Page 1
Tie Rack
Operating Instructions
Model # ST-72
Read all instructions carefully before using this item
Page 2
Assembly
A. Tie Rack Body (1)
B. Tie Rack Cover (1)
C. Belt Hooks (4)
D. Large Screws (2)
E. Small Screws (2)
F. Battery Lid
Place batteries in battery compartment A.
according to indications and replace battery lid
(F).
Insert the belt hooks (C) into their B.
designated slots, and twist to the left to tighten
Choose a space for your rack on your C.
closet rod. With the light facing front, place the
rack body(A) on the bottom of your rod and the
rack cover(B) directly over it. Depending on
your closet rod, choose either the small or large
screws to secure. Tighten screws by hand
Page 3
Operation
Press either the right or left button on the A.
front of the tie rack. The lamp will light up, and
the rack will start revolving.
Press the button again to stop the B.
movement. The buttons should be centered and
balanced in order for movement to stop.
To replace bulb, insert a at in the tiny C.
gap between the bulb cover and body of the
machine. Slip bulb cover off. Change the bulb
and place back the cover.
Page 4
Warranty
This product has a warranty for 6 months from
provable date of purchase against defects in material
and workmanship.
During this period such defects will be repaired, or the
product will be replaced at no charge.
This warranty does not cover damage caused by
misuse, negligence or improper installation. Warranty
is also invalid in any case that the product is taken
apart or serviced by an unauthorized service station.
TO CLAIM
Send your package postage prepaid with a copy of
your proof of purchase. You should enclose a letter
explaining the nature of your difculty in detail. Please
allow 2-4 weeks for return shipping.
Distributed By:
Smartek USA Inc
www.smartekusa.com
Loading...