![](/html/3e/3ee8/3ee8cbaf988455cf0a0abcf0e342f149cd5b3127933d74dcadc542840b8c9c67/bg1.png)
IP/PoE CABLING TRANSMISSION
ITEM NO.: IP03P PoE Extender over Coax/Two Wire
IP03P PoE Extender is designed to send and extend Ethernet network with PoE can be
established using existing cables up to 600M. You can use Coax cable either any two-wire
cables (UTP cable, telephone line, antenna cable, or bell wire) that is no longer in use to
connect a 10/100Mbps PoE device, IP telephone, PC…etc without having to lay any new cables.
Extended pass through PoE to allow a single PoE source, such as a PoE network switch (IEEE
802.3af/at) to provide power to both TX/RX and the IP/PoE camera use. It is perfect solution
for extended distance data and power transmission for warehouses, parking lots, campuses,
casinos and many more.
IP03P PoE Extender over Coax/Two Wire
Extend POE signal up to 600M, Ethernet or any TCP/IP devices up to 1000M.
Ethernet and PoE data over coax or any two wire cables (UTP, telephone, bell, alarm,
power cables.
Support 10/100 Mbps transmission rate.
Power source either from PoE Switch or external DC power adapter option. (order
separately)
Provides pass-through PoE up to IEEE802.3at 30W.
Provides DC12V 1Amp power to camera.
Support high power PoE to PTZ cameras at long distances.
IP03P Power Source Option Model:
DC48V 40W power adapter: SWP480830
DC56V 70W power adapter: SWP551260
High Power PoE Injector/ PoE Switch: IP06I, IP06H
Installation View:
1. Connect IP03PT, IP03PR with any two wire cable at both ends before powering.
2. Power input source could use PoE Injector/Switch either optional DC 48V, DC56 power
adapter to IP03PR unit and camera use.
![](/html/3e/3ee8/3ee8cbaf988455cf0a0abcf0e342f149cd5b3127933d74dcadc542840b8c9c67/bg2.png)
Different Two Wire Cables Distance Chart for Reference:
Please note the cable quality, length and diameter of two wires used all have
an influence on the transfer of data and the PoE output.