Smart Avi AR-100 User Manual
Technical Specifications
3MART!UDIO6IDEO)NTEGRATION
3MART!UDIO6IDEO)NTEGRATION
© Copyright 2007 Smart-AVI, All Rights Reserved
232SR)elaM9BD-XR()elameF9BD-XT(
locotorP
oiduA
5taCtf0033otpu,5taCPTU
rewoPCDV5
snoisnemiD”52
thgieWsbl02.0
SNOITACIFICEPS001RASNOITACIFICEPS001RA
SNOITACIFICEPS001RASNOITACIFICEPS001RA
SNOITACIFICEPS001RA
duabllaottnerapsnart,xelpudlluF
etar
oiduAoeretSepyTlangiS
Bd0,zHM51htdiwdnaB
mhO001ecnadepmI
elameF,kcajinimmm5.3rotcennoC
8.)H(x”57.2)W(x”5.3)L(
Notice
The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular
purpose.
Smart-AVI will not be liable for errors contained herein
or for incidental or consequential damages in
connection with the furnishing, performance or use
of this material.
No part of this document may be photocopied,
reproduced or translated into another language with
out prior written consent from Smart-AVI.
For the complete manual, visit www.smartavi.com.
User Manual
AR100
3111 Winona Ave., Suite 101
Burbank, California 91504
Phone: (818) 565-0011
Facsimile: (818) 565-0020
Extend any RS232 and stereo device up
to 3000ft using a single Cat5 cable.
www.smartavi.com
Introduction
The AR100 RS232 - Sound Cat5 extender allows
you to extend any full Duplex RS232 with any
Stereo sound up to 3000ft using a single
unshielded Cat5 cable.
Installation Diagram
Sound Source
Speaker
Amplifier
Features
Unbalanced stereo line level analogue audio to
be transmitted via UTP Cat5 Hi-fidelity audio
frequency response.
Extend any touch screen up to 3000ft.
Extend any sound system up 3000ft.
Supports all protocol and baud rates.
Uses easy to install inexpensive CAT5.
Output reaches up to 3000 feet.
Compatible with line level stereo audio signals.
High ground loop immunity.
Built-in lightning, power surge and transient
protection.
Remote units come with buffered outputs.
Compact enclosure.
Optional power supply for remote unit.
Fully transparent path for all protocols and data
transfers.
ApplicationsApplications
Applications
ApplicationsApplications
Hotel
Cable TV remote control
Control rooms
Remote On-Digital set-top control
Sky box control extension and switcher output
Dealer rooms
Point of Sale
Remote VCR control
CAT5 Cable
5V 5V
Server Dump Terminal
Connecting The TransmitterConnecting The Transmitter
Connecting The Transmitter
Connecting The TransmitterConnecting The Transmitter
1. Connect an RS232 cable and/or audio cable to the
souce unit.
2. Connect power supply to the unit. Observe LED
lighting up indicating power present
AR TX100
AR TX100
5V 5V
CAT5 Cable
AR RX100
Speaker
AR RX100
Preparing & Connecting System CAT5 CablePreparing & Connecting System CAT5 Cable
Preparing & Connecting System CAT5 Cable
Preparing & Connecting System CAT5 CablePreparing & Connecting System CAT5 Cable
Following is the wiring standard for terminating CAT 5
cable using RJ-45 connector:
Pair 1 Pins 1 & 2
Pair 2 Pins 3 & 6
Pair 3 Pins 4 & 5
Pair 4 Pins 7 & 8
What’s in the box?
ytQytQ
ytQytQsmetIsmetI
ytQ
1tinurettimsnarT001RA001XT-RA
1tinurev
2ylppusrewopcdtlov5SU-A1D5-SP
ieceR001RA001XR-RA
smetIsmetI.oNtraP.oNtraP
smetI
Connecting The ReceiverConnecting The Receiver
Connecting The Receiver
Connecting The ReceiverConnecting The Receiver
tnetnoCegakcaP001RAtnetnoCegakcaP001RA
tnetnoCegakcaP001RAtnetnoCegakcaP001RA
tnetnoCegakcaP001RA
.oNtraP.oNtraP
.oNtraP
1. Connect an RS232 cable and/or audio cable to the
reveiver unit.
2. Observe LED lighting up indicating power present
Connectors:Connectors:
Connectors: RJ-45
Connectors:Connectors:
Capacitance:Capacitance:
Capacitance: 14 pf/ft (46.2 pf/m)
Capacitance:Capacitance:
Conductor Gauge:Conductor Gauge:
Conductor Gauge: 24 AWG
Conductor Gauge:Conductor Gauge:
Impedance:Impedance:
Impedance: 100 +/- 15 ohms
Impedance:Impedance:
4 - Pair
Loading...