Page 1
SaviSign P100
Quick Start Guide
800.AVI.2131
Tel: (818) 503-6200 | Fax: (818) 503-6208
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
NOTICE
The information contained in this document is subject to
change without notice. SmartAVI makes no warranty of any
kind with regard to this material, including but not limited
to, implied warranties of merchantability and fitness for
particular purpose.
SmartAVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced,
or translated into another language without prior written
consent from SmartAVI Technologies, Inc.
20170524
Create, distribute, and manage
your signage from anywhere in
the world over the Internet
WIFI Enabled Signage Player
TECHNICAL SPECIFICATIONS
VIDEO
Interfaces
1xHDMI2.0A Output, 1xCVBS Output,
1xOptical Output
VIDEO
DECODING
VP9-10 Profile-2 up to 4K×2K @60fps
H.265 HEVC MP-10 @L5.1 up to 4K×2K
@60fps
H.264 AVC HP @L5.1 up to 4K×2K
@30fps
H.264 MVC up to 1080P @60fps
MPEG-4 ASP @L5.1 up to 1080P @60fps
WMV/VC-1 SP/MP/AP up to 1080P
@60FPS
AVS-P16(AVS+)/AVS-P2 JiZhun Profile up
to 1080P @60FPS
MPEG-2 MP/HL up to 1080P @60FPS
MPEG-1 MP/HL up to 1080P @60FPS
RealVIDEO 8/9/10 up to 1080P
@60FPS
Support MKV/WMV/MPG/MPEG/DAT/
AVI/MOV/ISO/MP4/RM
AUDIO
AUDIO
DECODING
MP3, AAC, WMA, RM, FLAC, Ogg and programmable with 7.1/5.1 down-mixing
I2S audio interface supporting 8-channel
(7.1)input and output
Built-in serial digital audio SPDIF/IEC958
output and PCM input/output
Stereo digital microphone PDM input
Built-in stereo audio DAC
Supports concurrent dual audio stereo
channel output with combination of analog+PCM or I2s+PCM
NETWORK
WIFI
2.4GHz/5.8GHz Dual Band
Ethernet
10M/100M/1000M
Interfaces
1x1000M Lan Port
OTHER
CPU
Amlogic S912 Octa Core Cortex-A53
GPU Mali-T820MP3
RAM 3GB
ROM 32GB
Interfaces
3xUSB2.0 Host
TECHNICAL SPECIFICATIONS
CONTROL
Remote
Control
IR
Network TCP-IP, WIFI
USB USB Keyboard / Mouse
OTHER
Power Adapter 5 VDC 2.5 A
Weight .45 lbs. (D300 Decoder Only)
Dimensions 6”W X 5”D X 1”H
Working Temp. 32 to 122°F (0 to 50 °C )
Working
Humidity
Up to 85% RH (no condensation)
Storage Temp. -4 to 149 °F (-20 to 65 °C )
Storage
Humidity
Up to 90% RH (no condensation)
WHAT’S IN THE BOX
PART NO. QTY DESCRIPTION
SAVISIGN-P100S 1 WI-FI Enabled Signage Player
PS5VDC2.5A 1 Power Adapter
RMT-P100 1 IR Remote control
1 Quick Start Guide
Page 2
HARDWARE INSTALLATION
1. Connect an HDMI monitor to the HDMI connector on the P100 with an HDMI cable and power on the display.
2. Connect the supplied power adapter to the P100 and plug it in.
3. Optionally connect a USB keyboard and Mouse to the P100.
4. Connect the RJ45 connector on the P100 to your network with a CAT5e/6 cable or connect to the P100 with
WIFI.
5. Power on the P100 by pressing the power button on the front of the unit and wait for the P100 to initialize.
Initial set up using a USB Keyboard & Mouse:
1. Press [CTRL] & [Esc] to display the P100 menu.
2. Press [Esc] or right click the mouse to turn off the on screen keyboard.
3. Use the arrow keys to select “Find local server” and Press [Enter} to execute the selection or use the mouse to
left click on the “Find local server” slider to execute the selection.
4. If the P100 does not find your servers IP address automatically you must manually enter it. For example, if your
server is in a remote location not on your local area network you will need to enter the IP address manually.
See the SaviSign Manager software instructions to continue.
INTRODUCTION
The SaviSign P100 is a digital signage player that
can be remotely accessed and controlled with SaviSign Manager software over WIFI, Ethernet, or
LAN.
The P100 can display pre-made templates and
user created layouts from SaviSign Manager, as
well as various digital media formats. With resolutions up to 4K (3840x2160 @ 30Hz), the SaviSign
P100 is the perfect choice for high quality signage
displays. Connect the P100 to HDTVs, projectors,
digital billboards, video wall installations, and
more!
SmartAVI designed the P100 for maximum flexibility and ease. Access, control, and update the unit
from anywhere in the world via the Internet directly
from your PC with SaviSign Manager. The P100 is
also optionally compatible with USB peripherals
like keyboards, mice, and storage devices. Users
can also control the P100 via Infrared signals with
our packaged IR remote controller.
Initial set up using the IR Remote Control:
1. Press the menu button on the supplied remote
control. Use the arrows on the remote to high-
light “Find local
server” and press
the ok button on the
remote.
2. If the P100 does not
find your servers IP
address automatically you must
manually enter it.
For example, if your
server is in a remote
location not on your
local area network
you will need to enter the IP address
manually.
3. Select and click
“SAVE”.
Loading...