XTREEM-WALL
User Manual
4K INPUT MULTI-FORMAT 2X2 VIDEO WALL CONTROLLER
Made in U.S.A. www.SmartAVI.com 1-800-AVI-2131
1
TABLE OF CONTENTS
WHAT'S IN THE BOX? 2
INTRODUCTION
FEATURES
APPLICATIONS 3
TECHNICAL SPECIFICATIONS
HARDWARE INSTALLATION
FRONT PANEL CONTROL
IR REMOTE CONTROL
CONTROL VIA NETWORK 9-14
PRE-DEFINED DISPLAY MODES
LIMITED WARRANTY STATEMENT 16
3
3
4
5-6
7
8
15
WHAT’S IN THE BOX?
PART NO. QTY DESCRIPTION
XTRW-S
RMT-XW 1 IR Remote Control
SM-EYE3 1 IR Receiver
PS12VDC3.33A 1 Power Adapter
1 Quick Start Guide
Brackets for mounting this device in a standard 19” rack can be ordered from SmartAVI.
1
4K IN-HD OUT HDMI/DP/DVI-I Video Wall Controller
Figure 2-1
2
INTRODUCTION
The XTREEM-WALL is Smart-AVI’s easiest and most effective solution for building creatively configured
video walls. With multi-format inputs for video resolutions up to 4K (3840x2160 @ 30Hz), the XTREEMWALL sends multi-screen imagery to four connected HDMI displays in 1080p Full HD (1920x1080 @
60Hz) output.
Best of all, the XTREEM-WALL is highly compatible with the most popular displays on the market, and features a wide variety of video wall modes.
FEATURES
INPUT: (1) DP, (1) DVI-I Full HD Input, (1) HDMI 4K Input
OUTPUT: (4) 1080p HDMI, (1) HDMI Local Loop
Input up to 4K (3840x2160 @ 30Hz)
Output up to 1080p (1920x1080 @ 60Hz)
Creative configuration modes, including: Full Video Wall | Clone | PIP | POP | Flip
Supports VGA & Y/Pb/Pr (With DVI-I Adapter)
Supports IR remote control
Control over web console
Plug-and-Play ready
Front Panel Buttons: XTREEM-WALL features a button control panel for switching between sources
and accessing preset configurations.
Web Console: Control everything from source resolution and aspect ratios to creative display modes
from anywhere in the world over the Internet with SmartAVI’s easy-to-use web console for the XTREEM
-WALL.
APPLICATIONS
Corporate or Educational Presentations
Airport Installations
Wall Displays
Digital Signage
Dealer Rooms
Control Rooms
Shopping Centers
Security
Point-of-Sale
Entertainment Venues
Corporate Lobbies
Restaurants
3
TECHNICAL SPECIFICATIONS
VIDEO (and AUDIO)
Video Format DP, DVI-I, HDMI
Video Input (1) DP; (1) DVI-I; (1) HDMI, VGA & Y/Pb/Pr support w/ DVI-I adaptor
Video Output (4) HDMI 2.0 (1) HDMI Loopback
Input Resolution Up to 4K (3840x2160 @ 30Hz)
Output Resolution Up to 1080 (1920x1080 @ 60Hz)
Audio Input/Output HDMI Digital Audio
Compliance HDCP Compliant
CONTROL
Front Panel Buttons
TCP/IP
IR Remote Control
Web Console
RC-100 Infrared Remote Control with IR-EYE3 receiver
OTHER
RS-232 DB9 Female, 115200 bps, N, 8 1, No flow control (For firmware updates only)
Power Adapter 12VDC 3.33A
Weight 6.95 lbs.
Dimensions 17”W X 10.8”D X 1.9”H
Working Temp. 32 to 122°F (0 to 50 °C )
Working Humidity Up to 85% RH (no condensation)
Storage Temp. -4 to 149 °F (-20 to 65 °C )
Storage Humidity Up to 90% RH (no condensation)
4
HARDWARE INSTALLATION
1. Make sure the XTREEM-WALL is turned off.
2. Connect up to 3 inputs or sources. (1 DP, 1 HDMI, 1 DVI)
3. Connect up to 4 displays to the HDMI OUTPUT ports on the XTREEM-WALL. See Figure 5-2 for display
locations.
4. Optionally connect a display to the HDMI OUT (Loopback) port.
5. Optionally connect the IR receiver to the IR input jack on the back of the XTREEM-WALL.
6. Optionally connect a network with a cat5/6 cable to the RJ45 LAN connector on the back of the
XTREEM-WALL.
7. Turn on the XTREEM-WALL.
8. Wait for the unit to initialize.
NOTE: The RS-232 port on the back of the XTREEM-WALL is for firmware updates only.
Figure 5-1
Connect HDMI Output port 1 to the upper left display.
Connect HDMI Output port 2 to the upper right display.
Connect HDMI Output port 3 to the lower left display.
Connect HDMI Output port 4 to the lower right display.
Figure 5-2
Figure 5-3
5
HARDWARE INSTALLATION (Continued)
Figure 6-1 below shows a configuration using an HDMI source to display a video wall plus an additional
display using the HDMI Out loopback port.
Figure 6-1
Figure 6-2 below shows a configuration using a DVI input for the video wall while using the HDMI loopback ports to connect an additional display.
Figure 6-2
6
FRONT PANEL CONTROL
To switch between listed sources, press:
1. DVI
2. HDMI
3. DisplayPort
To switch to Video Wall mode, press the WALL button.
To switch to Clone mode, press the CLONE button.
Loading predefined display modes. First press the MACRO button. Then press:
1 =
2 =
3 =
4 =
5 = Standard video wall. Same as WALL button.
VIDEO WALL MODE
CLONE MODE
An Image can be displayed
across four HD screens
2X2.
Figure 6-1
The image can be displayed on each display individually.
Figure 6-2
7
IR REMOTE CONTROL
BUTTON DESCRIPTION
HDMI Select HDMI input port
DVI Select DVI input port
DP Select DP input port
Info Current settings will display
MENU Turns on OSD (On Screen Display)
Back Moves back 1 menu
Exit Exit OSD
▲ OSD (On Screen Display) Navigation
▼
◄
►
OK Executes selection or opens menu
OTH Opens selected Menu
OSD
TIME OUT
VIDEO
WALL
OSD (On Screen Display) Navigation
OSD (On Screen Display) Navigation
OSD (On Screen Display) Navigation
Sets time before OSD turns off
Opens OSD for output settings
8
CONTROL VIA NETWORK
XTREEM-WALL TCP/IP control is a feature that allows mode switching and other configurations to be controlled remotely via HTTP. Manage your XTREEM-WALL with ease from anywhere in the world.
First you must find the IP address for the
XTREEM-WALL . Finder.exe (Smart IPFinder) is conveniently available on our
website; please visit www.smartavi.com/
helpful-links.html for this and our full list
of compatible third-party software.
Download and execute the IP address
Finder software for your product. The
XTREEM-WALL and its IP address should
appear in the display as shown in Figure
9-1.
Figure 9-1
Enter the IP address into a web browser of your choice. You should see the XTREEM-WALL LOG-IN page as
shown in Figure 9-2. The default username is ADMIN and the default password is PASS.
Figure 9-2
9
CONTROL VIA NETWORK (Continued)
Click the “XTREEM-Wall” tab in the
top row and then click the “Current”
tab in the second row to see the current status of the XTREEM-WALL.
Click the “XTREEM-Wall” tab in the
top row and then click the “Video
Wall” tab in the second row. Here you
can select the source port for your
video wall display.
10
Click the “XTREEM-Wall” tab in the
top row and then click the “Video Wall
Clone” tab in the second row. Here
you can select the source port for
your video wall display.
CONTROL VIA NETWORK (Continued)
Click the “XTREEM-Wall” tab in the
top row and then click the “Video
Wall Flip” tab in the second row.
Here you can select the source port
for your video wall display.
Figure 11-1
Why Video Wall Flip?
Many HDTV displays have a bezel that is wider on the
bottom than it is on the top and sides as shown in figure 11-1. The Video Wall flip feature fixes this by allowing you to flip the top two displays in your video
wall 180 degrees so the wide edges are on the outside of your video wall as shown in figure 11-2. Now
select your source on the Video Wall Flip page and
the video output to the top two displays will rotate
180 degrees as shown in figure 11-3.
Figure 11-3
Figure 11-2
11
CONTROL VIA NETWORK (Continued)
Click the “XTREEM-Wall” tab in the
top row and then click the “PiP” tab in
the second row. Here you can select
the source port (Master) for your
video wall and the PiP port (Slave)
that will appear smaller and center
screen.
Click the “XTREEM-Wall” tab in the
top row and then click the “PiP Clone”
tab in the second row. Here you can
select the source port (Master) for the
background image on each display
and the PiP port (Slave) that will appear smaller and centered in each
display.
12
CONTROL VIA NETWORK (Continued)
Click the “XTREEM-Wall” tab in the
top row and then click the “PiP Flip”
tab in the second row. Here you can
select the source port (Master) for
your video wall and the PiP port
(Slave) that will appear smaller and
center screen.
Figure 13-1
Why PiP Flip?
Many HDTV displays have a bezel that is wider on the
bottom than it is on the top and sides as shown in figure 13-1. The Video Wall flip feature fixes this by allowing you to flip the top two displays in your video
wall 180 degrees so the wide edges are on the outside of your video wall as shown in figure 13-2. Now
select your source on the Video Wall Flip page and
the video output to the top two displays will rotate
180 degrees as shown in figure 13-3.
Figure 13-3
Figure 13-2
13
CONTROL VIA NETWORK (Continued)
Click the “XTREEM-Wall” tab in the
top row and then click the “PoP” tab
in the second row. Here you can select the source port for the left 2 displays and the source port for the right
2 displays.
The XTREEM-WALL’s PoP feature creates 2 separate displays from 2 sources with 2 stacked monitors per
display. The Input sources are sent to the output ports as shown in Figure 14-1.
Figure 14-1
14
PRE-DEFINED DISPLAY MODES
Figure 15-1
The XTREEM-WALL has several pre-defined display modes accessible with the remote control and on
screen menus.
2x2 with clockwise 15 degree rotation and TV2 & TV4 shifted up
1/2 panel height (Ratio 1.7)
Figure 15-2
2x2 with TV2 & TV4 shifted down 1/2 panel
height (Ratio 1.42)
Figure 15-3
15
LIMITED WARRANTY STATEMENT
A. Extent of limited warranty
Smart-AVI Technologies, Inc. warrants to the end-user customers that the Smart-AVI product specified above
will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on
the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase.
Smart-AVI limited warranty covers only those defects which arise as a result of normal use of the product,
and do not apply to any:
a. Improper or inadequate maintenance or modifications
b. Operations outside product specifications
c. Mechanical abuse and exposure to severe conditions
If Smart-AVI receives, during applicable warranty period, a notice of defect, Smart-AVI will at its discretion
replace or repair defective product. If Smart-AVI is unable to replace or repair defective product covered by
the Smart-AVI warranty within reasonable period of time, Smart-AVI shall refund the cost of the product.
Smart-AVI shall have no obligation to repair, replace or refund unit until customer returns defective product
to Smart-AVI.
Any replacement product could be new or like new, provided that it has functionality at least equal to that of
the product being replaced.
Smart-AVI limited warranty is valid in any country where the covered product is distributed by Smart-AVI.
B. Limitations of warranty
To the extant allowed by local law, neither Smart-AVI nor its third party suppliers make any other warranty or
condition of any kind whether expressed or implied with respect to the Smart-AVI product, and specifically
disclaim implied warranties or conditions of merchantability, satisfactory quality, and fitness for a particular
purpose.
C. Limitations of liability
To the extent allowed by local law the remedies provided in this warranty statement are the customers sole
and exclusive remedies.
To the extant allowed by local law, except for the obligations specifically set forth in this warranty statement,
in no event will Smart-AVI or its third party suppliers be liable for direct, indirect, special, incidental, or consequential damages whether based on contract, tort or any other legal theory and whether advised of the
possibility of such damages.
D. Local law
To the extent that this warranty statement is inconsistent with local law, this warranty statement shall be
considered modified to be consistent with such law.
16
NOTICE
The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced, or translated into another language without
prior written consent from SmartAVI Technologies, Inc.
20170425
Designed and Manufactured in the USA
800.AVI.2131
Tel: (818) 503-6200 | Fax: (818) 503-6208
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
17
Loading...