Page 1
Smarthome X10 Maxi
Controller
Owners Manual
(#X10SC503)
Page 1 of 7 X10SC503 Rev: 10/7/2011 6:34 PM
Page 2
About X10 Maxi Controller .........................................................................................................................3
Features & Benefits ...................................................................................................................................3
What’s in the Box?..................................................................................................................................... 3
Getting Started ............................................................................................................................................ 4
Setting the X10 Address to an On/Off Button Pair ....................................................................................4
Removing the X10 Address from an On/Off Button Pair........................................................................... 4
Using X10 Maxi Controller..........................................................................................................................5
Using the Buttons ...................................................................................................................................... 5
Changing the Button Labels ......................................................................................................................5
Advanced Features..................................................................................................................................... 5
Disabling/Enabling the Beeper ..................................................................................................................5
Disabling/Enabling the Status LED ...........................................................................................................5
Resetting an On/Off Button Pair................................................................................................................ 6
Factory Reset ............................................................................................................................................6
Specifications.............................................................................................................................................. 6
Troubleshooting.......................................................................................................................................... 6
Certification and Warranty .........................................................................................................................7
Certification................................................................................................................................................ 7
Limited Warranty .......................................................................................................................................7
Page 2 of 7 X10SC503 Rev: 10/7/2011 6:34 PM
Page 3
About X10 Maxi Controller
This tabletop controller gives you control of up to five X10 scenes from a single device. Plug in and
program the controller in minutes.
Customizable
label
Hinged
stand
Status LED
On/Off
button pair
Bright/Dim
buttons
All On/All Off
buttons
Features & Benefits
Fully X10 compatible to send commands to any X10 device
Installs and programs in minutes
Each On/Off button pair can be assigned a different X10 address, for control of up to five scenes
Status LED and beeper indicate signal transmission (both features easily disabled)
Customizable label lets you keep track of what scenes are controlled by which button pair
90-day warranty
What’s in the Box?
X10 Maxi Controller
Quick-Start Guide
Page 3 of 7 X10SC503 Rev: 10/7/2011 6:34 PM
Page 4
Getting Started
CAUTIONS AND WARNINGS
Read and understand these instructions before installing and retain them for future reference.
This product is intended for installation in accordance with the National Electric Code and local regulations in the United States or
the Canadian Electrical Code and local regulations in Canada. Use indoors only. This product is not designed or approved for
use on power lines other than 120V 60Hz, single phase. Attempting to use this product on non-approved power lines may have
hazardous consequences.
- Use only indoors or in outdoor rated box
- To reduce the risk of overheating and possible damage to other equipment, do not use this product to control loads in
excess of the specified maximum(s) or, install in locations with electricity specifications which are outside of the product’s
specifications.
Plug X10 Maxi Controller into an unswitched outlet
X10 Maxi Controller’s LED will turn on solid
Assigning an X10 Address to an On/Off Button Pair
1) Simultaneously press & hold the All On and Dim buttons until X10 Maxi Controller beeps
X10 Maxi Controller’s LED will begin blinking
2) Tap the On button of the desired On/Off button pair
X10 Maxi Controller will beep and its LED will continue blinking
3) Open the cover on X10 Maxi Controller by lifting it up at the top. The cover’s hinge is at the bottom of
X10 Maxi Controller.
4) Select the X10 House Code you want to use (A through P). For A through N, tap the button with that
label. For O, tap the All On and Bright buttons simultaneously. For P, tap the All Off and Bright
buttons simultaneously.
X10 Maxi Controller will beep and its LED will continue blinking
5) Select the X10 Unit Code you want to use (1 through 16). For 1 through 14, tap the button with that
label. For 15, tap the All On and Bright buttons simultaneously. For 16, tap the All Off and Bright
button simultaneously
X10 Maxi Controller will double-beep and its LED will turn on solid
6) Close the cover on X10 Maxi Controller
Removing an X10 Address from an On/Off Button Pair
1) Simultaneously press & hold the All On and Dim buttons until X10 Maxi Controller beeps
X10 Maxi Controller’s LED will begin blinking
2) Press & hold the Off button of the desired On/Off button pair until it double-beeps
X10 Maxi Controller’s LED will stop blinking and turn on solid
Page 4 of 7 X10SC503 Rev: 10/7/2011 6:34 PM
Page 5
Using X10 Maxi Controller
Using the Buttons
Button Applies to Tap Press & Hold
On
Off
All On
All Off
Bright
Dim
NOTE: Non-dimmable devices will not be affected when the Bright or Dim buttons are used. Pressing &
holding the On/Off button pairs also does not affect non-dimmable devices.
Specifically assigned X10
address
Specifically assigned X10
address
All X10 addresses assigned to
X10 Maxi Controller
All X10 addresses assigned to
X10 Maxi Controller
X10 address assigned to the last
On/Off button pair used
X10 address assigned to the last
On/Off button pair used
Changing the Button Labels
The smoked plastic cover over the button labels will pop off by lifting from the sides.
Ramp to On-Level Brighten until released
Ramp to Off Dim until released
Ramp to On-Level N/A
Ramp to Off N/A
Brighten a little (increments of
32 steps)
Dim a little (increments of 32
steps)
Brighten until released
Dim until released
Download label templates at: www.smarthome.com/files/24
30-4071_Label_Print.zip
Advanced Features
Disabling/Enabling the Beeper
With the beeper turned off, X10 Maxi Controller will no longer beep during button presses. However, the
beeper will still sound when X10 Maxi Controller enters and exits setup modes.
Default: On
1) Simultaneously press & hold the All On and Dim buttons until X10 Maxi Controller beeps
X10 Maxi Controller’s LED will begin blinking
2) Tap the Bright button
X10 Maxi Controller will double-beep and its LED will turn on solid
To re-enable the beeper, repeat steps 1 and 2.
Disabling/Enabling the Status LED
With the LED turned off, X10 Maxi Controller will no longer flash its LED upon button presses. However,
the LED will still function when X10 Maxi Controller enters and exits setup modes.
Default: On
1) Simultaneously press & hold the All On and Dim buttons until X10 Maxi Controller beeps
X10 Maxi Controller’s LED will begin blinking
2) Tap the All Off button
X10 Maxi Controller will double-beep and its LED will turn off
To re-enable the LED, repeat steps 1 and 2.
Page 5 of 7 X10SC503 Rev: 10/7/2011 6:34 PM
Page 6
Resetting an On/Off Button Pair
1) Unplug X10 Maxi Controller for about 10 seconds
2) While holding down the Off button of the pair you want to reset, plug the unit back in
X10 Maxi Controller will beep and its LED will flash twice
3) Wait 3 seconds and then release the Off button
The X10 Maxi Controller LED will flash once
Factory Reset
1) Unplug X10 Maxi Controller for about 10 seconds
2) While holding down the Bright button on X10 Maxi Controller, plug the unit back in
X10 Maxi Controller will beep and its LED will flash and then turn on solid
3) Wait 3 seconds and then release the Bright button
X10 Maxi Controller’s LED should flash once
Specifications
View specifications for X10 Maxi Controller at: www.smarthome.com/X10SC503.html
Troubleshooting
Problem Possible Cause Solution
X10 Maxi Controller’s
Status LED is not
turning on.
X10 Maxi Controller’s
beeper is not working.
X10 devices are not
responding to X10
Maxi Controller.
All of my X10 devices
do not respond to the
Bright and Dim
buttons.
X10 Maxi Controller is
locked up.
If you have tried these solutions, reviewed this Owner’s Manual, and still cannot resolve an issue you are
having with X10 Maxi Controller, please call: 800-762-7845.
X10 Maxi Controller may
not be getting power.
The LED may have been
disabled.
The beeper may have
been disabled.
X10 Maxi Controller and
the controller may be on
opposite phases.
X10 Maxi Controller may
be plugged into a power
strip.
Other modules may be
loading down the signal or
creating too much noise.
The Bright and Dim
buttons only control the
X10 scene assigned to the
last On/Off button pair
tapped.
A surge or excessive
noise on the power line
may have glitched it.
Make sure X10 Maxi Controller is not plugged into
a switched outlet that is turned off.
Re-enable the LED.
Re-enable the beeper.
Install an X10 signal bridge or coupler to bridge the
power line phases.
Power line signals can’t travel through power
filters. Plug X10 Maxi Controller directly into a wall
outlet.
Move the other modules to different areas of your
home to reduce noise on the power line.
Install a noise filter between the X10 Maxi
Controller and the noise-producing device.
Tap the On button of the scene you want to control
and then use the Bright and Dim buttons.
Unplug X10 Maxi Controller for at least 10 seconds
and then reinstall.
If the above doesn’t work, perform a factory reset.
Page 6 of 7 X10SC503 Rev: 10/7/2011 6:34 PM
Page 7
Certification and Warranty
Certification
This product has been thoroughly tested by ITS ETL SEMKO, a nationally recognized independent third-party testing laboratory. The North American
ETL Listed mark signifies that the device has been tested to and has met the requirements of a widely recognized consensus of U.S. and Canadian
device safety standards, that the manufacturing site has been audited, and that the manufacturer has agreed to a program of quarterly factory followup inspections to verify continued conformance.
Limited Warranty
Seller warrants to the original consumer purchaser of this product that, for a period of 90 days from the date of purchase, this product will be free from
defects in material and workmanship and will perform in substantial conformity to the description of the product in this Owner’s Manual. This warranty
shall not apply to defects or errors caused by misuse or neglect. If the product is found to be defective in material or workmanship, or if the product
does not perform as warranted above during the warranty period, Seller will either repair it, replace it, or refund the purchase price, at its option, upon
receipt of the product at the address below, postage prepaid, with proof of the date of purchase and an explanation of the defect or error. The repair,
replacement, or refund that is provided for above shall be the full extent of Seller’s liability with respect to this product. For repair or replacement during
the warranty period, call the Tech Support at 800-762-7845 with the Model # and Revision # of the device to receive an RMA# and send the product,
along with all other required materials to:
Smarthome
ATTN: Receiving
16542 Millikan Ave.
Irvine, CA 92606-5027
Limitations
The above warranty is in lieu of and Seller disclaims all other warranties, whether oral or written, express or implied, including any warranty or
merchantability or fitness for a particular purpose. Any implied warranty, including any warranty of merchantability or fitness for a particular purpose,
which may not be disclaimed or supplanted as provided above shall be limited to the 90-day of the express warranty above. No other representation or
claim of any nature by any person shall be binding upon Seller or modify the terms of the above warranty and disclaimer.
Home automation devices have the risk of failure to operate, incorrect operation, or electrical or mechanical tampering. For optimal use, manually verify
the device state. Any home automation device should be viewed as a convenience, but not as a sole method for controlling your home.
In no event shall Seller be liable for special, incidental, consequential, or other damages resulting from possession or use of this device, including
without limitation damage to property and, to the extent permitted by law, personal injury, even if Seller knew or should have known of the possibility of
such damages. Some states do not allow limitations on how long an implied warranty lasts and/or the exclusion or limitation of damages, in which case
the above limitations and/or exclusions may not apply to you. You may also have other legal rights that may vary from state to state.
© Copyright 2011 Smarthome, 16542 Millikan Ave., Irvine, CA 92606, 800-762-7845, www.smarthome.com
Page 7 of 7 X10SC503 Rev: 10/7/2011 6:34 PM
Loading...