Smart Avi HDX-100 User Manual

TECHNICAL SPECIFICATIONS

HDX-100 Specications

© Copyright 2010 Smart-AVI, All Rights Reserved

Function/Model HDX-100

VIDEO INPUT

Bandwidth 1.65Gps

Connector HDMI Connector x1

HDMI OUTPUT DISPLAY

HDMI Connector x 1

RJ45 Jack x 1

Max. Resolution 1920 x 1200 or

480p/720i/720p/1080i/1080p

Bandwidth 1.65Gps

Notice

Th e informati on containe d in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for any particular purpose.

Smart-AVI will not be liable for errors contained herein or
for incidental or consequential damages in connection
with the furnishing, performance or use of this material.

No par t of th is doc ument may be photocopied,
reproduced or translated into another language with
out prior written consent from Smart-AVI.

User Manual

HDX-100

HDMI Extender over CAT6 STP

Storage
Temperature

Power adaptor PS5VDC1A

Housing Metal

Dimension(mm) 2.75”W x 3.875”L x 1”H

-20˚C~60˚C

2840 N. Naomi Ave.

Burbank, California 91504

Phone: [phone]

Facsimile: [phone]

HDMI Extender

www.smartavi.com

INTRODUCTION

The HDMI signal transmission unit is placed near the HDMI
source. Connect the HDMI source to the transmission unit,
which will extend the signal up to 150 feet over a single
CAT6 STP cable.

HDX-100

Connection Diagram

FEATURES

• Compact Transmitter/Receiver Units

• Local HDMI Output

• Perfect Image Quality at all Resolutions

(1920 x 1200, 480p, 720i, 720p, 1080i, 1080p)

• Video Resolutions up to 1920 x 1200 at 60H

(1280 x 1024 at 75Hz) on all Distances to the
Maximum Limit

• Bandwidth to 1.65Gps

• Unit Operates Regardless of Local Monitor

Connectivity

• Distances up to 150 Feet using CAT6 STP Cabling

• Compatible with all Operating Systems

• Plug-and-Play – No Software Required

WHAT’S IN THE BOX?

Please check the contents of the package before beginning
installation.

150 Feet over CAT6 STP

HDMI Source

HDX-TX100

INSTALLATION AND OPERATION

Connecting the Splitter/Extender:

1. Connect the HDX-100 to the Component/TV/Monitor
with HDMI cable (included with the unit).

2. Connect HDX-TX100 to HDX-RX100 via CAT6 STP.

3. Connect HDX-RX100 to display.

4. Connect the power.

HDX-RX100

Qty Description Part Number

1

1

1 PowerSupply5V1A PS5VD3AUS

HDX Transmitter, HDMI over
CAT6 STP Cable

HDX Receiver, HDMI over
CAT6 STP Cable

HDX-TX100

HDX-RX100