Technical Specifications
3MART!UDIO6IDEO)NTEGRATION
3MART!UDIO6IDEO)NTEGRATION
© Copyright 2004 Smart-AVI, All Rights Reserved
langiSeulB,neerG,deR:langisgolanA
cnySelbitapmocLTTlacitreVdnalatnoziroH
esuoMelbitapmoC2/SPdradnatS
oiduAtekcoskcajmm5.3decnalabnUoeretS
rewoPA1CDV5
D
thgieW)bl62.1(gk75.
/noituloseR
ecnatsiD
htdiwdnaBzHM003
draobyeKelbitapmo
lacisyhP
snoisnemi
HxDxW
erusolcnE
lairetaM
munimulA
snoitacificepS002-XS
smhO57p-pV7.0
;tf058006x008;tf0001084x046
x0021;tf007867x4201
.tf0650021x0061
C2/SPdradnatS
;tf0064201
)ni81.1x45.6x92.4(mm03x661x901
Notice
The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular
purpose.
Smart-AVI will not be liable for errors contained herein
or for incidental or consequential damages in
connection with the furnishing, performance or use
of this material.
No part of this document may be photocopied,
reproduced or translated into another language with
out prior written consent from Smart-AVI.
For the complete manual, visit www.smartavi.com.
User Manual
SX-200
3111 Winona Ave., Suite 101
Burbank, California 91504
Phone: (818) 565-0011
Facsimile: (818) 565-0020
Uses a single CAT5 to extend
Keyboard, Mouse, Video and Audio
to a remote location up to 500 ft.
www.smartavi.com
Introduction
The SX-200 is a combination of transmitter and
receiver devices designed to allow access to the PC
from a keyboard, mouse, and monitor at a remote
location up to 500 ft. away. The extension is
accomplished over a single CAT5 cable.
Features
Provides remote access to the PC with keyboard,
mouse and monitor.
Uses a single CAT-5 UTP cable to reduce
installation costs.
Extends signal to a maximum distance of 500ft.
Supports all PC/AT and PS/2 keyboards with
full emulation.
Caps Lock, Num Lock, and Scroll Lock are
automatically saved and restored.
Supports full emulation and conversion on all
PC/AT and PS/2 mice.
Compatible with Windows, NT, OS/2, UNIX,
Linux, and other operating systems.
Supports computer monitors with resolution of
up to 1600x1200.
Offers adjustable cable compensation.
Compact metal enclosure.
Supports stereo audio.
Installation Diagram
Before you power up, ensure that all cables are properly
connected as shown in the diagram below.
What’s in the box?
SX-200SX-200
SX-200
SX-200SX-200
Please check the contents of the package before
beginning installation.
tnetnoCegakcaP002-XStnetnoCegakcaP002-XS
tnetnoCegakcaP002-XStnetnoCegakcaP002-XS
tnetnoCegakcaP002-XS
ytQytQ
ytQytQnoitpircseDnoitpircseD
ytQ
1rettimsnarT002-XS002XT-XS
1revieceR002-XS002XR-XS
2ylppuSrewoP1SU-A1D5-SP
1elbaCMVK60-MMMVK-CC
1elbaCoiduAoeretSmm5.360-MMAMM-CC
noitpircseDnoitpircseDrebmuNtraPrebmuNtraP
noitpircseD
seirosseccAlanoitpOseirosseccAlanoitpO
seirosseccAlanoitpOseirosseccAlanoitpO
seirosseccAlanoitpO
Installation Instructions
System Power UpSystem Power Up
System Power Up
System Power UpSystem Power Up
1. Connect the 5 Volt power supply to the transmitter
rebmuNtraPrebmuNtraP
rebmuNtraP
2. Turn the system on by plugging in the power adapter,
if it is not yet connected.
3. Power up your computer.
4. Observe to see if both transmitter and receiver power
LEDs are ON, and computer has finished the boot
up process.
5. Observe monitor at receiver end to see if signal is
going through.
Quickstart
1. Connect the video out, keyboard and mouse ports
on your computer to the transmitter using the
supplied KVM and audio cables.
3. Connect a power adapter to the transmitter and
the receiver.
4. Connect a CAT5 cable to the transmitter and run it
over to the receiver.
5. Connect peripherals to the receiver. I.E. keyboard,
mouse, monitor, and optional serial device.
6. Once everything is connected power up your
computer and the SX-200 units.
Loading...