Smart Avi HDR 4X4 User Manual
Technical Specifications
Video
Video Amplifier
Bandwidth
Input Video Signal 1.2 volts
Input DDC Signal 5 volts
Single Link Range 1080p
HDMI Connector HDMI Type A 19 pin female
Control
Power
Power Supply 5VDC-2A
Physical
Dimensions 12”W x 1.75”H x 7”D
Weight 4.05 lbs.
1.65 gBPS
2 front panel buttons
© Copyright 2008 Smart-AVI, All Rights Reserved
Notice
The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties
of merchantability and fitness for any particular
purpose.
Smart-AVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.
No part of this document may be photocopied,
reproduced or translated into another language
without prior written consent from Smart-AVI.
User Manual
For the complete manual, visit www.smartavi.com.
2840 N Naomi Ave.
Burbank, California 91504
Phone: (818) 565-0011
Facsimile: (818) 565-0020
HDMI Router 4x4
Display content from any four computers
on any four screens independently.
www.smartavi.com
Introduction
Our non-blocking matrix switch provides an
easy and dynamic approach to creating multiple
computer stations, each having the ability of
accessing any one of the CPU’s or displays instantly.
The SmartAVI HDMI 4x4 router provides singlelink HDMI operation at the maximum TMDS rate
of 2 x 1.65 Gb/sec. at resolutions up to 1080p and
1920x1200. The HDMI signals can be transmitted
through 50 feet of copper at the maximum TMDS
rate on both the input and output sides of the
switch.
Features
Increases your productivity by providing •
you with access to four computers from four
workstations.
4x4 non-blocking, single-link HDMI matrix •
switch.
Supports HDMI operation at the maximum TMDS •
rate of 2 x 1.65 Gb/s.
Supports resolutions up to 1080p, 2K, and 1920 •
x 1200.
Simultaneous 4x4 analog matrix switching at 380 •
MHz bandwidth.
HDMI transmission over 50 feet at the highest •
TMDS rate of 1.65 Gb/s.
Control from front panel.•
Installation Diagram
What’s in the box?
Description Qty Part Number
4x4 HDMI Matrix 1 HDMI4X4
5VDC 2A Power
Supply
HDMI Cable
1
Optional
1 CCHDMIMM06
PS-5V1A-US
HDMI 4x4 Router Installation Diagram
Connecting The HDMI Router
Connect the HDMI male extension cable between 1.
the PC’s and the ‘video in’ port of the HDMI router.
Connect the HDMI cables between the monitors 2.
and the “HDMI out” ports of router.
Connect the power cord and turn on the router.3.
Turn on the PC’s and monitors.4.
[ In 1 ] [ In 2 ] [ In 3 ] [ In 4 ]
HDMI Router
Back
[ Out 1 ] [ Out 2 ] [ Out 3 ] [ Out 4 ]
Source
[ 1 ]
[ 2 ] [ 3 ] [ 4 ]
Front
IR
DC-IN 5V
Made in USA
SmartAVI
www.smartavi.com
Input
Output
Select
Select
HDMI4X4
Loading...