Smarthome® SELECT™
Bluetooth
®
Wireless Stereo Audio Receiver
DESCRIPTION
The Smarthome SELECT Bluetooth Wireless Stereo Audio Receiver allows you to stream audio from
Bluetooth-enabled devices such as a smartphone, tablet, PC, laptop, or any other devices that supports A2DP
audio. The wireless receiver connects to a stereo amplifier using the included stereo audio cabl e. O n ce your
Bluetooth device is paired with the wireless receiver you can stream audio through the wired connection to an
amplifier and out to the amplifier speakers.
Bluetooth wireless technology is a short-rang wireless technology that enables wireless data communication
between digital devices. Bluetooth wireless technology operates within a range of approximately 10 meters (30
feet).
PARTS LIST
Wireless Receiver
Power Supply
Stereo Cable
FEATURES AND SPECIFICATIONS
Wireless Receiver
Front: 1x - Blue LED status indicator for pairing
Rear: 2x - Two audio outputs available:
1x - 3.5mm stereo output
1x - RCA (L/R)
1x - DC 5V jack
Power Supply
1x - 5VDC, 500mA
Stereo Cable
1x - Male dual-RCA to single-stereo
3.5mm plug cable; 1 meter long
ADDITIONAL SPECIFICATIONS
◤ Bluetooth Specification: Version 2.1
◤ Communication System: A2DP (Advanced Audio Distribution Profile): Transmitting or receiving audio content of
high-quality
◤ Unique 4-digit alpha-numeric ID for identifying each individual receiver when multiple units are used in one house
◤ Frequency Response: 20 to 20 kHz (+/- 3dB)
◤ Reception Range: Up to 10 meters (approximately 30 feet) depending on housing structure and environmental conditions
◤ For indoor use only. Keep away from extreme temperatures, humidity, and moisture
◤ Dimensions – 4.1” (105mm) W x 1.3” (32mm) H x 2.2” (56mm) D
Notes:
◤ To be able to use the Bluetooth function, the Bluetooth device to be connected requires the same audio profile as this unit’s
audio profile (A2DP)
◤ Bluetooth version 2.1 for high quality audio with limited interference, lower power consumption and easy connection
OPERATIONS AND PROCEDURES OF PAIRING:
Plug and play operation:
1. The wireless receiver unit will power on autom atic all y when the power supply is connected and plugged in
2. Connect the included audio cable between the wireless receiver and your amplifier.
Pairing Procedure:
1. Place the Bluetooth device within 1 meter (approximately 3 feet) of the wireless receiver.
2. Perform the pairing procedure on the Bluetooth devic e that you will be using to detect the wireless receiver. The list of
detected devices appears on the display of the Bluetooth device. The wireless receiver will appear as “Audio Adapter
XXXX.” If it does not appear, unplug the wireless receiver, then plug it in again after 5 seconds and repeat above
procedure.
3. Select ”Audio adapter XXXX” on the display of the Bluetooth device.
4. Input passkey/pin code “0000” – this is always required for first time connection.
5. Start the Bluetooth connection from the Bluetooth device.
Note:
The wireless receiver is capable of storing up to 8 pairings. Additionally, it is able to automatically reconnect to the last paired
device.
Notes on Bluetooth operations
1) Working mode/sleep mode:
There are 3 minutes of working time f or the Bluetooth pairing connection from the tim e when the wireless receiver is
powered on and enters into a working mode.
If there is no pairing connection made within 3 minutes, the wireless recei ver will enter into a sleep mode and the pair
option will no longer be available until the Bluetooth receiver has been reset via a power off and power on (unplug and then
plug in again).
The Bluetooth receiver will wake up manuall y by any one of the previous ly 8 paired devices for a connection even if the
wireless receiver is in sleep mode.
Loading...