Smart AVI SFX-2P Users Guide

Technical Specications

DVI-D VIDEO

Format DVI-D Single Link

Maximum Pixel Clock 165 MHz

Input Interface (TX) (2) DVI-D 29-pin (Female)

Output Interface (RX) (2) DVI-D 29-pin (Female)

Resolution Up to 1920 x 1200 @60Hz

DDC 5 volts p-p(TTL)

Input Equalization Automatic

Input Cable Length Up to 20 ft.

Output Cable Length Up to 20 ft.

USB

Signal Type EHCI (USB 2.0) and OHCI/UHCI (USB 1.1)

Input Interface (TX) (1) USB Type B (Female)

Output Interface (RX) (4) USB Type A (Female)

AUDIO

Signal Type Stereo Unbalanced

Input Interface (TX) 3.5 mm Jack Socket (Female)

Output Interface (RX) 3.5 mm Jack Socket (Female)

RS232

Input Interface (TX) DB9 (Female)

Input Interface (RX) DB9 (Male)

Speed Up to 115 Kbps

OPTICAL

Fiber Type Duplex, multi mode

Connector Type Duplex LC

Wavelength 1310 nm/1550 nm (Dual wavelength)

Data Rate 2x2.5 Gbps (2.5 Gbps per single wavelength)

Transmission Power -5 dB Min.

Receiver Sensitivity -21 dB Max

Distance 500 m Max.

OTHER

Power Internal 100-240 VAC

Dimensions 17 in W x 1.75 in H x 7 in D

Weight 8 lbs.

Operating Temp. 0-55 °C (32-131°F)

Storage Temp. -20-85 °C (-4-185 °F)

Humidity Up to 95%

© Copyright 2012 Smart-AVI, All Rights Reserved

NOTICE

The information contained in this document
is subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular purpose.

Smart-AVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.

No part of this document may be photocopied, reproduced or
translated into another language without prior written consent
from Smart-AVI.

For more information, visit www.smartavi.com.

What’s in the Box?

PART NO. QTY DESCRIPTION

SFX-2P-TX 1 2-Port DVI-D + USB2.0 + Audio + RS232 Ex-

tender Transmitter

SFX-2P-RX 1 2-Port DVI-D + USB2.0 + Audio + RS232 Ex-

tender Receiver

CCPWR06USA 2 6 ft. Power Cable

SmartAVI, Inc. / Twitter: smartavi

11651 Vanowen St. North Hollywood, CA 91605

Tel: [phone] Fax: [phone]

http://www.SmartAVI.com

Installation

Manual

SFX-2P

2-Port DVI-D, USB 2.0, Audio and

RS232 Fiber Extender

www.smartavi.com

Introduction

The SFX-2P is a perfect solution for extending 4 DVI-D
and USB 2.0 signals from a computer in a remote
location up to 1,500 feet away. It supports high­resolution DVI-D video and all USB device types from
high-speed web cams, hard drives, printers, scanners,
audio devices, touch screens, digital cameras and game
controllers. The SFX-2P is immune to electromagnetic
interference, making it ideal for use in situations where
there is considerable interference. The SFX-2P is also
very secure because it’s ber optic signals cannot be
easily tapped.

Product - Installation Diagram

Computer

SFX-2P

Transmitter

Up to 1,500 feet over 3

pair ber optic cables

2 DVI-D Displays

Stereo Speakers

SFX-2P
Receiver

USB 2.0

HARD DRIVE

USB 2.0 WEBCAM

USB 2.0 KEYBOARD

USB 2.0
MOUSE

USB 2.0

PRINTER

Features

• Top Signal Quality at Maximum Extension
Over Multimode Fiber (1,500 ft.) Plug Type LC

• DVI-D Video Resolutions up to 1920 x 1200
WUXGA at 60Hz

• DDC Learning

• Supports USB 1.1 (12 Mbps) and USB 2.0 (480

Mbps) data rates

• Supports all USB device types transparently (no
emulation)from high-speed web cams, hard
drives, printers, scanners, audio devices, touch
screens, game controllers and more Integrated
Four-Port Hub in the receiver

• Compatible with all operating systems

• Extends Stereo Audio

• Extends RS-232

• Plug and play

Connecting the SFX-2P

1. Connect up to 2 DVI-D displays to the DVI-D ports
on the SFX-2P-RX (receiver).

2. Connect up to four USB 1.1 or 2.0 devices to the
integrated 2-Port USB hub on the SFX-2P-RX
(receiver).

3. Connect speakers to the audio port on the SFX-2P­RX (receiver).

4. Connect RS232 devices to the RS232 port on the
SFX-2P-RX (receiver).

5. Connect the power supply to the SFX-2P-RX
(receiver).

6. Power on the displays, USB devices, speakers and
RS232 devices.

7. Connect the SFX-2P-TX (transmitter) to the SFX­2P-RX (receiver) using 3 ber optic cables up to
1,500 feet in length.

8. Connect up to 2 DVI-D sources (computer) to the

Learning the DDC

1. Connect up to 2 DVI-D displays to the DVI-D ports
on the SFX-2P-RX (receiver).

2. Power on the SFX-2P-RX (receiver).

3. Power on the displays.

4. Connect the SFX-2P-TX (transmitter) to the SFX-

2P-RX (receiver) using 3 ber optic cables up to
1,500 feet in length.

5. Power on the SFX-2P-TX (transmitter).

6. Wait 30 seconds until the VIDEO light on the SFX-

2P-TX (transmitter) begins to blink.

7. The VIDEO light will continue to blink for
approximately 10 seconds, then it will be steady
for another 10 seconds.

8. The DDC has been learned.

9. Connect the video sources (computer) to the SFX-

2P-TX and power them on.

DVI-D ports on the SFX-2P-TX (transmitter).

9. Connect the USB source (computer) to the USB
port on the SFX-2P-TX (transmitter).

10. Connect an audio source (computer) to the Audio
port on the SFX-2P-TX (transmitter).

SFX-2P-TX Front

11. Connect the RS232 source (computer) to the

SFX-2P-RX Front

RS232 port on the SFX-2P-TX (transmitter).

12. Connect the power supply to the SFX-2P-TX
(transmitter).

13. Power on the computer or source.

SFX-2P-TX Rear SFX-2P-RX Rear