What’s in the Box?
PART NO. QTY DESCRIPTION
UTX-TX500 1 UTX-500 Transmitter
UTX-RX500 1 UTX-500 Receiver
PS5VDC2A 2 5 Volt 2 Amp Power Supply
CCUSBAB06 1 6ft USB MM AB cable
CCVGAMM06 1 6ft XVGA MM Cable
© Copyright 2011 Smart-AVI, All Rights Reserved
NOTICE
The information contained in this document
is subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular purpose.
Technical Specications
VIDEO
Format RGBHV, RGsB, YUV, Y/C, CVBS
Resolution Up to 1920 x 1200 VGA, SVGA, XGA, SXGA,
UXGA, WUXGA
Input Interface (TX) (1) HD-15 Female
Output Interface (RX) (1) HD-15 Female
AUDIO
Signal Type Stereo Unbalanced
Input Interface (TX) 3.5 mm Jack Socket (Female)
Output Interface (RX) 3.5 mm Jack Socket (Female)
USB
Signal Type USB 1.1
Input Interface (TX) (1) USB Type B (Female)
Output Interface (RX) (4) USB Type A (Female)
OTHER
Power External 100-240 VAC/5VDC2A @10W
Dimensions 5.5 in W x 1 in H x 3.375 in D
Weight 1 lb
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95%
Smart-AVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced or
translated into another language without prior written consent
from Smart-AVI.
For more information, visit www.smartavi.com.
Rack Mountable Option
Our SmartRack is the perfect solution to allow
virtually all SmartAVI devices to be custom mounted
in a standard 19” server rack. The SmartRack is fully
adjustable and can secure/organize several devices.
Installation
Manual
UTX-500
WUXGA, Audio and USB Extender
over 2 CAT5 Cables
Extend WUXGA Video, Stereo Audio
and USB 1.1 up to 300 feet over 2
CAT5 Cables
SmartAVI, Inc. / Twitter: smartavi
11651 Vanowen St. North Hollywood, CA 91605
Tel: (818) 503-6200 Fax: (818) 503-6208
http://www.SmartAVI.com
www.smartavi.com
Introduction
The UTX-500 extends WUXGA, audio and transparent
USB 1.1 up to 300 feet over two CAT5 cables. The
recevier has an integrated 4-port USB hub. With fully
transparent USB the UTX-500 supports any USB devices
including USB keyboards, mice, cameras, ash drives,
hard drives and more.
Features
• Plug and play, no software required
• Supports WUXGA video extension for resolutions
up to 1920 x 1200
• Fully compliant with USB 1.1 specications
• Supports 1.5 and 12 Mbps data rate
• Built-in skew compensation
• Uses a single CAT5 UTP cable
• External power adapter for transmitter and re-
ceiver unit
• Fully transparent to any type of USB 1.1 device
Applications
• Security
• PC Networking
• Conference Center Systems
• Point of Sale
• Camera Surveillance
• Video Phone
• Control Room Systems
• Recording Studio
• PC KVM Extension
• MAC Keyboard Mouse ExtenderPC KVM Extension
• MAC Keyboard Mouse Extender
Product - Installation Diagram
MONITOR
Up to 275 ft over CAT5
UTX-TX500
COMPUTER
Connecting the UTX-500
1. Power o all devices.
2. Connect the WUXGA video source (computer) to
the front of the UTX-TX500 (transmitter) using a
male-to-male VGA cable.
3. Connect the USB source (computer) to the USB
port on the front of the UTX-TX500 (transmitter).
4. Connect an audio source (computer) to the audio
port on the front of the UTX-TX500 (transmitter).
5. Connect the UTX-TX500 (transmitter) to the UTXRX500 (receiver) using 2 CAT5 cables up to 300
feet in length.
6. Connect a VGA monitor to the front of the UTXRX500 (receiver).
7. Connect up to four USB 1.1 devices to the
integrated 4-port USB hub on the front of the
UTX-RX500 (receiver).
8. Connect speakers to the front of the UTX-RX500
(receiver).
9. Connect the power supply to the UTX-RX500 and
the UTX-RX500.
10. Power on the computer, monitor, USB devices and
speakers.
UTX-RX500
USB HARD DRIVE
USB KEYBOARD
UTX-TX500 Front
UTX-TX500 Rear
UTX-RX500 Front
SPEAKERS
USB MOUSE
USB PRINTER
UTX-RX500 Rear
Loading...