SMART-AVI XTAV-TX, XTAV-RX, XT-AV User Manual

© Copyright 2008 Smart-AVI, All Rights Reserved

Notice

The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties
of merchantability and fitness for any particular
purpose.

Smart-AVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.

No part of this document may be photocopied,
reproduced or translated into another language
with
out prior written consent from Smart-AVI.

For the complete manual, visit www.smartavi.com.

Use a single CAT5 to broadcast high

resolution SXGA and Stereo Audio up

to 1000ft away.

XT-AV

www.smartavi.com

User Manual

2840 N. Naomi Ave.

Burbank, California 91504

Phone: [phone]

Facsimile: [phone]

Technical Specifications

XP-AV SPECIFICATIONS

VGA Data

Format RGBHV, RGsB, YUV, Y/C, CVBS

Resolution

Up to 1900 x 1200
VGA, SVGA, XGA, SXGA)

Connector type HD 15 socket

Audio

Signal Type Stereo unbalanced

Connector 3.5mm jack socket

Power

Requirements 5VDC @.5A

Connector 2.1mm DC jack (center +ve)

Physical

Dimensions 135 x 90 x 23mm (26 with pegs)

Weight .8 lbs or .36 kg

Introduction

The XT-av range of products allows the extension of
a wide range of video and audio formats via a single

Category 5 Unshielded Twisted Pair (UTP) cable.

Features

 Uses easy to install, inexpensive CAT-5/5e/6/7/8.

 Output reaches up to 1,000 feet (300 m).

 Resolutions up to 1900x1200.
 300 MHz Bandwidth.
 Sends high-resolution UXGA, Stereo Audio and
 Compatible with VGA, XGA, Sun, MAC and SGI
 Sync Format / Polarity Preservation.
 Compatible with Line Level Stereo Audio Signals.
 High ground loop immunity.
 Built-in lightning, power surge and transient

protection.

 Designated trimmer in the remote unit to

compensate for cable length.

 Compact Metal Case Enclosure.

What’s in the box?

XT-AV

Please check the contents of the package before
beginning installation.

Preparing & Connecting System CAT5 Cable

Following is the wiring standard for terminating CAT 5 cable
using RJ-45 connector:

Pair 1 Pins 1 & 2
Pair 2 Pins 3 & 6
Pair 3 Pins 4 & 5
Pair 4 Pins 7 & 8

Connectors: RJ-45
Capacitance: 14 pf/ft (46.2 pf/m)
Conductor Gauge: 24 AWG
Impedance: 100 +/- 15 ohms
4 - Pair

Connecting The Transmitter

1. Connect the output of the computer video card to the
video input of the transmitter using the included male
to male video cable.

2. Connect the output of the computer audio card to the
audio input of the transmitter using 3.5mm audio

male to male audio cable.

3. Connect external speakers to the transmitter’s audio
out (Standard 3.5mm stereo miniplug).

4. In the back of the unit connect the CAT5 cable that
will connect to the receiver (XTAV-RX).

Connecting The Receiver

Connect CAT5 cable (coming from the transmitter) 1.
to the back of the receiver.
Connect display monitors to the VGA out connec-2.
tor on the front of the receiver.
Connect external speakers to the audio 3.
output connections on the front of the unit.
(Standard 3.5mm stereo Miniplug)

XT-AV Package Content

Qty Items Part No.

1 XT-AV Transmitter unit XTAV-TX

1 XT-AV Receiver unit XTAV-RX

2 5 volt dc power supply PS-5D1A-US

1

HDD 15 male to male VGA cable
(6ft)

CC-VGAMM-06

Installation Diagram