Smart Avi HFX-TX, HFX-RX User Manual

TECHNICAL SPECIFICATIONS

VIDEO

Format HDMI 1.4 and HDCP Compliant

HDTV Resolutions 480p, 720p, 1080i, 1080p @ 60

Hz/48bit,
4Kx2K @ 30 Hz

Standard TV
Resolution

Refresh Rate Up to 130 Hz

Wavelength 850 nm

Bit Error Rate
Performance

Input Interface
(TX)

Output Interface
(RX)

Input Cable
Length (TX)

Output Cable
Length (RX)

480i

1.00E-12

HDMI Type A19-pin Female TMDS

HDMI Type A19-pin Female TMDS

Up to 40 ft.

Up to 40 ft.

SYSTEM

Interface LC-Type Fiber Optic Cable

Cable
Requirements

Maximum Length 1,000 feet (300 meters)

Laser Output Power Class 1; EN 60825-1

OTHER

Power External 5VDC2A @10W

Dimensions 1.125”H x 5”W x 4.125”D

Weight 1 lb

Approvals UL, CE, ROHS Compliant

Operating Temp. 32-131°F (0-55 °C)

Storage Temp. -4-185 °F (-20-85 °C)

Humidity Up to 95%

Connector

Multimode, OM3

2007; EN 60825-2 A2
2010

HFX

AUDIO

Format Dolby TrueHD, DTS-HD MA

Input Interface HDMI (Integrated)

Output Interface HDMI (Integrated)

Designed and Manufactured in the USA

800.AVI.2131

Tel: [phone] Fax: [phone]

11651 Vanowen St. North Hollywood, CA 91605

SmartAVI.com

4K HDMI Extender over

Fiber Optic Cables

Extend uncompressed HDMI signals up to

1,000 feet over multimode fiber optic

cabling, with resolutions up to 4K Ultra

USER MANUAL

INTRODUCTION

For reliable, uninterrupted and long-distance HDMI
extension, the HFX provides the best solution with its
fiber optic extension capabilities. Users can bridge
large gaps that they ordinarily could not with this
compact device. The HFX includes the transmitter
and receiver, for complete point-to-point signal ex­tension, with no need for any other hardware or soft­ware.

The HFX delivers uncompressed HDMI signals up to
1,000 feet (300 meters). Supported resolutions go
up to 4K Ultra HD (@30Hz), and 3D HD video is also
supported. As with all HDMI connections, high-quality
digital audio is also transmitted via the extender

FEATURES

• Supports HDMI 1.4a

• HDCP Compliant

• Extends HDMI signals up to 1,000 feet at

10.3Gbps with OM3 multimode duplex fiber op­tic cabling

• Supports resolutions up to 4K Ultra HD (@ 30Hz)

• Hot Pluggable

• EMI/RFI Resistant

• LC Type Fiber Optic Connector

• Plug-and-Play

• Quick and Easy Setup

APPLICATION DIAGRAM

APPLICATIONS

• Home Theater

• Corporate/Educational Presentations

• Call Centers

• Industrial (Long-Range Workstation Isolation)

• Information Terminals/Kiosks

• Airport Installations (Air Traffic Control/

Passenger Information)

• Educational Environments with Remote Dis­plays

• Medical Campuses (Remote Operation Away
from Sensitive/Magnetic Equipment)

• Recording Studios

• Financial (Remote Servers/User Control)

CONNECTING THE HFX

1. Power off all devices including the HDMI
source and display.

2. Connect an HDMI cable from the HDMI source
to the HDMI port on the HFX-TX (transmitter).

3. Connect the HFX-TX to the HFX-RX (receiver)
using a multimode duplex fiber optic cable (up
to 1,000 ft.) with LC type connectors on both
ends.

4. Connect an HDMI cable from the HDMI port on
the HFX-RX to the HDMI Display.

5. Power on the HFX transmitter and receiver by
plugging in their power adapters (5VDC2A).

6. Power on the HDMI source and the display.

WHAT’S IN THE BOX?

PART NO. DESCRIPTION

HFX-S HDMI Point to Point Fiber Extender,

Includes:[HFX-TX, HFX-RX, 2 x
(PS5VD2A)]

HFX (TX/RX) Front HFX (TX/RX) REAR