and options of SML-5041W,
however your device may look slightly different from the one pictured in this document.
The packaging and configuration of your device, such as presence or absence of
certain connectors, are defined by the service provider.

Information about interactive television services available through the STB is given by
your service provider in a separate manual (not included).

Distribution kit

SML-5041W IPTV Set-top box

Power adapter 12 V, 1.2 A

Safety and storage

Read this manual before using the STB. Please, follow the precautions and operating
instructions.

Do not open or repair the STB by yourself. Improper repair may result in electrical

shock or fire. In addition, the STB is removed from the warranty.

The STB is intended for the indoors use only, with air temperature from 0°C to

35°C (from 32°F to 95°F) and 30-70% of relative humidity, non-condensing.

Use only power supplies listed in the user instructions.

Do not use the STB if the power cord is damaged.

To reduce the risk of fire or electrical shock, do not expose the STB to dripping or

splashing and do not place any objects filled with liquids on or next to the STB.

Do not expose the STB to any liquids, rain, steam, moisture or high humidity.

Do not expose the STB to direct sun light.

Do not place the STB near open fire or heating elements.

Do not expose the STB to vibrations or shaking.

Do not use the STB in dusty environments.

If a storm is coming or if you are not going to use the STB for a long time, unplug

the power cord and disconnect the Ethernet cable. This will help to protect the
unit from lightning and power line surges.

Adapter shall be installed near the equipment and shall be easily accessible.

The mains plug of adapter is used to disconnect device from power supply. The

mains plug of adapter shall remain readily operable.

When using the STB with a plasma TV, do not put picture on pause for more than

5 minutes, due to plasma TV screen design it could lead to display damage.
The STB manufacturer is not responsible for any damage caused in such
manner.

The software on your STB is updated automatically. Do not unplug the power cord

and do not disconnect the Ethernet cable while the software is updating. The
STB manufacturer is not liable for any consequences of incorrect software
update.

The manufacturer does not guarantee the absence of interference with other

devices. To eliminate possible interference, increase the distance between the
STB and other equipment, or connect equipment using a different setup.

The device is going to be operated in 5150 to 5250 MHz frequency range. It is

restricted to indoor use only. This device may be operated in Canada.

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator& your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.