Smartab ST1009X User Manual

4.4 (7)
Smartab ST1009X User Manual

ST1009x

Factory Data Reset

Please note: this will erase all data on the tablet including the password settings, any saved apps, photos, videos and any other saved information. Once finished, the tablet will be restored to factory default settings including all factory preinstalled apps. Any apps you have purchased and/or downloaded to the tablet will need to be reinstalled manually when finished.

IMPORTANT: Make sure you have charged the tablet for at least one hour before performing this reset.

NOTE: Some screenshots below may differ slightly depending on which model tablet you are using. The choice selection will be the same.

1.Make sure the tablet is powered OFF. You can double check this by quick-pressing the power button to see if the tablet is still powered on.

2.Press and HOLD the [POWER] and [Vol -] buttons together for five full seconds then release both at the same time. Wait for the Android system recovery screen to show:

Android system recovery screen

3.Use the [Vol -] button to scroll through the selections. Scroll to option "wipe data/factory reset" then press the [POWER] button to confirm the selection. Wait for the Confirm wipe screen to show:

Loading...
+ 2 hidden pages