Smart Cabling & Transmission TPP016VPD,TTP111VP,TTP111VPC,TTP111VPD-RJ45,TTP111VP3,TTP111HDP,TTP111HDP-L,PC500,PC1A,TTP111HDPD-RJ45 User Manual

1

16 Channel Video, Power CCTV Hub with AC Power Supply in 1U

Rack Mounting Hub

ITEM NO.: TPP016VPD, TTP111VP, TTP111VP3, TTP111VPC, TTP111VPD-RJ45

TTP111HDP, TTP111HDP-L, TTP111HDPD-RJ45, PC500,PC1A

The 16-channel TPP016VPD CCTV hub is using standard CAT5e & RJ45 structured building wiring
to carry video, power and data for simplifying short range installation by centralizing power and
reducing installation labor costs. The built in 10AMP AC24V power supply could support
at-distance camera loads up to 500mA per channel. Each port built in switch to set the unit to
power 2 pairs or 3 pairs. To use with TTP111VP3/ TTP111VPC/TTP111VPD-RJ45 at regular
analog camera side or using with TTP11HDP/TTP111HDP-L/TTP111HDPD-RJ45 at
HD-TVI/AHD/HDCVI camera side to send video, power or data for cable runs 300 meters (max.)

TPP016VPD 16 Channel Passive Video, Power, Data CCTV Hub

with AC Power Supply in 1U Rack Mounting Hub

 TPP016VPD CCTV hub Integrate and send video and power, data over a single 4 pairs

CAT5 cable up to 300 meters.

 Video support: Composite Video, HD-TVI, AHD, HDCVI.
 Built in switch at each port to set unit for “2 pair power + 1 pair data” mode or “3 pairs

power” mode.

 Power cameras via 2 or 3 pairs UTP cable for variety distances (please refer to below

power distance chart).

 Use with video& power Balun TTP111HDP/TTP111HDP-L(AC24V camera) or add model no:

PC500/PC1A power converter (AC24V to DC12V regulated) at DC12V camera side, to
send video and power only.

 Use with TTP111HDPD-RJ45 video, power, data combiner at the camera side, to send

video, power and data.

 10 Amp AC24V power, each port output current up to 1.1Amp for camera, max up to

10Amp.

 Built in “no fuse breaker” to avoid current overload.
 Built in PTC (positive temperature coefficient) for short protection and auto rework on

each port.

 Perfect cable management solution from the camera to the wiring station, control room.

Optional Model: Work with Regular Analog Camera

TTP111VP Video & Power Transceiver for AC24V Camera (2 pairs)

 Video (one pair) and remote power (2pairs) transmission over one 4pairs CAT5 cable.

 Transmission range up to 300 meters (max.)
 BNC for video, power cord for power, RJ45 female output for video and power.
 Eliminates costly coaxial cables and minimize installation time.

 Use with TPP016VPD for 16 channel video, power over professional CAT5 RJ45 connection.

2

TTP111VP3 Video & Power Transceiver for AC24V Camera (3 pairs)

 Identical to TTP111VP, but remote power go through via “3 pairs” to instead of 2 pairs for longer

range.

TTP111VPC Video & Power Transceiver for DC12V Camera

 Video (one pair) and remote power (2 or 3 pairs) transmission over one 4pairs CAT5 cable.
 Built in AC to DC12V regulated power converter, 1000mA max. .

 Built in switch to set unit for “2 pair power through” or “3 pairs power through” mode.

 For DC12V camera use, the power sources convert from TPP016VPD AC24V power for professional

CCTV Industry Installation.

 Transmission range up to 300 meters (max.)
 BNC for video, power cord for power, RJ45 female output for video and power.
 Eliminates costly coaxial cables and minimize installation time.
 Use with TPP016VPD for 16 channel video, power over professional CAT5 RJ45 connection.

TTP111VPD-RJ45 Video, Power, Data Transceiver

 Video, low voltage camera power, Data (RS422, 485) transmission over one standard CAT 5 cable.
 Male BNC with 2 mini-coax pigtail to RJ45 connector.
 Built in PTC fuse for short protection.
 Transmission range up to 300 meters (max.)
 Use with TPP016VPD at camera side, 16 channel video, power, data over professional CAT 5 RJ45

connection.

Optional Model: Work with HDTVI/AHD//HDCVI Analog Camera

TTP111HDP HD-TVI/AHD/HDCVI HD Video & Power Balun______

 Transmit HD-TVI/AHD/HDCVI video and power over one CAT5e cable.
 Video (one pair) and remote power (3pairs) transmission over one 4pairs CAT5 cable.

3

TTP111HDP-L HD-TVI/AHD/HDCVI HD Video & Power Balun_

 Identical to TTP111HDP, but with 10cm mini coax cable for easy mounting.

TTP111HDPD-RJ45 HD-TVI/AHD/HDCVI Video Power Data Balun

 HD-TVI/AHD/HDCVI video, low voltage camera power, Data (RS485) transmission over one Cat5e cable.

PC500 AC to DC 12V Power Converter 500mA

 AC to DC12V Power Converter with DC plug cable 500mA Max.
 Input power: AC15~26V; DC15~28V.
 Output Power: DC12V regulated.
 For DC type camera or video power sources convert using AC24V for professional CCTV Industry

Installation.

PC1A AC to DC 12V Power Converter 1Amp

 Identical to PC500, but with 1000mA max.