Smart Avi Net-IP-Pro User Manual
ETHERNET/RS232 SERVER
CONTROL MOST SMARTAVI MATRIX
SWITCHES FROM ANYWHERE
IN THE WORLD
USER MANUAL
NET-IP-PRO has been tested with the
Chrome and Firefox web-browsers.
Internet Explorer is not supported.
TABLE OF CONTENTS
Introduction ................................................................... 4
Features ........................................................................ 4
Applications ................................................................... 4
What’s in the box .......................................................... 4
Technical Specifications .............................................. 4
Connecting to the NET-IP-PRO ....................................... 5
Initial Setup for NET-IP-PRO ........................................... 7
Controlling the NET-IP-PRO via HTTP ............................. 9
Matrix Menu .................................................................. 9
Device Config Menu ..................................................... 11
Web Based Telnet......................................................... 12
Controlling the NET-IP-PRO via TELNET ......................... 13
Upgrading the NET-IP-PRO ............................................ 13
Limited Warranty Statement ......................................... 16
© 2013 SmartAVI, Inc.
3
INTRODUCTION
The NET-IP-PRO is an RS-232 control module that allows most
SmartAVI switching matrixes to be controlled remotely via
HTTP or TELNET. Manage the switching functions of your matrix with ease from anywhere in the world. With NET-IP-PRO you
can save present input/output configurations for easy access.
TELNET access provides transparent command control of your
matrix, perfect for use with automated third-party control software.
Note: Telnet access requires telnet or similar. First find the IP address us-
ing the “detect” application, or if you have configured the IP address manu-
ally, telnet the IP address port 23.
FEATURES
Supports HTTP and TELNET control
10/100 Ethernet Interface
Up to 10 user-definable configurations
Password Protected
Up to 5 Users can Control the Matrixes
IP Configuration via TCP/IP and RS-232
Flexible control of several types of matrixes
WHAT’S IN THE BOX?
APPLICATIONS
Server Collocation
Digital Signage
Airports
Dealer Rooms
Control Rooms
Audio/Visual Presentations
Hotels/Resorts
PART NO. QTY DESCRIPTION
NET-IP-PRO 1 NET-IP-PRO Device
PS5VDC2A 1 5VDC2A Power Supply
CCRS232-X 1 Serial male to male cross-over cable
TECHNICAL SPECIFICATIONS
Power External 100-240 VAC/5VDC2A @10W
Dimensions 2.8125”W x 1”H x 3.375”D
Weight 0.5 lbs
Approvals UL, CE, ROHS Compliant
Operating Temp. 32-131°F (0-55 °C)
Storage Temp. -4-185 °F (-20-85 °C)
Humidity Up to 95%
4
© 2013 SmartAVI, Inc.
CONNECTING TO THE NET-IP-PRO
After connecting the NET-IP-PRO to the network and plugging in
the power supply, you will need to find the IP address in order to
connect to it. This can be done with either of the following two dis-
covery tools. The first, called “detect” will open up a small console
application that will display the IP address of the NET-IP-PRO. After obtaining the IP address connect to the device with the web
application of your choice by typing that IP address in the web
browser or connect through telnet on port 23. An alternative op-
tion is to use “detect_gui,” this program will find the IP address of
the NET-IP-PRO and then open up a web browser to the NET-IPPRO web interface. The steps to do this are shown below.
1. Power off all devices.
2.
Using a CAT5 cable, connect the NET-IP-PRO to your local network.
3. If you have a smart-AVI device use your RS-232 male to male
cable to connect the NET-IP-PRO to your smart-AVI device.
4. Plug the power into the NET-IP-PRO.
5. Use one of the discovery tools (mentioned above) to connect
to the NET-IP-PRO web interface or telnet application.
© 2013 SmartAVI, Inc.
5
Loading...