What’s in the Box?
PART NO. QTY DESCRIPTION
UX-RXPLUS 1 WUXGA+USB Receiver. Includes PS5VDC2A
UX-TXPLUS 1 WUXGA+USB Transmitter. Includes PS5VDC2A
Power Supply 2 PS5VDC2A
CCKVMUSB6F 1 Assembled KVM USB Cable, 6ft.
Technical Specications
VIDEO
Format RGBHV, RGsB, YUV, Y/C, CVBS
Resolution Up to 1920 x 1200 VGA, SVGA, XGA, SXGA, UXGA, WUXGA
Input Interface (TX) (1) HD-15 Male / USB
Output Interface (TX) (1) HD-15 Female (for local display)
Output Interface (RX) (1) HD-15 Female
USB
Signal Type USB 1.1
Input Interface (TX) (1) HD-15 Male / VGA
Output Interface (TX) (2) USB Type A (Female)
(for local keyboard and mouse)
Output Interface (RX) (2) USB Type A (Female)
OTHER
Power External 100-240 VAC/5VDC2A @10W
Dimensions 5 in W x 1 in H x 3 in D
Weight 1 lb.
Approvals UL, CE, ROHS Compliant
Operating Temp. 32-131°F (0-55 °C)
Storage Temp. -4-185 °F (-20-85 °C)
Humidity Up to 95%
© Copyright 2011 Smart-AVI, All Rights Reserved
NOTICE
The information contained in this document
is subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular purpose.
Smart-AVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced or
translated into another language without prior written consent
from Smart-AVI.
For more information, visit www.smartavi.com.
Rack Mountable Option
Installation
Manual
UX-PLUS
USB KVM Extender
with support for Local Display
We have simplied the output of the UX-PLUS by
consolidating the VGA and USB input into one cable.
Our SmartRack is the perfect solution to allow
virtually all SmartAVI devices to be custom mounted
in a standard 19” server rack. The SmartRack is fully
adjustable and can secure/organize several devices.
SmartAVI, Inc. / Twitter: smartavi
11651 Vanowen St. North Hollywood, CA 91605
Tel: (818) 503-6200 Fax: (818) 503-6208
http://www.SmartAVI.com
Extend and Split WUXGA Video and USB
1.1 Keyboard and Mouse up to 500 feet
over CAT5 Cable
www.smartavi.com
Introduction
The UX-PLUS is a cross-platform WUXGA and USB KVM
switch capable of sharing one computer between two
consoles, one local and one remote.
Product - Installation Diagram
LOCAL DISPLAY
REMOTE DISPLAY
Features
• Supports WUXGA video extension for
resolutions up to 1920 x 1200
• Local WUXGA output for a local display
• Plug and play, no software required
• Fully compliant with USB 1.1 specications
for Keyboard and Mouse
• Built-in skew compensation
• Uses a single CAT5 UTP cable up to 500 feet
• External power adapter for transmitter and
receiver unit
• Fully transparent (does not use any emulation)
Applications
• Security
• PC Networking
• Conference Center Systems
• Point of Sale
• Camera Surveillance
• Video Phone
• Control Room Systems
• Recording Studio
• PC KVM Extension
• MAC Keyboard Mouse Extender
COMPUTER
VGA/USB
VGA VGA
USB USB
UX-PLUS-T X
500 ft over CAT5
UX-PLUS-RX
USB KEYBOARDUSB KEYBOARD
USB MOUSEUSB MOUSE
Installation
1. Turn o the computer and displays.
2. Connect the VGA/USB cable from the computer into the VGA/USB connector on the UX-PLUS transmitter.
3. Connect the local display to the VGA connector on the UX-PLUS transmitter.
4. Connect the local USB keyboard and mouse to the USB connectors on the UX-PLUS transmitter.
5. Connect the remote display to the VGA connector on the UX-PLUS receiver.
6. Connect the remote USB keyboard and mouse to the USB connectors on the UX-PLUS receiver.
7. Connect the power cord to both the UX-PLUS transmitter and receiver.
8. Power on the computers and the display.
UX-TXPLUS-FRONT
UX-RXPLUS-FRONT
In the medical or industrial eld, where it may not be
practical (or safe) to have one or more CPUs in the
general vicinity, SmartAVI’s VNET Switch Series is the
perfect solution, allowing for either PC or Mac signals
to be extended from computer to the display.
UX-TXPLUS-REAR
UX-RXPLUS-REAR
Loading...