Smart Avi DVS2P User Manual

Technical Specifications

Input/Output Signal

PIN 1

PIN 17

#niPlangiS#niPlangiS

1-2ataDS.D.M.T61tceteDgulPtoH
2+2ataDS.D.M.T71-0ataDS.D.M.T
3dleihS4/2ataDS.D.M.T81+0ataDS.D.M.T
4-4ataDS.D.M.T91dle
5+4ataDS.D.M.T02-5ataDS.D.M.T
6kcolCCDD12+5ataDS.D.M.T
7ataDCDD22dleihSkcolCS.D.M.T
8cnyS.treVgol

anA32+kcolCS.D.M.T

9-1ataDS.D.M.T42-kcolCS.D.M.T

01+1ataDS.D.M.T
11dleihS3/1ataDS.D.M.T1CdeRgolanA
21-3ataDS.D.M.T2Cn
31+3ataDS.D.M.T3CeulBgolanA
41rewoPV5+4CcnySzroHgolanA
51DNG5CdnuorGgolanA

PIN 8

PIN 24

eerGgolanA

C 1
C 2

C 4

C 3

C 5

© Copyright 2006 Smart-AVI, All Rights Reserved

Notice

3MART!UDIO6IDEO)NTEGRATION

3MART!UDIO6IDEO)NTEGRATION

The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular
purpose.

User Manual

Smart-AVI will not be liable for errors contained herein
or for incidental or consequential damages in
connection with the furnishing, performance or use
of this material.

No part of this document may be photocopied,
reproduced or translated into another language with
out prior written consent from Smart-AVI.

DVS2P

ihS5/0ataDS.D.M.T

Specifications

Video Input 1 DVI Female
Video Output 4 DVI Female
Max. Resolution 1920 x 1200 60 @ Hz
Cable Distance to Monitor 10 m (max)
Signal Type Standard DVI Signal
Power Adapter (min) DC 7.5V 1.5A
Housing Metal
Weight 475 g

Dimensions (LxWxH) mm 153x75x42

2840 N. Naomi Ave.

Burbank, California 91504

Phone: [phone]

Facsimile: [phone]

The DVS2P splitter allows you to use a

single PC/DVD player to display

identical images on multiple monitors.

www.smartavi.com

Introduction

The DVS2P splitter allows you to use a single PC to

display identical images on multiple monitors.

DVI Splitter is ideal for:

 Test bench facilities
 Data Center
 Help Desks

Features

 Use PanelLink digital technology
 Supports high-resolution dislplay up to UXGA

(25-165MHz)

 Can be cascaded
 Compliant with the specification of DVI 1.0

Package Contents

 1 Smart-AVI DVS2P DVI Splitter
 1 User Manual
 1 Power Adapter DC 7.5V 1.5A

Installation Diagram

HDMI Widescreen TV HDMI Widescreen TV

DVS2P

PC

Installation

1. Turn off computer and monitor.

2. Connect DVI male extension cable between the

PC and the “video in” port of splitter.

3. Connect the DVI male/female extension cables

between the monitors and the “DVI out” ports of
splitter.

4. Connect the power cord and turn on the splitter.

5. Turn on PC and monitors.

Optional DDC Pass-Through

If you would like the computer to read EDID
information directly from your monitor instead of
the internal EEPROM in the DVS2P, perform the
following steps.

1. Turn off computer and monitor.

2. Disconnect power adapters.

3. Remove screws on the sides of the transmitter.

4. Lift the top off of the chassis

5. Locate headers labeled J13 and J12.

Operation for Cascade

1. The function to display identical images on more

monitors, is an attachment of another splitter.

2. Connect the DVI male/female extendion cable

between the former splitter of the “DVI out 1”
port and the latter splitter of the “video in” port.

Note:Note:

Note:

Note:Note:
Even though you are allowed to cascade the splitter
with varied ports, the image might become unstable if
you cascade too many tiers of splitters.

J13 J12

6. Reconfigure the jumpers as shown.

7. Replace chassis top and screws.