TECHNICAL SPECIFICATIONS
WHAT’S IN THE BOX
VIDEO
Format DVI-D
Resolution Up to 1080p (1920x1080 @60Hz)
TX Input DVI-I (1)
TX Output DVI-D (1)
RX Output DVI-D (1)
Cable Length Up to 40 feet
USB
TX Input USB Type B Female (1)
TX Output USB Type A (2) Keyboard/Mouse
RX Output USB Type A (2) Keyboard/Mouse
AUDIO / MICROPHONE
Audio Format Stereo
TX Input
RX Output
Audio 3.5 mm (1), Microphone 3.5
mm (1)
Audio 3.5 mm (1), Microphone 3.5
mm (1)
NETWORK
TX Output
RX Input
Cable Requirements
Max. Length
RJ45 LAN (1)
RJ45 LAN (1)
CAT 5/5e/6
500 feet
OTHER
PART NO. QTY DESCRIPTION
KLX-500-TX 1 DVI-KVM Extender Transmitter
KLX-500-RX 1 DVI-KVM Extender Receiver
PS5VD2A 2 Power Adapter
Quick Start
Guide
Brackets for mounting this device in a standard 19”
rack can be ordered from SmartAVI.
1 Instructions/Specs
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
20170301
KLX-500
1080p DVI-D Video and
Keyboard, Mouse Extender
Extends HD Video & Keyboard,
Mouse signals up to 500 ft using
CAT 5/5e/6 cables
Power 5VDC2A
Weight TX & RX 1.1 lbs
Dimensions TX &
RX
Operating Temp 41 to 122°F (5 to 50 °C )
Operating Humidity Up to 85% RH (no condensation)
Storage Temp 32 to 149°F (0 to 65 °C )
Storage Humidity Up to 90% RH (no condensation)
8.75”W x 1.5”H x 3.5”D each
Designed and Manufactured in the USA
800.AVI.2131
Tel: (818) 503-6200 | Fax: (818) 503-6208
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
Quick Start Guide
INTRODUCTION
The KLX-500 extender provides 500 feet of connectivity using CAT 5/5e/6 cables used in LAN infrastructure to extend KVM (Keyboard, Video and Mouse) operation of DVI input. Chain additional extenders to
extend signals even further and transmit crystal clear
audio-video signals in real-time. The KLX-500 is an
ideal fit in pre-existing LAN infrastructures, like corporate office environments and data centers. The KLX500 supports full USB emulation and 1080p HD video
up to 1920x1080 resolution at 60Hz. The KLX-500
features dual control operation for local and remote
KVM support, so managing workflow is never more
than a mouse-click away. Built with plug-and- play
functionality, setting up and running KLX-500 is simple and seamless. No drivers or software installations
required. The KLX-500 compresses data to utilize CAT
5/5e/6 cables at no loss to performance or picture
quality. For the best visual and control results when
going the distance, KLX-500 has your KVM and HD
video needs covered.
FEATURES
Extends KVM operation up to 500 feet via CAT
5/5e/6 cables
Chainable for thousands of feet of extension
Supports full USB emulation for keyboard-mouse
operation
Audio input and output
Dual control operation, for local and remote use
of KVM
Supports 1080p up to 1920x1080 resolution at
60Hz
Plug-and-Play ready
No software or driver required
APPLICATIONS
Digital Signage
Public Presentations
Security and Surveillance
Healthcare Supervision
Educational Spaces
Hotel Displays
Convention Centers
Point of Sale and Retail
Military and Government Systems
CONNECTING THE KLX-500
1. Power off all devices prior to connecting them.
2. Connect the KLX-500-TX transmitter to the computer with a USB Type A to Type B cable.
3. Connect the computers DVI output to the KLX-500-TX DVI input. See Note below if VGA output is required.
4. Optionally connect the computers audio and microphone jacks to the KLX-500-TX.
5. If you want local access you may optionally connect a DVI monitor to the DVI output on the KLX-500-TX and a USB keyboard
and mouse to the KLX-500-TX USB ports marked for keyboard and mouse.
6. Connect a CAT 5/5e/6 cable to the KLX-500-TX.
7. Connect a CAT 5/5e/6 cable to the KLX-500-RX.
8. Connect a DVI monitor to the DVI output on the KLX-500-RX.
9. Connect a USB keyboard and mouse to the KLX-500-RX USB ports marked for keyboard and mouse.
10. Optionally connect speakers and a microphone to the KLX-500-RX.
11. Power on all devices.
12. Press and release the SW button on the KLX500-RX to learn EDID from the connected monitor. The Link LED will go out and
come back on flashing once the EDID is learned.
* NOTE: You can connect a computers VGA output port using a VGA to DVI-I Adapter on the TX DVI input port. The RX DVI output
port is compatible with VGA. The TX DVI output port is not compatible with VGA.
RX FRONT
TX FRONT
RX BACK
TX BACK
Loading...