Smart Avi USB2-Mini User Manual

Technical Specications

© Copyright 2014 SmartAVI, All Rights Reserved

ELECTRICAL

Range over
Cat5e/6

150 f t.

US B DATA

USB Fixed
Data Rate

USB Version
Compatibility

USB Connector
Type (TX)

USB Connector
Type (TX)

480Mbps

2.0 and 1.1

(1) Type B

(4) Type A

UTP DATA

Signal Type LVDS

Connector Unshielded RJ-45

POWER

External or via USB 5V DC @ 2mA

Connector 2.1mm DC jack

(center+ve)

PHYSICAL

Dimensions 3.375” x 3.375” x 1.5”

Weight 0.14 l b

Notice

The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of

merchantability and tness for any particular purpose.

SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.

No part of this document may be photocopied,
reproduced or translated into another language
without prior written consent from SmartAVI.

User Manual

USB2-Mini

11651 Vanowen St.

North Hollywood, California 91605

Phone: [phone]

Fax: [phone]

The USB2-Mini extends USB 2.0 up to 150 . from

the computer using a single Cat5e/6 Cable

www.smartavi.com

Introduction

Introduction

The USB-100 extends USB up to 275ft using a single

SmartAVI’s USB2-Mini extends standard USB

unshielded CAT5 cable with data rates up to 12Mbps.

(Universal Serial Bus) 2.0 signals up to 150
feet using a single Cat5e/6 cable. The USB2­Mini supports all USB 2.0 high-speed devices,
from keyboards to printers, and will operate on
Windows®, Mac and Linux® operating systems.

Features

An integrated four-port hub allows for multiple

Extends USB port up to 275 feet from the •

devices to be connected to the USB2-Mini at once.

computer.

Additional USB hubs can be added, increasing the

Uses easy to install, inexpensive CAT5.•

amount of devices that can be plugged into the

Fully compliant with USB 1.1 specifications.•

USB2-Mini.

Supports 1.5 and 12 Mbps data rate.•
Uses a single CAT5 UTP cable between transmitter •

Features

•

and receiver.

• Supports all USB 2.0 and 1.1 Devices

Bus powered transmitter unit•

Transparently

Fully transparent (does not use any emulation).•

(Flash Drives, Printers, etc.)

Compact size.•

• Supports USB 1.1 keyboard and mouse

Supports MAC, PC and SUN.•

• Works on Windows, Mac and Linux Operating

Plug and play.•

Systems

• Integrated Four-Port Hub

• Bus-Powered Local Unit

• Power Adaptor for Remote Unit

• Plug-and-Play Ready

What’s in the box?

USB-100

Part No. Description

Please check the contents of the package before

USB2-Mini-S USB 2.0/1.1 over Cat5e/6 Extender.

beginning installation.

Qty Description Part Number

1 USB-100 Transmitter USB-TX100

Includes: [USB2M-TX, USB2M-RX,
and PS5VD4A]

3. Connect the receiver to the peripheral device using
the included USB-Hub.

4. Join the USB-100 units using standard CAT5 UTP
cable.

1 USB-100 Receiver USB-RX100

1 6’ USB A-B Cable CCUSBAB06

Installation and Operation

Connecting the Transmitter

1. Connect the transmitter to the host using the A-B
USB cable (included with the unit).

2. The A side of the connector would go to the com­puter host and the B side would be connected to
the transmitter.

Note: You must connect the included USB-Hub to the
receiver unit for the system to work properly.

Note:

The receiver provides remote power up to 500
mA to the connected peripherals. This power comes
from the host computer and is passed by the transmitter
to the receiver. In some applications, and external power
supply is required. SmartAVI can provide a power supply
for such cases with the receiver and transmitter units.