Smart Avi DVS-200 User Manual

Introduction

The DVS200 extends the distance between any
computer supporting single-link DVI-D and a
monitor or projector with a compatible DVI input.

Features

 Supports Mac and PC DVI-D
 Resolutions up to 1920 x 1080
 No degradation of video quality
 LEDs indicate power and loss of clock signal
 External power supplies
 Silent fanless operation
 Perfect Image Quality at all Resolutions.
 Automatic EDID learning for the support

of any DVI monitor.

© Copyright 2007 Smart-AVI, All Rights Reserved

Notice

The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular
purpose.

Smart-AVI will not be liable for errors contained herein
or for incidental or consequential damages in
connection with the furnishing, performance or use
of this material.

No part of this document may be photocopied,
reproduced or translated into another language with
out prior written consent from Smart-AVI.

3MART!UDIO6IDEO)NTEGRATION

3MART!UDIO6IDEO)NTEGRATION

User Manual

Applications

 Call Centers (co-locate user’s computers).
 Industrial (protection against pollution).
 Information Terminals & Kiosks.
 Airports (air traffic control, passenger

information systems).

Front and Rear View

DVI In

Local

DVI Out

Port 2 Port 1

5VDC

Status

LED

2840 N. Naomi Ave.

Burbank, California 91504

Phone: [phone]

Facsimile: [phone]

DVS200

The DVS200 extends and splits any

single-link DVI-D signal 2 ways up to

220 feet using CAT 6 shielded cables.

(Includes automatic DDC Learning)

www.smartavi.com

PIN 17

PIN 1

PIN 24

PIN 8

C 4

C 1
C 2

C 5

C 3

Installation Diagram

PC or MAC

Technical Specifications

Input/Output Signal

Plasma TV

Local Monitor

DVI-D

5V

DVI-D

Installation

1. Turn off computer and monitor.

2. Connect DVI male to male cable between the
computer and the transmitter.

3. Connect monitor or projector to the local loopback
DVI port on the transmitter.

4. Turn on the monitor.

5. Plug in one of the power transformers and
connect it to the transmitter.

6. Remove the monitor from the local loopback
DVI port on the transmitter and connect it
to the DVI port on the receiver.

7. Connect a shielded CAT6 cable between port 1
on the transmitter and port 1 on the receiver.

8. Plug in the other power transformer and connect
it to the receiver.

9. Turn on the computer.

DVS200
Transmitter

CAT6-STP

Plasma TV

DVXRX200
Reciever

5V

CAT6-STP

EDID Learning Explained

The Display Data Channel (DDC) is a digital connection
between a computer display and a graphics adapter
that allows the display to communicate its specifications
to the adapter.

The Extended Display Identification Data (EDID) is a
data structure provided by a computer display over the
DDC to describe its capabilities to a graphics card.

The DVS200 does not continue the DDC across the
CAT6 links and contains its own EDID at the video
source input. Therefore, the EDID on the DVS200 is
used in place of the actual monitor’s EDID. In order for
the computer to output at the correct resolutions and
refresh rates for a specific monitor, the DVS200 must be
loaded with the monitor’s EDID.

On power-up the DVS200 reads and stores the EDID
of the DVI monitor connected to the local loopback
port. If the local loopback port is disconnected during

power-up, the stored EDID will not be modified.

DVXRX200
Reciever

5V

#niPlangiS#niPlangiS

1-2ataDS.D.M.T61tceteDgulPtoH
2+2ataDS.D.M.T71-0ataDS.D.M.T
3dleihS4/2ataDS.D.M.T81+0ataDS.D.M.T
4-4ataDS.D.M.T91dle
5+4ataDS.D.M.T02-5ataDS.D.M.T
6kcolCCDD12+5ataDS.D.M.T
7ataDCDD22dleihSkcolCS.D.M.T

anA32+kcolCS.D.M.T

8cnyS.treVgol
9-1ataDS.D.M.T42-kcolCS.D.M.T

01+1ataDS.D.M.T
11dleihS3/1ataDS.D.M.T1CdeRgolanA
21-3ataDS.D.M.T2Cn
31+3ataDS.D.M.T3CeulBgolanA
41rewoPV5+4CcnySzroHgolanA
51DNG5CdnuorGgolanA

eerGgolanA

Resolutions

Supported by the internal EDID configuration

Resolution Refresh Rate

640 x 480 85 Hz
800 x 600 85 Hz
1024 x 768 85 Hz
1152 x 870 75 Hz
1280 x 768 75 Hz
1280 x 960 60 Hz
1280 x 1024 60 Hz
1600 x 1200 60 Hz
1920 x 1080 60 Hz

Prepairing System CAT6 CablePrepairing System CAT6 Cable

Prepairing System CAT6 Cable

Prepairing System CAT6 CablePrepairing System CAT6 Cable

Pair 1 Pins 1 & 2
Pair 2 Pins 3 & 6
Pair 3 Pins 4 & 5
Pair 4 Pins 7 & 8

Connectors: RJ-45
Capacitance: 14 pf/ft (46.2 pf/m)
Conductor Gauge: 24 AWG
Impedance: 100 +/- 15 ohms

4 - Pair, (stranded) Foil Shielded

ihS5/0ataDS.D.M.T