Smart Passion 2012, Pure 2012 Owner's Manual

Page 1
>> Operator’s Manual.
smart fortwo coupé and smart fortwo cabriolet
Page 2
Symbols
Trademarks®:
R
Bluetooth® is a registered trademark of Bluetooth SIG Inc.
R
ESP® is a registered trademark of Daimler.
R
is a registered trademark of Apple
iPod® Inc., registered in the U.S.A. and other countries.
The following symbols are found in this Operator’s Manual:
* Optional equipment is identified with
an asterisk. Since standard equipment varies between models, the descriptions and illustrations in this Operator’s Manual may differ slightly from the actual equipment of your vehicle.
WARNING
G
Warning notices draw your attention to hazards that may endanger your health or life, or the health or life of others.
!
Highlights hazards that may result in
damage to your vehicle.
i
Helpful hints or further information
you may find useful.
X
This symbol points to instructions for you to follow.
X
A number of these symbols appearing in succession indicates a multiple-step procedure.
Y page
This symbol tells you where you can find additional information on a topic within this Operator’s Manual.
Y Y
This continuation symbol marks a warning or procedure which is continued on the next page.
Display
Text in displays, such as the control system displays, are printed in the type shown here.
Page 3
Let the fun begin!
a moment to familiarize yourself with
Take your smart fortwo coupé or smart fortwo cabriolet and read through the Operator’s Manual before driving. This will ensure you get more fun out of your vehicle - and avoid danger to yourself and others.
This Operator’s Manual contains very important information about how to safely and effectively operate the vehicle. It is important to note that this is a unique vehicle. It is obviously smaller than most vehicles on the road and, for this reason, it can provide both unique experiences and special responsibilities. It is extremely important that you read this entire Manual and that you familiarize yourself with how the vehicle works. Some of the features may be different from the features on other compact passenger vehicles. Should you have any questions about the vehicle and how to safely operate its features, please use common sense and contact smart dealer representatives, who are available to help you.
smart is a vehicle manufactured by Daimler, distributed in the United States by smart USA Distributor LLC., and in Canada by Mercedes-Benz Canada, and sold and serviced by independent, authorized smart centers.
Because of this vehicle’s unique characteristics, we strongly recommend that you service and maintain the vehicle only at authorized smart service facilities. A list of service facilities is available by calling smart Customer Assistance representatives at: 1‑800‑762‑7887 (in the USA) 1‑877‑627‑8004 (in Canada)
Although we cannot prevent you from servicing the vehicle at facilities other than smart authorized facilities, this is not advisable.
Optional extras are identified with an asterisk*. The equipment in your vehicle may vary depending on the model, version
and availability. smart is constantly bringing its vehicles up to the very latest state of the art and reserves the right to modify them in form, equipment and engineering.
Should
you find that a particular feature in this manual is important to your decision to purchase the vehicle, we recommend that you personally check the vehicle to ensure that this feature has been installed before buying the vehicle.
The Operator’s Manual, Quick Guide and Scheduled Maintenance Guide/Warranty Booklet (USA only) or Service/Warranty Booklet (Canada only) belong to the vehicle. You should always keep these documents in the vehicle and make sure you pass them on to the next owner if and when you sell your smart.
Please contact an authorized smart center if you have any further questions.
The Technical Documentation team at Daimler wishes you many happy hours at the wheel.
4515846882
É4515846882OËÍ
Page 4
Page 5
Contents
3
Index ............................................ 4
Introduction ................................. 13
At a glance .................................... 19
Safety .......................................... 29
Controls ....................................... 51
Operation .................................... 115
Practical hints ............................. 157
Technical data ............................. 211
Page 6
Index
4
A
ABS (Antilock Brake System) ............. 46
Indicator lamp ........................ 163
Accessory weight .......................... 139
Accidents
Air bags .................................. 33
Additives
Engine oil .............................. 221
Gasoline ................................ 222
Address change .............................. 15
Air bags ....................................... 33
Children ..................................
Front, driver and passenger ......... 36
Front, passenger ....................... 36
Head-thorax ............................. 37
Knee bag .................................. 37
Passenger front air bag off
indicator lamp ..................... 28, 41
Safety guidelines ...................... 35
SRS indicator lamp ................... 166
Thorax-pelvis .......................... 38
Window curtain ......................... 38
Air conditioning
see HVAC ................................ 102
Air conditioning refrigerant .......... 221
Air pressure
see Tire inflation pressure
Air pressure (tires) ....................... 140
Air vents ..................................... 104
Alarm system
see Anti-theft systems
Ambient lighting ........................... 70
Anticorrosion/antifreeze ............... 223
Antiglare, Interior rear view
mirror ......................................... 62
Antilock Brake System
see ABS
Anti-theft systems ......................... 48
Anti-theft warning system ........... 48
Electronic immobilizer .............. 48
Interior motion sensor ............... 49
Tow-away alarm ......................... 49
Aquaplaning
see Hydroplaning
Armrest ........................................ 59
Aspect ratio (tires) ....................... 140
33
Audio system ................................. 98
Basic ...................................... 99
Navigation/multimedia .............. 99
Automatic headlamp mode ................ 65
Automatic locking .......................... 53
Automatic transmission .................. 82
Display message .......................
Driving tips ............................. 84
Emergency operation (limp-
home mode) ............................... 86
Gear selector lever .................... 82
Gear selector lever positions ...... 83
Gearshift pattern ...................... 82
Hill-start assist system .............. 84
Manual gearshifting .................. 84
Shifting procedure .................... 83
Auxiliary instruments
Cockpit clock ........................... 92
Tachometer .............................. 92
AUX socket .................................... 99
159
B
Backrest
see Seats
Backup lamp ................................. 180
Bar (air pressure unit) ................... 140
Battery
Charging ................................ 196
Indicator lamp ........................ 168
Jump starting .......................... 199
Removing and installing ............ 196
Battery (key)
Replacing the transmitter
battery ................................... 177
Bead (tire) .................................. 140
Brake fluid .................................. 123
Checking ................................ 123
Brake lamp .................................. 180
Brake pedal ................................... 81
Brakes ........................................ 144
Parking brake ........................... 80
Warning lamp .......................... 164
Break-in period ........................... 116
Bulbs
Front ..................................... 179
Rear ...................................... 180
Replacing ............................... 178
Page 7
Index
5
C
CAC (Customer Assistance Center) ...... 16
California retail buyers and
lessees, important notice for ........... 14
Can holder
see Cup holder
Cargo compartment cover blind ........ 107
Catalytic converter ....................... 146
CD player ..................................... 98
Center console ............................... 27
Central locking
Automatic ................................ 53
Locking/unlocking from inside .... 54
Certification label ....................... 214
Children in the vehicle ................... 42
Air bags .................................. 33
Indicator lamp, passenger front
air bag off .......................... 41, 173
Infant and child restraint
systems ................................... 43
OCS (Occupant Classification
System) ................................... 39
Safety notes ............................. 42
Tether anchorage points ............. 44
Child safety
see Children in the vehicle
Cigarette lighter .......................... 114
Climate control
see HVAC ................................ 102
Clock ........................................... 88
Cockpit ........................................ 21
Coin holder ................................. 110
Cold tire inflation pressure ........... 140
Combination switch ........................ 67
Control system
Consumption menu ..................... 95
Control lever ............................ 93
Introduction ............................ 93
Menus and submenus ................... 94
Messages menu .......................... 96
Multifunction display ................ 93
Odometer menu .......................... 94
Reset menu ............................... 95
Settings menu ........................... 96
Start menu ............................... 95
Time menu ................................ 97
Coolant
Anticorrosion/antifreeze .......... 223
Capacities .............................
Checking level ......................... 122
Temperature warning lamp ......... 170
Coolant temperature ...................... 150
Cruise control ............................. 100
Cup holder ................................... 107
Curb weight ................................. 140
Customer Assistance Center (CAC) ...... 16
220
D
Dashboard
see Instrument cluster
Data recording ............................... 17
Daytime running lamp mode .............. 66
Deep water
see Standing water
Defroster
Rear window ............................ 106
Windshield ............................. 106
Department of Transportation
see DOT
Dimensions (vehicle)
see Vehicle specification
Direction of rotation (tires) ........... 133
Display messages
Automatic transmission ............. 159
Electronic immobilizer ............. 159
Door control panel ......................... 28
Door handles ................................. 28
Doors
Locking/unlocking from outside ... 53
Opening from inside .................. 54
DOT (Department of
Transportation) ...................... 138, 140
Drinking and driving ..................... 143
Driving
Abroad ................................... 150
Coolant temperature ................. 150
Hydroplaning .......................... 147
Instructions ....................... 78, 143
In winter ................................ 148
Safety systems .......................... 46
Through standing water ............. 148
Tips, automatic transmission ...... 84
Page 8
Index
6
Driving and parking
Safety notes ..............................
Driving safety systems .................... 46
ABS ........................................ 46
ESP® ....................................... 47
Hydraulic brake assistant ........... 48
78
E
Electrical system
Improper work on or
modifications ........................... 15
Power outlet ............................ 114
Electronic immobilizer .................. 48
Display message .......................
Electronic Power Steering
see EPS
Electronic Stability Program
see ESP®
Emergency, in case of
Hazard warning flasher .......... 48, 69
Roadside Assistance .................. 14
Emergency operation (limp-home
mode) .......................................... 86
Emergency Tensioning Device
see ETD
Emission control .......................... 149
Information label ..................... 213
System warranties ...................... 13
Engine
Break-in recommendations ......... 116
Compartment ............................ 117
Compartment cover .................... 117
Electronics ............................. 212
Malfunction indicator lamp ........ 171
Number .................................. 215
Starting .................................. 78
Turning off .............................. 82
Engine coolant
see Coolant
Engine oil
Adding ................................... 119
Additives ............................... 221
Checking level ......................... 118
Consumption ............................ 118
Oil dipstick ............................ 119
EPS (Electronic Power Steering)
Warning lamp ........................... 167
159
ESP® (Electronic Stability Program) ... 47
Warning lamp ...........................
ETD (Emergency Tensioning Device) ... 33
Safety guidelines ...................... 35
Exterior lamp switch ...................... 64
Exterior lighting
Overview ................................ 179
Exterior rear view mirrors .............. 61
Exterior view of vehicle .................. 20
167
F
First-aid kit ............................... 158
Flat tire ..................................... 186
Fluids
Capacities .............................
Engine coolant ........................ 220
Engine oil .............................. 220
Fog lamps ................................ 68, 179
Front air bags
see Air bags
Front compartment ........................ 120
Front lamps
Overview ................................ 179
Fuel ........................................... 145
Additives ............................... 222
Capacity, fuel tank ................... 220
Fuel filler flap and cap ............. 116
Fuel level display ..................... 90
Premium unleaded
gasoline ..................... 117, 220, 221
Refueling ............................... 116
Requirements .......................... 222
Fuel cap
Indicator lamp ......................... 170
Fuel filler flap ............................. 116
Fuel level display .......................... 90
Fuel tank
Capacity ................................ 220
Fuel filler flap and cap ............. 116
Refueling ............................... 116
Fuse chart ................................... 208
Fuses ......................................... 205
220
Page 9
Index
7
G
Gasoline
see Fuel
GAWR (Gross Axle Weight Rating) ...... 140
Gear selector lever ........................ 82
Transmission positions .............. 83
Global locking/unlocking ................ 53
Glove box .................................... 110
Gross Axle Weight Rating
see GAWR
Gross Vehicle Weight
see GVW
Gross Vehicle Weight Rating
see GVWR
GVW (Gross Vehicle Weight) ............. 140
GVWR (Gross Vehicle Weight Rating) .. 140
H
Halogen headlamps
see Headlamps
Hazard warning flasher ................... 69
Headlamps
Automatic headlamp mode ............ 65
Daytime running lamp mode ......... 66
High-beam flasher ..................... 67
High-beam headlamps ................. 67
LED daytime running lamps
(Canada only) ............................ 67
LED daytime running lamps (USA
only) ....................................... 67
Low-beam headlamps .................. 65
Switch ..................................... 64
Head-thorax air bags ...................... 37
Heated exterior rear view mirrors ..... 62
Heated seats .................................. 60
Heating
see HVAC ................................ 102
Height adjustment
Seats ...................................... 59
High-beam flasher .......................... 67
High-beam headlamps ................ 67, 179
Indicator lamp ........................ 169
High-mounted brake lamp ............... 180
Hill-start assist system .................. 84
HVAC (Heating, Ventilation, Air
Conditioning) .............................. 102
Air distribution ...................... 105
Air recirculation ..................... 107
Air vents ................................ 104
Air volume .............................. 106
Defrosting .............................. 106
Rear window defroster ............... 106
Temperature ............................
Hydraulic brake assistant ................ 48
Hydroplaning ............................... 147
104
I
Identification labels .................... 213
Identification number, vehicle
(VIN) .......................................... 214
Infant and child restraint systems
see Children in the vehicle
Inflation pressure
see Tires, Inflation pressure
Inside door handle ......................... 54
Instrument cluster ..................... 22, 24
Illumination ............................ 92
Lamps, indicator and warning ..... 162
Instrument panel
see Instrument cluster
Instruments and controls
see Cockpit
Interior motion sensor .................... 49
Interior rear view mirror ................ 62
Interior storage spaces
see Storage compartments
Intermittent wiping
Rear window wiper ..................... 72
Windshield wipers ..................... 71
J
Jump-starting .............................. 199
K
Key ............................................. 52
Loss of ................................... 174
Replacing the transmitter
battery ................................... 177
Kilopascal (air pressure unit) ......... 140
Page 10
Index
8
Knee bag .......................................
L
Labels ........................................ 213
Emission control information ..... 213
Lamps, exterior
Exterior lamp switch
Switching on/off ....................... 64
Lamps, indicator and warning
ABS ....................................... 163
Battery ................................... 168
Brakes ................................... 164
Coolant temperature ................. 170
Engine malfunction ................... 171
EPS ........................................ 167
ESP® ...................................... 167
Fog lamps ................................ 68
Fuel cap ................................. 170
High-beam headlamps ............... 169
Low-beam headlamps ................. 169
Low tire pressure/TPMS
malfunction telltale ................. 172
Oil pressure ............................ 171
Overview (kilometers) ................ 25
Overview (miles) ....................... 23
Passenger front air bag off .... 36, 173
Seat belt telltale ..................... 165
SRS ........................................ 166
Turn signals ............................ 169
LED daytime running lamps
Canada .................................... 67
USA ......................................... 67
License plate lamps ....................... 180
Lighter
see Cigarette lighter
Lighting ...................................... 64
Coming home function ................ 68
Daytime running lamp mode ......... 66
Exterior .................................. 64
Interior .................................. 69
LED daytime running lamps
(Canada only) ............................ 67
LED daytime running lamps (USA
only) ....................................... 67
Loading
see Vehicle loading
.................. 64
Locking the vehicle ........................ 52
37
Manually .................................
Loss of
Key ........................................ 174
Service and Warranty
Information booklet .................. 212
Low-beam headlamps ................. 65, 179
Exterior lamp switch .................. 64
Indicator lamp ........................ 169
Switching on ............................ 65
M
Main odometer display .................... 87
Maintenance ..................................
Service interval display ............. 91
Malfunction
Electronic immobilizer ............. 159
Shifting system ....................... 159
Manual headlamp mode (Low-beam
headlamps) ................................... 65
Maximum loaded vehicle weight ....... 140
Maximum load rating (tires) ............ 140
Maximum permissible tire
inflation pressure ........................ 140
Mirrors
Exterior rear view mirrors .......... 61
Interior rear view mirror ........... 62
MON (Motor Octane Number) ............. 222
Motor Octane Number
see MON
Multifunction display ..................... 86
N
Normal occupant weight .................. 141
Number, vehicle identification
(VIN) .......................................... 214
O
Occupant Classification System
see OCS (Occupant Classification System)
Occupant distribution ................... 141
Occupant safety
Air bags .................................. 33
Children and air bags ................ 33
176
14
Page 11
Index
9
Children in the vehicle .............. 42
Infant and child restraint
systems ................................... 43
Introduction ............................ 30
OCS (Occupant Classification
System) ................................... 39
Passenger front air bag off
indicator lamp ......................... 39
Seat belts ............................ 31, 35
SRS indicator lamp, malfunction .
OCS (Occupant Classification
System) ........................................ 39
Self-test ................................. 42
Oil
see Engine oil
Oil level
see Engine oil, Checking level
On-board Diagnostics Socket (OBD) ... 213
Operating safety ............................ 15
Outside temperature display ............ 89
Overhead control panel ................... 28
166
P
Paintwork care ............................. 154
Panic alarm .................................. 45
Parcel nets ............................. 107, 111
Parking ........................................
Parking brake ............................... 80
Parking lamps .............................. 179
Parts service ............................... 212
PASS AIR BAG OFF indicator lamp
see Passenger front air bag off indicator lamp
Passenger front air bag ................... 36
Passenger front air bag off
indicator lamp .................... 28, 36, 173
Passenger safety
see Occupant safety
Passenger seat ............................... 60
Pedals ........................................ 143
Power assistance .......................... 143
Power outlet ................................. 114
Power washer ............................... 153
Practical hints
Battery .................................. 196
Display messages ..................... 158
80
Flat tire ................................. 186
Fuses ..................................... 205
Jump starting .......................... 199
Replacing bulbs ....................... 178
Replacing transmitter battery
Replacing wiper blades ............. 184
Towing ................................... 202
Unlocking/locking manually ....... 176
Warning and indicator
lamps ............................... 162, 173
What to do if ............................ 162
Where will I find...? ................. 158
Premium unleaded gasoline ............ 222
Problems with your vehicle .............. 16
Product information ....................... 13
Production options weight .............. 141
PSI (air pressure unit) ................... 141
.... 177
R
Radio .......................................... 98
Radio transmitters ........................ 149
Rain-light sensor ...........................
Rear lamps
Overview ................................ 180
Rear window defroster ................... 106
Rear window wiper/washer ............... 72
Replacing wiper blade .............. 184
Recommended tire inflation
pressure ................................ 125, 141
Refrigerant, air conditioning ......... 221
Refueling .................................... 116
Remote control
see Key
Replacing bulbs ............................ 178
Reporting safety defects .................. 16
Research Octane Number
see RON
Reserve fuel indicator .................... 91
Restraint systems
see Occupant safety
Rims ..................................... 141, 217
Roadside Assistance ....................... 14
RON (Research Octane Number) ......... 222
Roof
see Soft top system
71
Page 12
10
Index
S
Safety
Driving safety systems
Occupant safety ......................... 30
Reporting defects ...................... 16
Safety belts
see Seat belts
Seat belt force limiter .................... 33
Seat belts ..................................... 31
Children in the vehicle .............. 42
Fastening ................................ 62
Proper use of ............................ 31
Safety guidelines ...................... 35
Safety notes .............................. 31
Telltale ................................. 165
Seating capacity ........................... 131
Seats ........................................... 58
Adjustment ............................... 59
Armrest ................................... 59
Heating ................................... 60
Passenger seat .......................... 60
Self-test
OCS (Occupant Classification
System) ................................... 42
SRS ......................................... 30
Service
see Maintenance
Service, parts .............................. 212
Service and warranty
Booklet .................................. 212
Service flap ................................ 120
Service interval display .................. 91
Service life (tires) ....................... 133
Side marker lamps ......................... 179
Sidewall (tires) ............................ 141
Side windows
Operation ................................ 77
Signs and labels ........................... 213
smart surround sound system ........... 100
Snow chains ................................. 142
Snow tires
see Winter tires
Soft top system .............................. 72
Cleaning the soft top fabric ....... 154
Locking rear soft top manually .... 177
Mounting the side rails .............. 76
............... 46
Opening and closing the rear
soft top ............................... 56, 74
Opening and closing the retractable soft top
Removing the side rails .............. 75
Storing the side rails ................ 75
Sound package .............................. 100
SRS (Supplemental Restraint System)
Indicator lamp ........................ 166
Standing water, driving through ...... 148
Starter switch positions .................. 57
Starting the engine ........................ 78
Status indicator ............................ 90
Steering wheel gearshift control ...... 26
Storage compartments .................... 109
Coin holder ............................. 110
Door pockets ............................ 110
Drawer .................................... 111
Glove box ................................ 110
in the tailgate ......................... 111
Parcel nets .............................. 111
Storage tray in center console ..... 111
Storage trays next to steering
wheel ..................................... 110
Storing tires ............................... 134
Sun screen ................................... 113
Sun visors ................................... 113
............... 56, 73
T
Tailgate
Closing ............................... 55, 57
Opening .............................. 54, 56
Tail lamps ................................... 180
Technical data
Air conditioning refrigerant ..... 221
Brake fluid ............................. 221
Coolant .................................. 223
Engine oil additives .................
Engine oils ............................. 220
Fuel requirements .................... 222
Gasoline additives ................... 222
Identification labels ................ 213
Premium unleaded gasoline ........ 221
Rims and tires ......................... 217
Service fluids and capacities ..... 218
221
Page 13
Index
11
Vehicle specification (model
BRABUS) ................................. 216
Vehicle specification (model
passion) ................................. 215
Vehicle specification (model
pure) ..................................... 215
Windshield/rear window washer
system ............................. 220, 222
Technical data (dimensions)
see Vehicle specification
Technical data (weights)
see Vehicle specification
Temperature
Coolant .................................. 150
Interior temperature ................ 104
Outside ................................... 89
Tether anchorage points
see Children in the vehicle
Thorax-pelvis side air bags ............. 38
Tightening torque
Wheels ................................... 135
TIN (Tire Identification
Number) ................................. 138, 141
Tire and Loading Information
placard ....................................... 130
Tire and loading terminology .......... 139
Tire Identification Number
see TIN
Tire inflation pressure
Checking ................................ 126
Important notes on .................... 126
Placard on driver’s door B-
pillar .................................... 130
Tire labeling ............................... 135
Tire load rating ........................... 141
Tire ply composition and material
used ........................................... 141
Tire Pressure Monitoring System
(TPMS) ........................................ 127
Tire repair kit ....................... 158, 186
Tires .................................... 124, 217
Air pressure ........................... 125
Care and maintenance ............... 133
Cleaning ................................ 134
Direction of rotation, spinning .. 133
Driving instructions ................ 146
Flat tire ................................. 186
Important notes on tire
inflation pressure ....................
Inflation pressure .............. 126, 127
Information placard ................. 130
Inspection .............................. 133
Labeling ................................ 135
Load rating ............................. 141
Ply composition and material
used ...................................... 141
Problems under-/overinflation ... 126
Retreads ................................. 124
Rims and tires (technical data) ... 217
Rotation ................................. 135
Service life ............................ 133
Sizes ..................................... 217
Snow chains ............................ 142
Speed rating ................ 137, 141, 147
Storing .................................. 134
Temperature ...................... 126, 135
Terminology ............................ 139
Tire Identification Number .. 138, 141 Tire Pressure Monitoring
System (TPMS) .......................... 127
Traction ...................... 134, 141, 147
Tread ..................................... 141
Tread depth ....................... 133, 142
Treadwear indicators .......... 133, 142
Vehicle maximum load on ........... 142
Wheel change ........................... 194
Winter tires ...................... 142, 217
Tire speed rating .................... 137, 141
Top tether
see Children in the vehicle
Total load limit ............................ 141
Tow-away alarm ............................. 49
Towing ....................................... 202
Traction ................................ 141, 147
Transmission
see Automatic transmission
Transmission position indicator ...... 88
Transmitting power values .............. 212
Traveling abroad .......................... 150
Tread (tires) ................................ 141
Tread depth (tires) .................. 133, 142
Treadwear indicators (tires) ..... 133, 142
Trip odometer, resetting ................. 90
Turning off the engine .................... 82
126
Page 14
12
Index
Turn signal lamps ......................... 179
Turn signals ................................. 68
Indicator lamps ....................... 169
U
Uniform Tire Quality Grading
Standards .............................. 134, 142
Unleaded gasoline, premium ........... 221
Unlocking the vehicle ..................... 52
Manually .................................
USB socket .................................... 99
176
V
Vehicle
Bulbs ..................................... 178
Care ...................................... 150
Identification Number (VIN) ....... 214
Locking/unlocking Modifications and alterations,
Operating safety ....................... 15
Towing ................................... 202
Unlocking/locking manually ....... 176
Vehicle dimensions
see Vehicle specification
Vehicle Identification Number
(VIN) .......................................... 214
Vehicle lighting ............................ 64
Vehicle loading
Instructions ............................ 112
Load limit .............................. 131
Roof rack ................................ 112
Terminology ............................ 139
Vehicle maximum load on the tire .... 142
Vehicle specification
Model BRABUS .......................... 216
Model passion ......................... 215
Model pure .............................. 215
Vehicle washing
see Vehicle care
Vehicle weights
see Vehicle specification
Ventilation
see HVAC ................................ 102
.................... 52
W
Warning signals
Anti-theft warning system .......... 175
Brake pads .............................. 176
Door ...................................... 175
Parking .................................. 176
Seat belt reminder system
Warranty coverage ......................... 212
Warranty information ...................... 13
Washer fluid
Mixing ratio ........................... 222
Refilling ............................... 122
Wiping .................................... 71
Washer jet nozzles ......................... 186
Washing the vehicle ...................... 150
Weights (vehicle)
see Vehicle specification
Wheel change ............................... 194
Wheel cover ................................. 194
Wheels, sizes ............................... 217
Wheels, Tires and .......................... 124
Where will I find...?
First-aid kit ........................... 158
Tire repair kit ........................ 158
Window curtain air bags .................. 38
Windshield
Washer fluid ....................... 71, 222
Wipers .................................... 70
Windshield wipers .......................... 70
Adjusting washer jet nozzles ...... 186
Rain-light sensor ...................... 71
Replacing wiper blades ............. 184
Winter driving
Driving instructions ................ 148
Snow chains ............................ 142
Tires ..................................... 142
Winter tires ........................... 142, 217
.... 165, 175
Page 15
>> Introduction.
13

Product information

We
recommend using Genuine smart Parts as well as conversion parts and accessories explicitly approved by smart for your vehicle model.
We have tested these parts to determine their reliability, safety and special suitability for smart vehicles.
We are unable to make an assessment for other products and therefore cannot be held responsible for them, even if in individual cases an official approval or authorization by governmental or other agencies should exist. Use of such parts and accessories could adversely affect the safety, performance or reliability of your vehicle. We strongly recommend that you not use them.
Genuine smart Parts as well as conversion parts and accessories approved by us are available at your authorized smart center where you will receive comprehensive information about use and installation of appropriate parts.
authorized smart center will be glad to demonstrate the proper procedures.
We continuously strive to improve our product, and ask for your understanding that we reserve the right to make changes in design and equipment. Therefore, information, illustrations and descriptions in this Operator’s Manual might differ from your vehicle.
Optional equipment is also described in this manual, including operating instructions wherever necessary. Since they are special-order items, the descriptions
and illustrations herein may vary slightly from the actual equipment of your vehicle.
If there are any equipment details that are not shown or described in this Operator’s Manual, your authorized smart center will be glad to inform you of correct care and operating procedures.
The Operator’s Manual and Maintenance/ Warranty Booklet (USA only) or Service/ Warranty Booklet (Canada only) are important documents and should be kept with the vehicle.

Operator’s Manual

This Operator’s Manual contains a great deal of useful information. We urge you to read it carefully and familiarize yourself with the vehicle before driving.
For
your own safety and longer service life of the vehicle, we urge you to follow the instructions and warnings contained in this manual. Ignoring them could result in damage to the vehicle or personal injury to you or others. Vehicle damage caused by failure to follow instructions is not covered by the smart Limited Warranty.
Your vehicle may have some or all of the equipment described in this manual. Therefore, you may find explanations for optional equipment not installed in your vehicle. If you have any questions about the operation of any equipment, your

Warranty information

The smart USA Warranty booklet (USA only) or the Warranty booklet (Canada only) contains detailed information about the warranties covering your smart, including:
R
smart USA Limited Warranty (USA only)
R
New Vehicle Limited Warranty (Canada only)
R
Emission System Warranty
R
Emission Performance Warranty
R
Corrosion Warranty
R
California, Connecticut, Maine, Massachusetts, New York, Pennsylvania, Rhode Island, and Vermont Emission Control System Warranty
Page 16
>> Introduction.
14
R
smartmove Assistance (Canada only)
R
State Warranty Enforcement Laws (Lemon Laws, USA only)

Important notice for California retail buyers and lessees of smart automobiles

Under California law you may be entitled to
a replacement of your vehicle or a refund of the purchase price or lease price, if Daimler Vehicle Innovations USA LLC and/ or its authorized repair or service facilities fail to fix one or more substantial defects or malfunctions in the vehicle that are covered by its express warranty after a reasonable number of repair attempts. During the period of 18 months from original delivery of the vehicle or the accumulation of 18 000 miles (approximately 29 000 km) on the odometer of the vehicle, whichever occurs first, a reasonable number of repair attempts is presumed for a retail buyer or lessee if one or more of the following occurs:
(1) the same substantial defect or
malfunction is likely to cause death or serious bodily injury if the vehicle is driven, that defect or malfunction has been subject to repair two or more times, and you have directly notified Daimler Vehicle Innovations USA LLC in writing of the need for its repair,
(2) the same substantial defect or
malfunction of a less serious nature than category (1) has been subject to repair four or more times and you have directly notified us in writing of the need for its repair, or
(3) the vehicle is out of service by reason
of repair of the same or different substantial defects or malfunctions for a cumulative total of more than 30 calendar days.
results in a condition that
Written notification should not be sent to a dealer, it should be addressed to:
Daimler Vehicle Innovations USA LLC One Mercedes Drive Montvale, NJ 07645

Maintenance

The
Scheduled Maintenance Guide (USA) and Service Booklet (Canada) describes all the necessary maintenance work which should be performed at regular intervals. It is important that you service your vehicle in accordance with the prescribed maintenance schedule. Failure to do so may render your vehicle unsafe, it may affect the durability of the vehicle, and it may otherwise void the limited, express warranty.
Always have the Scheduled Maintenance Guide (USA) or Service Booklet (Canada) with you when you take the vehicle to your authorized smart center for service. The service advisor will record each service in the booklet for you.

Roadside Assistance

The smartmove Assistance (Canada) and smart 1 service (USA) Program provides factory of a breakdown. Calls to the toll-free Roadside Assistance number
1-800-762-7887 (in the USA)
1-877-627-8004 (in Canada)
will be answered by smart Customer Assistance Representatives 24 hours a day, 365 days a year.
Roadside Assistance will be provided in accordance with standard program guidelines which include providing service to the vehicle up to a reasonable distance from a paved roadway. We will make every effort to assist in a breakdown situation, however, the accessibility of
trained technical help in the event
Page 17
>> Introduction.
15
your vehicle will be determined by our authorized smart center technician or the tow service provider on a case-by-case basis and may be a factor in our ability to respond.
Additional charges may be applicable for
breakdown location determined not to be
a a reasonably accessible roadside location as determined by our authorized technician and tow service provider.
For additional information refer to the smart Roadside Assistance Program brochure (USA) or the Warranty Booklet (Canada) in your vehicle literature portfolio.

Change of address or ownership

In the USA: If you change your address, be sure to send in the “Information Change Card” found in the Warranty Information Booklet.
In Canada: If you change your address, be sure to send in the “Change of Address Notice” found in the Warranty Booklet, or simply call the Customer Service at 1-800-387-0100.
Maintaining your current address information with smart will enable us to contact you should important new information about the vehicle, such as recalls, become available.
If you sell your smart, please leave all literature with the vehicle to make it available to the next operator.
In
the USA: If you bought this vehicle used, be sure to send in the “Information Change Card” found in the Warranty Information Booklet.
In Canada: If you bought this vehicle used, be sure to send in the “Notice of Pre‑Owned Vehicle Purchase” found in the Warranty Booklet, or call the Customer Service at 1-800-387-0100.

Operating your vehicle outside the USA or Canada

If you plan to operate your vehicle in foreign countries, please be aware that:
R
Service facilities or replacement parts may not be readily available.
R
Unleaded gasoline for vehicles with catalytic converters may not be available; the use of leaded fuels will damage the catalysts.
R
Gasoline may have a considerably lower octane rating, and improper fuel can cause engine damage.

Operating safety

WARNING
G
Work improperly carried out on electronic components and associated software could cause them to cease functioning. Because the vehicle’s electronic components are interconnected, any modifications made may produce an undesired effect on other systems. Electronic malfunctions could seriously impair the operating safety of your vehicle.
See an authorized smart center for repairs or modifications to electronic components.
Improper work or modifications on other vehicle systems could also have a negative impact on the operating safety of the vehicle.
WARNING
G
Some safety systems only function while the engine is running. You should therefore never turn off the engine while driving.
WARNING
G
Heavy blows against the vehicle underbody or tires/wheels, for example when running over an obstacle, road debris or a pothole,
Z
Page 18
>> Introduction.
16
may cause serious damage and impair the operating safety of your vehicle.
If you feel a sudden significant vibration or ride disturbance, or you suspect that damage to your vehicle has occurred, you should turn on your hazard warning flashers, carefully slow down, and drive with caution to an area which is a safe distance from the road.
Inspect the vehicle underbody and tires/ wheels for possible damage. If the vehicle appears authorized smart center or other qualified maintenance or repair facility for further inspection or repairs.
unsafe, have it towed to the nearest

Proper use of the vehicle

Proper
use of the vehicle requires that you are familiar with the following information and rules:
R
the safety precautions in this manual
R
the “Technical data” section in this manual
R
traffic rules and regulations
R
motor vehicle laws and safety standards
WARNING
G
Various warning labels are attached to your vehicle. to make you and others aware of various risks. You should not remove any of these warning labels unless explicitly instructed to do so by information on the label itself. Removal of any of these labels may cause you and others to be unaware of certain risks which may result in an accident and/or personal injury.
These warning labels are intended

Problems with your vehicle

If you should experience a problem with your vehicle, particularly one that you believe may affect its safe operation, we urge you to immediately contact an
authorized smart center to have the problem diagnosed and corrected if required. Do not drive the vehicle if you believe
it may not be safely operated. If the matter is not handled to your satisfaction, please discuss the problem with the smart center management, or if necessary contact us at one of the following addresses:
In the USA: Daimler Vehicle Innovations USA LLC One Mercedes Drive Montvale, NJ 07645
In Canada: Customer Relations Department 98 Vanderhoof Avenue Mercedes-Benz Canada, Inc. Toronto, Ontario, M4G 4C9

Reporting safety defects

For the USA only: The following text is published as required of manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the National Traffic and Motor Vehicle Safety Act of 1966.
If
you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Daimler Vehicle Innovations USA LLC.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Daimler Vehicle Innovations USA LLC.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to
Page 19
http://www.safercar.gov ; or write to: Administrator, NHTSA Headquarters, 1200 New Jersey Avenue, SE, West Building, Washington, DC 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov.

Vehicle data recording

Information regarding electronic recording devices

(Including notice pursuant to California Code § 9951)
Please note that your vehicle is equipped with devices that can record vehicle systems data.
This information helps, for example, to diagnose
vehicle systems after a collision and to continuously improve vehicle safety. smart may access the information and share it with others
R
for safety research or vehicle diagnosis purposes
R
with the consent of the vehicle owner or lessee
R
in response to an official request by law enforcement or other government agency
R
for use in dispute resolution involving smart, its affiliates or sales/service organization and/or
R
as otherwise required or permitted by law
>> Introduction.
17
Z
Page 20
18
Page 21
Exterior view ................................... 20
Cockpit ........................................... 21
Instrument cluster (miles) .................. 22
Instrument cluster (kilometers) ........... 24
Steering wheel gearshift control .......... 26
Center console .................................. 27
Overhead control panel ...................... 28
Door control panel ............................ 28
>> At a glance.
Page 22

Exterior view

20
Exterior view
>> At a glance.
Function Page
:
Rear window defroster 106
;
Cargo compartment: Locking/unlocking 53 Opening/closing
(cabriolet) 56 Opening/closing (coupé) 55
=
Soft top system (cabriolet) 72
?
Fuel filler flap 116
A
Doors: Locking/unlocking 53 Locking/unlocking
manually 176
B
Exterior rear view mirrors 61
C
Service flap 120 Coolant 122 Windshield washer fluid 122
D
Windshield wipers 70 Wiper blades
184
Function Page
E
Windshield: Defrosting 106 Wiping with windshield
washer fluid 71
F
Front lamps 179
G
Towing 202 Front towing eye bolt 202
H
Tires and wheels 124,
Tire Pressure Monitoring System* 125
Flat tire 186
I
Rear lamps 180
J
Rear towing eye bolt 202
K
Engine compartment cover 117 Engine oil 118
217
* optional
Page 23

Cockpit

Cockpit
21
>> At a glance.
Function Page
:
Exterior lamp switch 64
;
Steering wheel
=
Instrument cluster 22
?
Steering wheel gearshift
1
control 84
A
Tachometer* 92
B
Cockpit clock* 92
C
Glove box 110
AUX/USB sockets* 100
D
Overhead control panel 28
E
Audio system* 98
F
Center console switches 27
G
Coin holder 110 Retractable soft top
2
switch
1
Model pure only: The steering wheel in this vehicle varies from steering wheel illustrated.
2
cabriolet only.
74
Function Page
H
Gear selector lever 82
I
Starter switch 57
J
Cup holder 107
K
Auxiliary power outlet 114
L
Storage tray* 111
M
Wiper switch 70
Cruise control switch* 100 Control lever (control
system)* 93
N
On-board Diagnostics Socket (OBD) 213
O
Horn
P
Cruise control buttons* 100
Q
Door control panel 28
R
Inside door handle 54
* optional
Page 24

Instrument cluster (miles)

22
Instrument cluster (miles)

Miles

>> At a glance.
Instrument cluster (U.S. vehicles)
Function Page
:
Speedometer
;
Right indicator and warning lamp display 23
=
Adjusting instrument cluster illumination 92
Setting digital clock 88
?
Multifunction display 86
A
Center indicator and warning lamp display 23
B
Selecting display for status indicator 90
Setting digital clock 88
C
Left indicator and warning lamp display 23
Page 25
Indicator and warning lamps
Instrument cluster (miles)
23
>> At a glance.
Function Page
:
M
Low‑beam
indicator
;
=
?
A
B
C
D
E
headlamp lamp
#
Left turn signal indicator lamp
÷
ESP® warning lamp
!
Right turn signal indicator lamp
D
EPS* warning lamp
;
Engine malfunction indicator lamp
ò
ABS indicator lamp
$
Brake warning lamp
5
Engine oil pressure indicator lamp
65,
169
68,
169
167
68,
169
167
171
163
164
171
Function Page
F
?
Coolant temperature warning lamp
G
®
Fuel cap indicator lamp
H
#
Battery indicator lamp
I
6
SRS indicator lamp
J
7
Seat belt telltale
K
h
Combination low tire pressure/TPMS malfunction telltale*
L
K
High‑beam headlamp lamp
indicator
170
170
168
166
165
172
67,
169
* optional
Page 26

Instrument cluster (kilometers)

24
Instrument cluster (kilometers)

Kilometers

>> At a glance.
Instrument cluster (Canada vehicles)
Function Page
:
Speedometer
;
Right indicator and warning lamp display 25
=
Adjusting instrument cluster illumination 92
Setting digital clock 88
?
Multifunction display 86
A
Center indicator and warning lamp display 25
B
Selecting display for status indicator 90
Setting digital clock 88
C
Left indicator and warning lamp display 25
Page 27
Indicator and warning lamps
Instrument cluster (kilometers)
25
>> At a glance.
Function Page
:
M
Low‑beam
indicator
;
=
?
A
B
C
D
E
headlamp lamp
#
Left turn signal indicator lamp
÷
ESP® warning lamp
!
Right turn signal indicator lamp
D
EPS* warning lamp
;
Engine malfunction indicator lamp
!
ABS indicator lamp
J
Brake warning lamp
5
Engine oil pressure indicator lamp
65,
169
68,
169
167
68,
169
167
171
163
164
171
Function Page
F
?
Coolant temperature warning lamp
G
®
Fuel cap indicator lamp
H
#
Battery indicator lamp
I
6
SRS indicator lamp
J
7
Seat belt telltale
K
h
Combination low tire pressure/TPMS malfunction telltale*
L
K
High‑beam headlamp lamp
indicator
170
170
168
166
165
172
67,
169
* optional
Page 28

Steering wheel gearshift control

26
Steering wheel gearshift control
>> At a glance.
Function Page
:
Multifunction display 86
;
Right shift paddle3: Upshift 85
=
Left shift paddle3: Downshift 85
i
Model pure only:
steering wheel in this vehicle varies
The from steering wheel illustrated.
3
Model passion and BRABUS only.
Page 29

Center console

Center console
27
>> At a glance.
Function Page
:
Tachometer* 92
;
Cockpit clock* 92
=
HVAC 102
?
Audio system* 98
A
Switching front fog lamps* on/off 68
B
Central locking switch 54
C
Hazard warning flasher switch 69
D
Switching tow-away protection*/interior motion sensor* on/off
E
Restarting TPMS button
49
127
Function Page
F
Switching seat heating* on/off, passenger side 60
G
Central unlocking switch 54
H
Switching seat heating* on/off, driver’s side 60
I
Storage tray* 111
J
Gear selector lever 82
K
Starter switch 57
L
Parking brake lever 80
M
Coin holder 110 Retractable soft top
4
switch
N
Cup holder 107
74
4
cabriolet only.
* optional
Page 30

Door control panel

28

Overhead control panel

>> At a glance.
Function Page
:
Passenger front air bag off indicator lamp
;
Switching interior lighting on/off 69
=
Interior rear view mirror 62
41,
162
Door control panel
Function Page
:
Inside door handle 54
;
Adjusting exterior rear view mirrors:
Manually 61
Electrically
=
Opening and closing right
5
side window: Manually 77
Electrically
?
Opening and closing left
5
side window: Manually 77
Electrically
5
61
77
77
5
Model passion and BRABUS only.
Page 31
Occupant safety ................................ 30
Panic alarm ..................................... 45
Driving safety systems ....................... 46
Anti-theft systems ............................ 48
>> Safety.
Page 32

Occupant safety

30
Occupant safety

Introduction

The smart vehicle is equipped with seat belts
and dual stage air bags to protect you in a crash. However, children can be killed or seriously injured by an inflating air bag. Indeed, there is a stronger risk of serious death or bodily injury when an air
>> Safety.
bag deploys on a child positioned in a rear-facing child seat in the passenger seat. Because this vehicle has only two front seats and no backseat, it is limited as are other two-seat vehicles, in the extent to which it may restrain children traveling in the passenger front seat. Many states have laws against placing children of certain ages in the front seat of a vehicle that has both front and back seats. Those laws make exceptions to permit children to be restrained in the front seat of two seat vehicles. Special instructions and warnings are provided below about when and if you may restrain a child in the passenger seat of the smart vehicle. Under certain circumstances, it is appropriate for the passenger air bag not to operate when a child is restrained in a car seat in the passenger seat, and this vehicle is equipped with technology to accomplish this. Please pay very close attention to the instructions and warnings below, particularly as they relate to children.
In this section you will learn the most important facts about the restraint system components of the vehicle.
The restraint systems are:
R
Seat belts (Y page 31)
R
Child restraints (Y page 43)
Additional protection potential is provided by:
R
Supplemental Restraint System (SRS) with
-
Air bags (Y page 33)
-
Air bag control unit (with crash sensors)
-
Emergency Tensioning Devices and seat belt force limiters
R
Air bag system components with
-
Passenger front air bag off indicator
(Y page 33)
lamp (Y page 41)
-
Passenger seat with Occupant Classification System (OCS) (Y page 39)
Although independent systems, their protective functions work in conjunction with each other.
i
For information on infants and children traveling with you in the vehicle and restraint systems for infants and children, see “Children in the vehicle” (Y page 42).
The SRS system conducts a self-test when the ignition is switched on and in regular intervals while the engine is running. This facilitates detection of malfunctions. The SRS indicator lamp 6 in the instrument cluster comes on when the ignition is switched on and goes out after approximately four seconds.
The SRS components are in operational readiness if the SRS indicator lamp 6 is not lit when the engine is running.
A malfunction in the system has been detected if the SRS indicator lamp 6
R
fails to go out after approximately 4 seconds after the ignition was switched on
R
does not come on at all
R
comes on after the engine was started or while driving
Page 33
Occupant safety
31
WARNING
G
Modifications to or work improperly conducted on restraint systems (such as seat belts and anchors, Emergency Tensioning Devices, seat belt force limiters or air bags) or their wiring, as well as tampering with interconnected electronic systems, can lead to the restraint intended. Air bags or Emergency Tensioning Devices, for example, could deploy inadvertently or fail to deploy in accidents in which they otherwise should deploy (although the deceleration threshold for air bag deployment is exceeded). Therefore, never modify the restraint systems. Do not tamper with electronic components or their software.
G
In the event that the SRS indicator lamp 6 comes on while driving or does not come on at all, the SRS self-check has detected strongly recommend that you immediately but safely pull the vehicle off of the roadway and stop driving. Contact an authorized smart center immediately to have the system checked; otherwise the SRS may not deploy when needed in an accident, which could result in serious or fatal injury, or it might deploy unexpectedly and unnecessarily which could also result in injury.
In addition, improper repair work on the SRS creates a risk of rendering the SRS inoperative or causing unintended air bag deployment. Work on the SRS must therefore only be performed by qualified technicians. Contact an authorized smart center. If it is necessary to modify an air bag system to accommodate a person with disabilities, contact your local authorized smart center.
systems no longer functioning as
WARNING
a malfunction. For your safety, we

Seat belts

The use of seat belts and infant and child restraint
systems is required by law in all 50 states, the District of Columbia, the U.S. territories and all Canadian provinces and territories.
Even where this is not the case, all vehicle occupants should have their seat belts fastened whenever the vehicle is being operated.
For more information, see “Fastening the seat belts” (Y page 62).
i
For information on infants and children traveling with you in the vehicle and restraint systems for infants and children, see “Children in the vehicle” (Y page 42).
WARNING
G
Always fasten your seat belt before driving.
make sure all of your passengers are
Always properly restrained.
Failure to wear and properly fasten and position your seat belt greatly increases your risk of injuries and their likely severity in an accident. You and your passenger should always wear seat belts.
If you are ever in an accident, your injuries can be considerably more severe without your seat belt properly buckled.
Without your seat belt buckled, you are much more likely to hit the interior of the vehicle or be ejected from it. You can be seriously injured or killed.
In the same crash, the possibility of injury or death is lessened if you are properly wearing your seat belt. Air bags can only protect you if you are properly wearing your seat belt.
WARNING
G
Never ride in a moving vehicle with the seat backrest in an excessively reclined position as this can be dangerous. You could slide under the seat belt in a
>> Safety.
Z
Page 34
Occupant safety
32
collision. If you slide under it, the belt would apply force at the abdomen or neck, causing
serious or even fatal injuries. The seat backrest and seat belt provide the best restraint when the wearer is in a position that is as upright as possible and the belt is properly positioned on the body.
WARNING
G
>> Safety.
Never let more people ride in the vehicle than there are seat belts available. Make sure everyone riding in the vehicle is correctly restrained with a separate seat
Never use a seat belt for more than one
belt. person at a time.
WARNING
G
Seat belts of a vehicle involved in an accident must be inspected by smart. Only then is it possible to determine whether the seat belts were damaged or stressed in the accident. Damaged or stressed seat belts may not properly protect you in a subsequent accident.
Only use seat belts which have been approved by smart.
Do not make any modifications to the seat belts. This can lead to unintended activation of the Emergency Tensioning Devices (ETDs) or to their failure to activate when necessary.
Do not bleach or dye seat belts as this may severely weaken them. In a crash, they may
be able to provide adequate protection.
not
Have all work carried out only by qualified technicians. Contact an authorized smart center.
WARNING
G
USE SEAT BELTS PROPERLY
R
Seat belts can only work when used properly. Never wear seat belts in any other way than as described in this
section, as that could result in serious injuries in case of an accident.
R
occupant should wear their seat belt
Each at all times, because seat belts help reduce the likelihood of and potential severity of injuries in accidents, including rollovers. The integrated restraint system includes SRS (driver front air bag, passenger front air bag, head-thorax air bags) and Emergency Tensioning Devices (ETDs) with seat belt force limiters.
The system is designed to enhance the protection provided by secured seat belts in certain frontal and side impacts.
R
Never wear the shoulder belt under your arm, against your neck or off your shoulder. Doing so may cause your body to move too far forward in a frontal crash, which would increase the chance of head and neck injuries. The seat belt would also apply too much force to the ribs or abdomen, which could severely injure internal organs such as your liver or spleen.
R
Never wear seat belts over rigid or breakable objects in or on your clothing, such as eyeglasses, pens, keys, etc., as these might cause injuries.
R
Position the lap belt as low as possible on your hips and not across the abdomen. If the lap seat belt is positioned across your abdomen, it could cause serious injuries in a crash.
R
Never use a seat belt for more than one person at a time. Do not fasten a seat belt around a person and another person or other objects at the same time.
R
Seat belts should not be worn twisted. In a crash, you would not have the full width of the seat belt to manage impact forces. The twisted seat belt against your body could cause injuries.
R
Pregnant women should also always use a lap-shoulder belt. The lap belt portion
Page 35
Occupant safety
33
should be positioned as low as possible on the hips to avoid any possible pressure on the abdomen.
R
Never place your feet on the instrument panel, dashboard or on the seat. Always
both feet on the floor in front of the
keep seat.
R
When using a seat belt to secure infant or toddler restraints or children in booster seats, always follow the child seat manufacturer’s instructions.

Emergency Tensioning Devices (ETDs) and seat belt force limiters

The seat belts are equipped with Emergency Tensioning Devices and seat belt force limiters.
Emergency Tensioning Devices are designed to activate in the following cases:
R
in frontal or rear-end impacts exceeding the system deployment threshold
R
if the restraint systems are operational and functioning correctly
R
in collisions with high vehicle deceleration/acceleration in the longitudinal direction, e.g. a head-on collision
R
on passenger side when the seat is occupied and the seat belt is fastened
R
independently of the front air bags
When activated, Emergency Tensioning Devices
remove slack from the seat belts in such a way that the seat belts fit more snugly against the body. Seat belt force limiters, when activated, reduce the force exerted by the seat belts on occupants during a crash.
When the emergency tensioning device is triggered, the SRS indicator lamp 6 in the instrument cluster illuminates, see “SRS indicator lamp” (Y page 166).
WARNING
G
Once they have been triggered, Emergency Tensioning properly and must be replaced. smart recommends that you visit a qualified workshop to have this done. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop.
Comply with safety regulations when disposing of Emergency Tensioning Devices. These regulations are available at any smart center.
Devices will no longer function
The belt force limiter is designed to operate in unison with the front air bag, which absorbs a portion of the seat belt’s decelerating forces, distributing the load over a larger area.
In the event of a head-on or rear-end collision, the emergency tensioning device is activated if the vehicle is decelerated or accelerated sufficiently in the longitudinal direction at the start of impact with the ignition switched on.

Air bags

Air bags can reduce the severity of injuries in serious collisions, e.g. in a head-on collision or a side impact.
WARNING
G
Air bags are designed to reduce the potential of injury in certain frontal impacts (front air bags and knee bags), or side impacts (head-thorax air bags,
curtain air bags and thorax-pelvis
window air bags) which may cause significant injuries. However, no system available today can completely eliminate injuries and fatalities.
The deployment of the air bags temporarily releases a small amount of dust from the air bags. This dust is neither injurious to your health, nor does it indicate a fire in the vehicle. The dust might cause some
>> Safety.
Z
Page 36
Occupant safety
34
temporary breathing difficulty for people with asthma or other breathing trouble. To avoid this, you may wish to get out of the vehicle have any breathing difficulty but cannot get out of the vehicle after the air bag inflates, then get fresh air by opening a window or door.
>> Safety.
G
To reduce the risk of injury when the front air bags inflate, it is very important for the driver and passenger to always be in a properly respective seat belt.
For maximum protection in the event of a collision always be in normal seated position with your back against the backrest. Fasten your seat belt and ensure it is properly positioned on your body.
Since the air bag inflates with considerable speed and force, a proper seating and hands on steering wheel position will help to keep you at a safe distance from the air bag.
Occupants who are unbelted, out of position or too close to the air bag can be seriously injured or killed by an air bag as it inflates extremely quickly and with great force:
R
R
R
as soon as it is safe to do so. If you
WARNING
seated position and to wear their
Sit properly belted in a position that is as upright as possible with your back against the seat backrest.
Adjust the driver’s seat as far as possible rearward, still permitting proper operation of vehicle controls. The distance from the center of the driver’s breastbone to the center of the air bag cover on the steering wheel must be at least 10 inches (25 cm) or more. You should be able to accomplish this by adjustments to the seat. If you have any problems, please contact an authorized smart center.
Do not lean your head or chest close to the steering wheel or dashboard.
R
Keep
hands on the outside of the steering wheel rim. Placing hands and arms inside the rim can increase the risk and potential severity of hand/arm injury when the driver’s front air bag inflates.
R
Adjust the passenger seat as far as possible rearward from the dashboard when the seat is occupied.
R
Occupants, especially children, should never place their bodies or lean their heads in the area of the door where the head-thorax air bag (cabriolet) or thorax-pelvis side air bag (coupé) inflates. This could result in serious injuries or death should the head-thorax air bag (cabriolet) or thorax-pelvis side air bag (coupé) be deployed. Always sit as upright as possible, wear the seat belt properly and use an appropriately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child.
Failure to follow these instructions can result in severe injuries to you or other occupants.
If you sell your vehicle, it is important that you make the buyer aware of this safety information. Be sure to give the buyer this Operator’s Manual.
i
Air bags are designed to deploy only in certain frontal impacts (front air bags and knee bags), or side impacts (head­thorax air bags, window curtain air bags and thorax-pelvis air bags) which exceed preset thresholds. Only during these events will they provide their supplemental protection.
The driver and passenger should always wear their seat belts. Otherwise it is not possible for air bags to provide their supplemental protection.
In case of other types of impacts and impacts below air bag deployment thresholds, air bags will not deploy. The driver and passenger will then be protected to the extent possible by a
Page 37
Occupant safety
35
properly fastened seat belt. A properly fastened seat belt is also needed to provide the best possible protection in a rollover.
caution you not to rely on the presence
We of the air bags in order to avoid wearing your seat belt.
It is important to your safety and that of your passenger that you replace deployed air bags and repair any malfunctioning air bags to make sure the vehicle will continue to provide supplemental crash protection for occupants.
Safety guidelines for the seat belt, Emergency Tensioning Devices (ETDs) and air bag
WARNING
G
R
Damaged been highly stressed in an accident must be replaced and their anchoring points must also be checked. Only use seat belts installed or supplied by an authorized smart center.
R
Air bags and Emergency Tensioning Devices (ETDs) contain Perchlorate material, which may require special handling and regard for the environment. Check with your local government’s disposal guidelines. California residents, see http://www.dtsc.ca.gov/ HazardousWaste/Perchlorate/index.cfm .
R
Given the considerable deployment speed, required inflation volume, and the textile structure of the air bags, there is the possibility of abrasions or other, potentially more serious injuries resulting from air bag deployment.
R
Air bags and Emergency Tensioning Devices (ETDs) are designed to function on a one-time-only basis. An air bag or ETD that has deployed must be replaced.
R
Do not pass seat belts over sharp edges. They could tear.
seat belts or seat belts that have
R
Do not make any modification that could change the effectiveness of the seat belts.
R
No modifications of any kind may be made to any components or wiring of the SRS. This includes changing or removing any component or part of the SRS, the installation of additional trim material, badges, etc. over the steering wheel hub, passenger front air bag cover, outboard sides of the seat backrests, and installation of additional electrical/ electronic equipment on or near SRS components and wiring. Keep area between air bags and occupants free from objects (e.g. packages, purses, umbrellas, etc.).
R
Do not bleach or dye seat belts as this may severely weaken them. In a crash they may not be able to provide adequate protection.
R
Do not hang hangers on the coat hooks or handles over the door. These items may turn into projectiles and cause head and other injuries when the head-thorax air bag is deployed.
R
Air bag system components will be hot after an air bag has inflated. Do not touch them.
R
Never place your feet on the instrument panel, dashboard, or on the seat. Always keep both feet on the floor in front of the seat.
R
In addition, improper repair work on the SRS creates a risk of rendering the SRS inoperative or causing unintended air bag deployment. Work on the SRS must therefore only be performed by qualified technicians. Contact an authorized smart center.
R
For your protection and the protection of others, when scrapping the air bag unit or Emergency Tensioning Devices (ETDs), our safety instructions must be followed. These instructions are available from any authorized smart center.
>> Safety.
Z
Page 38
Occupant safety
36
How an air bag operates
An air bag is inflated in a matter of milliseconds. If an air bag is triggered, the SRS indicator lamp 6 in the instrument cluster illuminates.
!
If the air bags are activated, you will hear a loud noise and some dust may be generated. The explosion fundamentally represents no risk to your hearing.
>> Safety.
An
inflated air bag slows down and reduces the movement of the occupant. When the occupant makes contact with a front air bag or head-thorax air bag (cabriolet only), hot gas flows out of the inflated front air bags and head-thorax air bags (cabriolet only). This reduces the load on the occupant’s head and upper body. These air bags are consequently deflated after the accident.
Driver front air bag/passenger front air bag
The front air bags are designed to reduce the potential of injury in certain frontal impacts.
Driver front air bag and passenger front air bag are deployed
R
at the start of an accident with high vehicle
deceleration in the longitudinal
direction
R
independently of other air bags in the vehicle being deployed
R
never in the event of a rollover, unless high vehicle deceleration in the longitudinal direction is detected
i
The front air bags in this vehicle have been designed to inflate in two stages. This allows the air bag to have different rates of inflation that are based on the rate of relevant vehicle deceleration and a fastened or unfastened seat belt as assessed by the air bag control unit.
On the passenger side, the front air bag deployment is additionally influenced
by the passenger’s weight category as identified by the Occupant Classification System (OCS) (Y page 39).
lighter the passenger side occupant,
The the higher the vehicle deceleration rate required for the second stage inflation of the air bag.
The air bags will not deploy in impacts which do not exceed the system’s deployment thresholds. In such instances, the seat belts are designed to protect you.
The passenger air bag will only be deployed if
R
the system, based on OCS weight sensor readings, senses that the passenger seat is occupied and the 4 0 indicator lamp is not lit (Y page 41)
R
the impact exceeds a preset deployment threshold
The driver front air bag is located in the steering wheel housing, the passenger front air bag above the glove box.
:
Driver front air bag
;
Passenger front air bag
Page 39
Occupant safety
37
Knee bags
:
Driver’s knee bag
;
Passenger knee bag
The knee bags are designed to provide increased protection for the driver and passenger against the risk of injuries to the knees, thighs and lower legs. The knee bags are located on the lower instrument panel. They are designed to operate together
with the front air bags in certain frontal impacts if the system determines that air bag deployment can offer additional protection to that provided by the seat belts. Knee bags operate best in conjunction with a properly positioned and fastened seat belts.
Head-thorax air bags (cabriolet only)
WARNING
G
There is a possibility for a head-thorax air
related injury if occupants, especially
bag children, are not properly seated or restrained when next to a head-thorax air bag which needs to deploy rapidly in a side impact in order to do its job.
To help avoid the possibility of injury, please follow these guidelines:
(1) Occupants, especially children,
should never place their bodies or lean their heads in the area of the door where the head-thorax air bag inflates. This could result in serious injuries or
death should the head-thorax air bag be deployed.
(2) Always sit as upright as
possible, properly use the seat belts, and for all children 12 years old or under, use an appropriately sized infant restraint, toddler restraint, or booster seat recommended for
size and weight of the child.
the
(3) Always wear seat belts properly.
WARNING
G
Only use seat covers which have been tested and approved by smart for your vehicle
A seat cover must have a deployment
model. control seam for the head-thorax air bag. Using other seat covers may interfere with or prevent the deployment of the head­thorax air bags. Contact an authorized smart center for availability.
If activated, the head-thorax air bags are intended to provide increased protection for the head and thorax (but not arms) of the occupants on the side of the vehicle that is struck.
The head-thorax air bags are deployed
R
on the side of the vehicle that is struck (when passenger side is struck only if the seat is occupied)
R
at the start of an accident with high vehicle deceleration or acceleration acting in a lateral direction, e.g. a side impact
R
regardless of whether or not the seat belt is in use
R
independently of the front air bags being deployed
R
independently of the emergency tensioning device
The head-thorax air bags are integrated into the driver and passenger seat backrests.
>> Safety.
Z
Page 40
Occupant safety
38
>> Safety.
:
Head-thorax air bag
Window curtain air bags and thorax­pelvis side air bags (coupé only)
WARNING
G
There is a possibility for a thorax-pelvis side air bag related injury if occupants, especially children, are not properly
or restrained when next to a thorax-
seated pelvis side air bag which needs to deploy rapidly in a side impact in order to do its job.
To help avoid the possibility of injury, please follow these guidelines:
(1) Occupants, especially children,
should never place their bodies or lean their heads in the area of the door where the thorax-pelvis side air bag inflates. This could result in serious injuries or death should the thorax-pelvis side air bag be deployed.
(2) Always sit as upright as
possible, properly use the seat belts, and for all children 12 years old or under, use an appropriately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child.
(3) Always wear seat belts properly.
WARNING
G
Only use seat covers which have been tested and approved by smart for your vehicle
A seat cover must have a deployment
model. control seam for the thorax-pelvis side air bag. Using other seat covers may interfere with or prevent the deployment of the thorax-pelvis side air bags. Contact an authorized smart center for availability.
Window curtain air bags
Window curtain air bags are designed to provide increased protection for the head, but not the chest or arms.
Window curtain air bags are deployed
R
on the impacted side of the vehicle
R
in instances with a high rate of lateral vehicle deceleration or acceleration
R
independently of the front air bags
R
regardless of whether the passenger seat is occupied
R
in a rollover if the system determines that air bag deployment can offer additional protection to that provided by the seat belt.
The window curtain air bags are integrated into the inner side of the roof frame. They run above the doors from the A-pillar to the B-pillar.
:
Window curtain air bags
Thorax-pelvis side air bags
Thorax-pelvis side air bags are designed to provide increased protection for the thorax and pelvis, but not the arms.
Page 41
Occupant safety
39
Thorax-pelvis side air bags are deployed
R
on the impacted side of the vehicle
R
in instances with a high rate of lateral vehicle deceleration or acceleration
R
independently of the front air bags
R
regardless
of whether the seat belt on the
impacted side of the vehicle is in use
R
independently of the ETDs.
Thorax-pelvis side air bags will generally not deploy in a rollover.
The thorax-pelvis side air bags will deploy, however, if the system detects
R
a high rate of lateral vehicle deceleration or acceleration, and
R
that air bag deployment can offer additional protection to that provided by the seat belt.
The thorax-pelvis side air bags are integrated into the driver and passenger seat backrests.
:
Thorax-pelvis side air bags

Occupant Classification System

The Occupant Classification System (OCS) automatically
turns the passenger front air bag on or off based on the classified occupant weight category determined by weight sensor readings from the passenger seat.
i Based on the classified occupant
weight category determined by weight
readings from the passenger seat,
sensor the system does also deactivate
R
head-thorax air bag (cabriolet)
R
the window curtain air bag (coupé)
R
the thorax-pelvis side air bag (coupé)
R
the seat Emergency Tensioning Devices
R
the seat belt force limiter.
Occupants must sit properly belted in a position that is as upright as possible with their back against the seat backrest and feet on the floor to be correctly classified. If the occupant’s weight is transferred to another object in the vehicle (e.g. by leaning on armrests), the OCS may not be able to properly approximate the occupant’s weight category.
i
If the seat, including the trim cover and cushion, needs to be serviced in any way, take the vehicle to an authorized smart center. Only seat accessories approved by smart may be used.
Both driver and the passenger should always use the 4 0 indicator lamp as an indication of whether or not the passenger is properly positioned (Y page 41).
WARNING
G
If the 4 0 indicator lamp illuminates when an adult or someone larger than a small individual is in the passenger seat, have the passenger re­position himself or herself in the seat until the 4 0 indicator lamp goes out.
In the event of a collision, the air bag
unit will not allow passenger front
control air bag deployment when the OCS has classified the passenger seat occupant as being up to or less than the weight of a typical 12‑month‑old child in a standard
>> Safety.
Z
Page 42
Occupant safety
40
child restraint, or if the passenger seat is sensed as being empty.
the OCS senses that the passenger seat
When occupant is classified as being up to or less than the weight of a typical 12‑month‑old child in a standard child restraint, the 4 0 indicator lamp will illuminate when the ignition is switched on and remain illuminated,
>> Safety.
indicating that the passenger front air bag is deactivated.
When the OCS senses that the passenger seat is classified as being empty, the 4 0 indicator lamp will illuminate and remains illuminated.
When the OCS senses that the passenger seat occupant is classified as being heavier than the weight of a typical 12‑month‑old child seated in a standard child restraint or as being a small individual (such as a young teenager or a small adult), the 4 0 indicator lamp will illuminate for approximately 4 seconds when the ignition is switched on and then, depending on occupant weight sensor readings from the seat, remains illuminated or goes out.
When the 4 0 indicator lamp is illuminated, the passenger front air bag is deactivated.
When the 4 0 indicator lamp is out and the passenger seat is occupied by an adult or someone larger than a small individual, the passenger front air bag is activated.
When the OCS senses that the passenger seat occupant is classified as an adult or someone larger than a small individual, the 4 0 indicator lamp will illuminate for approximately 4 seconds when the ignition is switched on and then goes out, indicating that the passenger front air bag is activated.
If the 4 0 indicator lamp is illuminated, the passenger front air bag is deactivated and will not be deployed.
If the 4 0
indicator lamp is not illuminated, the passenger front air bag is activated and will be deployed
R
in the event of certain frontal impacts
R
if impact exceeds a preset deployment threshold
R
independently of the head-thorax air bags
If the passenger front air bag is deployed, the rate of inflation will be influenced by
R
the rate of vehicle deceleration and a fastened or unfastened seat belt as assessed by the air bag control unit
R
the passenger’s weight category as identified by the OCS
WARNING
G
Children 12 years old and under must be seated and properly secured in an appropriate infant or child restraint recommended
for the size and weight of the
child.
The infant or child restraint must be properly secured with the vehicle’s seat belt, fully in accordance with the child seat manufacturer’s instructions.
Children can be killed or seriously injured by an inflating air bag. Note the following important information:
R
Your vehicle is equipped with air bag technology designed to turn off the passenger front air bag in your vehicle when the system senses the weight of a typical 12‑month‑old child or less along with the weight of a standard appropriate child restraint on the passenger seat.
R
A child in a rear-facing child restraint on the passenger seat will be seriously injured or even killed if the passenger front air bag inflates in a collision which could occur under some circumstances, even with the air bag technology installed in your vehicle.
Page 43
Occupant safety
41
R
If you install a rear-facing child restraint on the passenger seat, make sure the 4 0 indicator lamp is illuminated, indicating that the passenger front air bag is deactivated. Should the 4 0 indicator lamp not illuminate or go out while the restraint is installed, please check installation.
Periodically check the 4 0 indicator lamp while driving to make sure the 4 0 indicator lamp is illuminated.
If the 4 0 indicator lamp goes out or remains out, do not transport a child on the passenger seat until the system has been repaired.
A child in a rear-facing child restraint on the passenger seat may be seriously injured or even killed if the passenger front air bag inflates.
R
If you place a child in a forward-facing child restraint on the passenger seat, move the seat as far back as possible, use the proper child restraint recommended for the age, size and weight of the child by the seat manufacturer, and secure child restraint with the vehicle’s seat belt according to the child seat manufacturer’s instructions. For children larger than the typical 12‑month‑old child, the passenger front air bag may or may not be activated.
i
Deployment of the driver front air bag does not mean that the passenger front air bag also should have deployed.
The Occupant Classification System may have determined
R
that the seat was empty or occupied by the weight up to or less than that of a typical 12‑month‑old child seated in a standard child restraint — both instances where the system suppresses deployment of the passenger front air bag even though the impact met the criteria and was of
sufficient severity to deploy the driver front air bag
R
that the seat was occupied by a small individual (such as a young teenager or a small adult) or a child weighing more
the weight of a typical 12‑month‑old
than child in a standard child restraint — instances where the system may suppress deployment of the passenger front air bag even though the impact met the criteria and was of sufficient severity to deploy the driver front air bag
Passenger front air bag off indicator lamp
The indicator lamp is located on the overhead control panel.
Passenger front air bag off indicator lamp : illuminates when the passenger front air bag is deactivated.
WARNING
G
When the SRS indicator lamp 6 and the 4 0 indicator lamp are lit at
same time, there is a malfunction in the
the Occupant Classification System.
In order to ensure proper operation of the air bag system and OCS:
R
Have the system checked as soon as possible by qualified technicians. Contact an authorized smart center.
R
Sit properly belted in a position that is as upright as possible with your back against the seat backrest.
>> Safety.
Z
Page 44
Occupant safety
42
R
Do not lean on the armrests or lift yourself from the seat by using the handle over the door as this may cause the OCS to be unable to correctly approximate the occupant weight category.
R
Only have the seat repaired or replaced by an authorized smart center.
R
Read and observe all warnings in this chapter.
>> Safety.
Self-test Occupant Classification System
After turning the key in the starter switch to position 1 or 2, the 4 0 indicator lamp located in the center console illuminates. If an adult occupant is properly sitting on the passenger seat and
the system senses the occupant as being
an adult, the 4 0 indicator lamp will illuminate and go out after approximately 4 seconds.
If the seat is not occupied and the system senses the passenger seat as being empty, the 4 0 indicator lamp will illuminate and not go out.
WARNING
G
If the 4 0 indicator lamp does not illuminate immediately after starting the engine, the system is not functioning.
must contact an authorized smart center
You before seating any child on the passenger seat.
More information can be found in the “Practical hints” section (Y page 173).
WARNING
G
Never place anything between seat cushion and child seat (e.g. pillow), since it reduces the effectiveness of the Occupant Classification System. The bottom of the child seat must make full contact with the passenger seat cushion. An incorrectly mounted child seat could cause injuries to
the child in case of an accident, instead of increasing protection for the child.
Follow the manufacturer’s instructions for installation of child seats.

Children in the vehicle

If an infant or child is traveling with you in the vehicle:
X
Secure the child using an infant or child restraint
appropriate to the age and size
of the child.
X
Make sure the infant or child is properly secured at all times while the vehicle is in motion.
WARNING
G
Do not leave children unattended in the vehicle, restraint system. The children could
R
R
Do not expose the child restraint system to direct sunlight. The child restraint system’s metal parts, for example, could become very hot, and the child could be burned on these parts.
If children open a door, they could
R
R
Do not carry heavy or hard objects in the passenger compartment unless they are firmly secured in place.
For more information, please refer to the “Loading and storing section”.
even if they are secured in a child
injure themselves on parts of the vehicle
be seriously or fatally injured through excessive exposure to extreme heat or cold
injure other persons
get out of the vehicle and injure themselves or be injured by following traffic
Page 45
Occupant safety
43
Unsecured or improperly positioned cargo increases a child’s risk of injury in the event of
R
strong braking maneuvers
R
sudden changes of direction
R
an accident
Infant and child restraint system
We recommend all infants and children be properly restrained at all times while the vehicle is in operation.
The passenger lap-shoulder belt has a special seat belt retractor for secure fastening of child restraints.
To fasten a child restraint, follow all mounting instructions provided by the child
restraint manufacturer. Then pull the shoulder seat belt out completely and let it retract. During seat belt retraction, a ratcheting sound can be heard to indicate that the special seat belt retractor is activated. The seat belt is now locked. Push down on child restraint to take up any slack.
To deactivate, release seat belt buckle and let seat belt retract completely. To deactivate the special seat belt retractor for the passenger seat, the passenger seat must be in the most backward position. The seat belt can again be used in the usual manner.
WARNING
G
Never release the seat belt buckle while the vehicle belt retractor will be deactivated.
is in motion, since the special seat
The use of infant or child restraints is required by law in all 50 states, the District of Columbia, the U.S. territories, and all Canadian provinces and territories.
Infants and small children should be seated in an appropriate infant or child restraint system properly secured in accordance with the manufacturer’s instructions for
the child restraint, that complies with U.S. Federal
Motor Vehicle Safety Standards 213 and 225 and Canadian Motor Vehicle Safety Standards 213, 213.1 and 213.2.
A statement by the child restraint manufacturer of compliance with these standards can be found on the instruction label on the restraint and in the instruction manual provided with the restraint.
When using any infant restraint, toddler restraint, or booster seat be sure to carefully read and follow all manufacturer’s instructions for installation and use.
Please read and observe warning labels affixed to the inside of the vehicle and to infant or child restraints.
WARNING
G
Children 12 years old and under must be seated and properly secured in an appropriately sized infant restraint, toddler restraint, or booster seat recommended child.
The infant or child restraint must be properly secured with the vehicle’s seat belt fully in accordance with the child seat manufacturer’s instructions.
Occupants, especially children, should never place their bodies or lean their heads in the area of the door where the head-thorax air bags (cabriolet), window curtain air bags (coupé) and thorax-pelvis air bags (coupé) inflates. This could result in serious injuries or death should the head-thorax air bags (cabriolet), window curtain air bags (coupé) and thorax-pelvis air bags (coupé) be triggered. Always sit as upright as possible, properly use the seat belt and use an appropriately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child.
Children can be killed or seriously injured by an inflating air bag. Note the following
for the size and weight of the
>> Safety.
Z
Page 46
Occupant safety
44
important information when circumstances require you to place a child in the passenger seat:
R
Your vehicle is equipped with air bag technology designed to turn off the passenger front air bag in your vehicle
the Occupant Classification System
when senses the weight of a typical 12‑month‑old child or less along with the
>> Safety.
weight of an appropriate child restraint on the passenger seat.
R
A child in a rear-facing child restraint on the passenger seat may be seriously injured or even killed if the passenger front air bag inflates in a collision.
R
If you install a rear-facing child restraint on the passenger seat, make sure the 4 0 indicator lamp is illuminated, indicating that the passenger front air bag is deactivated.
Should the 4 0 indicator lamp not illuminate or go out while the restraint is installed, please check installation. Periodically check the 4 0 indicator lamp while driving to make sure the 4 0 indicator lamp is illuminated. If the 4 0 indicator lamp goes out or remains out, do not transport a child on the passenger seat until the system has been repaired. A child in a rear-facing child restraint on the passenger seat may be seriously injured or even killed if the passenger front air bag inflates.
R
If you place a child in a forward-facing child restraint on the passenger seat, move the seat as far back as possible, use a proper child restraint recommended for the age, size and weight of the child, and secure child restraint with the vehicle’s seat belt according to the child seat manufacturer’s instructions. For children larger than the typical 12‑month‑old child, the passenger front air bag may or may not be activated.
WARNING
G
Infants and small children should never share a seat belt with another occupant. During an accident, they could be crushed between the occupant and seat belt.
A child’s risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/or the child is not properly secured in the child restraint.
Children too big for a toddler restraint
ride in a seat using regular seat belt.
must
Position shoulder belt across chest and shoulder, not face or neck. A booster seat may be necessary to achieve proper seat belt positioning for children over 41 lbs until they reach a height where a lap­shoulder belt fits properly without a booster.
When the child restraint is not in use, remove it from the vehicle or secure it with the seat belt to prevent the child restraint from becoming a projectile in the event of an accident.
Do not leave children unattended in the vehicle, even if the children are secured in a child restraint system. Unsupervised children in a child restraint system may use vehicle equipment and may cause an accident and/or serious personal injury.
If you are using a rear-facing child restraint system on the passenger seat, you must verify that the passenger front air bag is deactivated. When the passenger front air bag is deactivated, the 4 0 indicator lamp is illuminated (Y page 41).
Top tether
Top tether permits an additional connection between a child restraint system and the passenger seat. Proper usage of the top tether, in accordance with instructions provided by the child restraint manufacturer, can further reduce the risk of injuries.
Page 47

Panic alarm

45
The top tether anchorage is located on the floor of the cargo compartment. The top tether guide for the top tether strap is located above, on the head restraint.
X
Thread top tether strap A through top tether guide : down the back of passenger seat ; to top tether anchorage =.
X
Attach top tether hook ? to top tether anchorage = on the floor of the cargo compartment.
i
If you are using divider plus*, the
hooks of the top tether and the divider
are attached to the same anchorage.
plus*
X
Install the child restraint system and tighten top tether strap A according to the child restraint manufacturer’s instructions.
WARNING
G
After installing top tether straps, make sure the seat backrests are in an upright position
and are properly locked. Push and
pull on the seat backrests to ensure they are properly a seat backrest is not properly locked, the seat backrest could fold. The child seat would no longer be properly supported or positioned to provide its intended benefit. That could cause serious or even fatal injuries.
secured in the locked position. If
Panic alarm
X
Activating: Press and hold button : for at least 1 second. An audible alarm and flashing exterior lamps will operate briefly.
X
Deactivating:
Press button : once more.
or
X
Insert the key in the starter switch.
i
USA only:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Any unauthorized modification to this device
could void the user’s authority to
operate the equipment.
>> Safety.
* optional
Z
Page 48

Driving safety systems

46
The product label with FCC ID and IC certification
number can be found in the
battery case.
i
Canada only:
This device complies with RSS‑210 of Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause interference, and
>> Safety.
2. this device must accept any interference received, including interference that may cause undesired operation of the device.
Any unauthorized modification to this device could void the user’s authority to operate the equipment.
The product label with FCC ID and IC certification number can be found in the battery case.
Driving safety systems

Introduction

WARNING
G
The following factors increase the risk of accidents:
R
Excessive speed, especially in turns
R
Wet and slippery road surfaces
R
Following another vehicle too closely
The driving safety systems described in this section cannot reduce these risks or prevent the natural laws of physics from acting on the vehicle.
Always adapt your driving style to the prevailing road and weather and traffic conditions and keep a safe distance to other road users and objects on the street.
i
In winter operation, the maximum effectiveness of the ABS, the hydraulic brake assistant, and the ESP® is only achieved with winter tires (Y page 142) or snow chains* as required.

Antilock Brake System (ABS)

WARNING
G
Do not pump the brake pedal. Use firm, steady brake pedal pressure instead. Pumping the brake pedal defeats the purpose of the ABS and significantly reduces braking effectiveness.
The Antilock Brake System (ABS) regulates
brake pressure so that the wheels do not
the lock during braking. This allows you to maintain the ability to steer your vehicle.
On slippery road surfaces, the ABS will respond even to light brake pressure.
The ABS indicator lamp in the instrument cluster (Y page 22) comes on when you switch on the ignition. It goes out when the engine is running.
Braking
At the instant one of the wheels is about to lock up, a slight pulsation can be felt in the
brake pedal, indicating that the ABS is
regulating the brake pressure.
X
Keep firm and steady pressure on the brake pedal while experiencing the pulsation.
Continuous, steady brake pedal pressure yields the advantages provided by the ABS, namely braking power and the ability to steer the vehicle.
A pulsating brake pedal can be an indication of hazardous road conditions and functions as a reminder to take extra care while driving.
Emergency brake maneuver
X
Keep continuous full pressure on the brake pedal.
WARNING
G
When the ABS is malfunctioning, the hydraulic brake assistant and the ESP® are also switched off.
* optional
Page 49
Driving safety systems
47
When the ABS is malfunctioning, the wheels may lock during hard braking, reducing steering capability and extending the braking distance.
WARNING
G
The ABS cannot prevent the natural laws of physics it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. The ABS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents. The capabilities of an ABS equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others.
from acting on the vehicle, nor can

Electronic Stability Program (ESP®)

Your vehicle is equipped with the Electronic Stability Program (ESP®). The ESP® is operational as soon as the engine is running and it monitors the vehicle’s traction (force of adhesive friction between
the tires and the road surface) and
handling.
The ESP® recognizes when a wheel is spinning or if the vehicle starts to skid. By applying brakes to the appropriate wheel and by limiting the engine output, the ESP® works to stabilize the vehicle. The ESP® is especially useful while driving off and on wet or slippery road surfaces. The ESP® also stabilizes the vehicle during braking and steering maneuvers.
The ESP® warning lamp ÷ in the instrument cluster flashes when the ESP® is
engaged.
The ESP® warning lamp ÷ in the instrument cluster comes on when you
switch on the ignition. It goes out when the engine is running.
Depending on the driving situation, the
®
ESP
R
reduces the speed
R
selectively brakes individual wheels
R
equalizes
R
stabilizes the vehicle when braking
R
assists you in evasive maneuvers on all
the speed of the driven wheels
roads
WARNING
G
If the ESP® warning lamp ÷ in the instrument cluster flashes, proceed as follows:
R
While driving off, apply as little throttle as possible.
R
While driving, ease up on the accelerator pedal.
R
Adapt your speed and driving style to the prevailing road conditions.
Failure to observe these guidelines could cause the vehicle to skid.
The ESP® cannot prevent accidents resulting from excessive speed.
WARNING
G
The ESP® physics from acting on the vehicle, nor can it increase the traction afforded. The ESP® cannot prevent accidents, including those resulting from excessive speed in turns, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents. The capabilities of an ESP equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others.
!
cannot prevent the natural laws of
®
Because the ESP® operates automatically, the engine must be turned off (ignition switched off) when the parking brake is being tested on a brake test dynamometer. Active braking action
>> Safety.
Z
Page 50

Anti-theft systems

48
through the ESP®
may otherwise seriously damage the brake system which is not covered by the smart Limited Warranty.
i
The ESP® will only function properly if you use wheels of the recommended tire size (Y page 217).

Hydraulic brake assistant

>> Safety.
The hydraulic brake assistant operates in emergency situations. If you apply the brakes very quickly, the hydraulic brake assistant automatically provides full brake boost, thereby potentially reducing the braking distance.
X
Apply continuous full braking pressure
the emergency braking situation is
until over. The ABS will prevent the wheels from locking.
When you release the brake pedal, the brakes function again as normal. The hydraulic brake assistant is then deactivated.
WARNING
G
When the hydraulic brake assistant is malfunctioning, the brake system is still functioning normally, but without the additional be provided during an emergency braking maneuver. Therefore, the braking distance may increase.
G
The hydraulic brake assistant cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking the condition of the vehicle brakes and tires or the traction afforded. The hydraulic brake assistant cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning. Only a safe, attentive, and
brake boost that would normally
WARNING
efficiency beyond that afforded by
skillful driver can prevent accidents. The capabilities equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others.
of a hydraulic brake assistant

Activating the hazard warning flasher after an emergency braking maneuver

If
you bring the vehicle to a complete stop by strongly braking at a speed of more than 43 mph (70 km/h), the hazard warning flasher comes on automatically as soon as the vehicle is at a standstill. The hazard warning flasher will remain on until it is switched off using the hazard warning flasher switch (Y page 69) or until the speed of the vehicle has exceeded 6 mph (10 km/h).
Anti-theft systems

Electronic immobilizer

The electronic immobilizer prevents unauthorized persons from starting your vehicle.
When leaving the vehicle, always take the key with you and lock the vehicle. The engine can be started by anyone with a key that is left inside the vehicle.
X
Activating: Remove the key from the starter switch.
X
Deactivating: Insert the key in the starter switch.
X
Turn the key to starter switch position 1.

Anti-theft warning system*

Once the anti-theft warning system has been armed, a visual and audible alarm is triggered when
R
someone opens a door or the tailgate
R
someone enters the vehicle’s interior
* optional
Page 51
R
there is motion inside the vehicle
R
someone attempts to raise the vehicle
The alarm will also be triggered when unlocking and opening the driver’s door with the key.
i
The alarm will stay on, even if the driver’s door is immediately closed. For canceling the alarm, see (Y page 49).
Close the windows and the tailgate before arming the alarm system. Make sure there are no moving objects inside the vehicle.
X
Arming: Lock the vehicle using the remote control. Warning system indicator lamp : flashes rapidly. The anti-theft warning system
arms after about 25 seconds. When
the anti-theft warning system is armed, warning system indicator lamp : flashes about every three seconds.
i
You
can also arm the anti-theft warning system by locking the vehicle without using the remote control (Y page 176).
X
Disarming: Unlock the vehicle using the remote control. The anti-theft warning system is disarmed. Warning system indicator lamp : stops flashing.
Anti-theft systems

Tow-away alarm* and interior motion sensor*

Once the anti-theft warning system has been armed, a visual and audible alarm is triggered when someone attempts to raise the
vehicle or if motion is detected inside
the vehicle.
X
Arming: Lock the vehicle using the remote control. The tow-away protection and the interior motion sensor are armed after about 25 seconds.
X
Disarming: Unlock the vehicle using the remote control. The
tow-away protection and the interior
motion sensor are disarmed.
Canceling the alarm
X
Insert the key in the starter switch.
X
Turn the key to starter switch position 1.
or
X
Press button # or * on the key.
Switching off tow-away protection and interior motion sensor
Switch off the tow-away protection and the interior motion sensor when locking the vehicle and
R
transporting the vehicle,
R
board, e.g. a ferry or auto train,
R
there are people or animals in the vehicle,
R
the side windows remain open.
This prevents any false alarm.
49
>> Safety.
Canceling the alarm
X
Insert the key in the starter switch.
X
Turn the key to starter switch position 1.
or
X
Press button # or * on the key.
* optional
Z
Page 52
Anti-theft systems
50
>> Safety.
X
Remove the key from the starter switch.
X
Press switch : within 60 seconds. Indicator lamp ; comes on.
X
Exit the vehicle.
X
Lock the vehicle using the remote control.
i
The tow-away protection and the interior motion sensor remain switched off until you lock your vehicle again.
Page 53
Opening and closing .......................... 52
Starter switch positions ..................... 57
Seats .............................................. 58
Mirrors ........................................... 61
Seat belts ........................................ 62
Lighting ......................................... 64
Windshield wipers ............................ 70
Soft top system (cabriolet only)
Side windows .................................... 77
Driving and parking .......................... 78
Transmission ................................... 82
Instrument cluster ............................. 86
Control system* ................................ 93
Audio system* .................................. 98
Driving systems ............................... 100
HVAC (Heating, Ventilation, Air Con-
ditioning) ...................................... 102
Loading and storing ......................... 107
Useful features ................................ 113
............ 72
>> Controls.
Page 54

Opening and closing

52
Opening and closing
Key
>> Controls.
Key with remote control
:
* Lock button
;
$ Opening the retractable soft top6/
unlocking the upper tailgate
=
# Unlock button
The remote control centrally locks and unlocks:
R
the driver’s door
R
the fuel filler flap
R
the passenger door
R
the upper tailgate
WARNING
G
When leaving the vehicle, always remove the key from the starter switch, take it with you, and lock the vehicle. Do not leave children access to an unlocked vehicle. It is possible for children to open a locked door from the inside, which could result in an accident and/or serious personal injury.
!
unattended in the vehicle, or with
To prevent possible malfunction, avoid exposing the remote control to high levels of electromagnetic radiation.
!
If you can no longer lock or unlock the vehicle with the remote control, the batteries in the remote control are
7
discharged, or the remote control is malfunctioning.
R
Check the batteries in the remote control and replace them if necessary.
R
If you do not have a spare transmitter battery at hand, use the key to open the driver’s door and the fuel filler flap.
If the remote control is malfunctioning, contact an authorized smart center.
i
USA only:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Any unauthorized modification to this device could void the user’s authority to operate the equipment.
The product label with FCC ID and IC certification number can be found in the battery case.
i
Canada only:
This device complies with RSS‑210 of Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. this device must accept any interference received, including interference that may cause undesired operation of the device.
Any unauthorized modification to this device could void the user’s authority to operate the equipment.
The product label with FCC ID and IC certification number can be found in the battery case.
6
cabriolet only.
7
coupé only.
Page 55
Opening and closing
53
!
The remote control has an operating
range
of approximately 50 ft (15 meters).
This can fluctuate greatly as a consequence of local conditions (reflective or absorbing objects) and interference emitted by other radio transmission systems. Similarly, the operating range fluctuates in line with the direction from which the remote control is activated.
To prevent theft, however, it is advisable to only unlock the vehicle when you are in close proximity to it.

Locking and unlocking from the outside

X
Selective unlocking: Press button # on the key once. All turn signal lamps flash once.
The anti-theft warning system* is disarmed.
driver’s door and the fuel filler flap
The are unlocked.
X
Global unlocking:
Press button # on the
key twice. All turn signal lamps flash once again. The passenger door and the tailgate are unlocked in addition to the driver’s door and the fuel filler flap.
X
Global locking: Press button * on the key. With the doors, the tailgate(s), and the fuel filler flap closed, the turn signal lamps flash three times.
anti-theft warning system* is armed.
The The indicator lamp on the central
locking switch flashes (Y page 54).
The interior and exterior8 lamps come on and then go out again after 12 seconds.
When unlocking, the acoustic signal sounds once. When locking, the acoustic signal sounds three times.
The acoustic signal is activated at the factory. If you wish to deactivate the feature, contact an authorized smart center.

Automatic locking

Auto-relock function
The vehicle will lock again automatically within approximately 60 seconds of unlocking with the key if neither the driver’s nor passenger door is opened.
!
To prevent an inadvertent lockout,
never
leave your key lying in the vehicle.
Drive lock function
The vehicle locks automatically when the ignition is switched on and the wheels are turning at vehicle speeds of approximately 8 mph (14 km/h) or more. The drive lock function is enabled at the factory.
X
Switching on: Switch off the ignition.
X
Press the central locking switch (Y page 54) and button * on the key simultaneously. An acoustic signal sounds.
The drive lock function is switched on.
X
Switching off: Switch off the ignition.
X
Press the central unlocking switch (Y page 54) and button # on the key simultaneously. An acoustic signal sounds.
The drive lock function is switched off.
>> Controls.
i
In vehicles with anti-theft warning system*, an acoustic signal will sound when locking or unlocking the vehicle.
8
Vehicles with rain-light sensor* only.
* optional
Z
Page 56
Opening and closing
54

Locking and unlocking from the inside

WARNING
G
When leaving the vehicle, always remove the key from the starter switch, take it with you, and lock the vehicle. Do not leave children access to an unlocked vehicle. A child’s unsupervised access to a vehicle could result in an accident and/or serious personal injury.
unattended in the vehicle, or with
You can lock and unlock the vehicle from inside using the central locking or
>> Controls.
unlocking switch. This can be useful, for example, if you want to unlock the passenger door from inside or lock the vehicle before starting to drive.
X
Locking: Press central locking switch :. The indicator lamp on central locking switch : comes on, when the starter switch is in position 1.
The indicator lamp on central locking switch : flashes, when the starter switch is in position 0.
With the doors and the tailgate closed, the vehicle locks.
X
Unlocking: Press central unlocking switch ;. The vehicle unlocks and the indicator lamp on central locking switch : goes out.

Opening the doors from the inside

You
can open a locked door from the inside. Open door only when conditions are safe to do so.
X
Pull on inside door handle :. With the driver’s door open a warning signal sounds if the exterior lamps are switched
on and the ignition is switched
off.

Opening the upper tailgate on the coupé

WARNING
G
Make sure the tailgate is closed when the engine is running and while driving. Among other dangers, deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death.
Page 57
Opening and closing
55
X
Press button # on the key twice.
X
Press and hold button $ on the key for approximately two seconds.
or
X
Pull the release handle in handle recess : of the lower tailgate. The upper tailgate is unlocked.
X
Swivel the upper tailgate upwards to open.
Observe the information on loading the vehicle (Y page 112).
For information on vehicle weights, see “Vehicle specification” (Y page 215).

Opening the lower tailgate on the coupé

WARNING
G
High outside temperature, stop-and-go traffic, driving on long uphill grades, or driving at high engine speed may increase the temperature in the engine compartment. Therefore the area around the air slots in the rear apron may be hot. Let the engine cool off before touching this area to prevent burns.
X
Pull either of the release levers : backwards. The lower tailgate is unlocked.
X
Swivel the lower tailgate downwards to open. The lower tailgate is held in the horizontal position by means of the two retaining straps.
!
When folded down, the lower tailgate can bear loads up to maximum of 220 lbs (100 kg).
Observe the information on loading the vehicle (Y page 112).
For information on vehicle weights, see “Vehicle specification” (Y page 215).

Closing the tailgate(s) on the coupé

WARNING
G
To prevent possible personal injury,
keep hands and fingers away from the
always cargo compartment opening when closing the tailgate(s). Be especially careful when small children are around.
>> Controls.
X
Open the upper tailgate (Y page 54).
X
Swivel the lower tailgate upwards to close. Allow the two release levers to engage audibly.
X
Swivel the upper tailgate downwards to close.
WARNING
G
When leaving the vehicle, always remove the key from the starter switch, take it with
Z
Page 58
Opening and closing
56
you, and lock the vehicle. Do not leave children access to an unlocked vehicle. A child’s unsupervised access to a vehicle could result in an accident and/or serious personal injury.
unattended in the vehicle, or with

Opening and closing the retractable soft top (cabriolet only)

You can fully open the retractable soft top with the key.
>> Controls.
Key with remote control
:
* Lock button
;
$ Opening the retractable soft top
=
# Unlock button
X
Opening: Press button $ on the key for approximately two seconds. The retractable soft top opens.
vehicle’s retractable soft top inadvertently.

Opening the tailgate on the cabriolet

WARNING
G
Make sure the tailgate is closed when the engine is running and while driving. Among other dangers, deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death.
WARNING
G
High outside temperature, stop-and-go traffic, driving on long uphill grades, or driving the temperature in the engine compartment. Therefore the area around the air slots in the rear apron may be hot. Let the engine cool off before touching this area to prevent burns.
at high engine speed may increase
i
Pressing symbols #, * or $ on the
key with remote control while opening the retractable soft top will interrupt the opening procedure.
X
Closing: Press symbol G on the retractable soft top switch
WARNING
G
When closing the retractable soft top, make sure there is no danger of anyone being harmed by the closing procedure.
i
The remote control has an operating
of approximately 50 ft (15 meters).
range
(Y page 56).
Take care that you do not open your
X
Press button # on the key twice.
X
Pull the release handle in handle recess : of the tailgate. The tailgate is unlocked.
X
Swivel the tailgate downwards to open.

Opening and closing the rear soft top (cabriolet only)

You can open the rear soft top to ease loading and unloading.
Page 59
X
Opening:
Push release levers :, located
to the left and right of the retaining clip, upwards.
X
Swivel the rear soft top upwards to open.
WARNING
G
To prevent possible personal injury,
keep hands and fingers away from the
always cargo compartment opening when closing the rear soft top. Be especially careful when small children are around.
X
Closing: Swivel the rear soft top downwards to close.
X
Pull soft top down.
X
Pull release levers :,
located to the left and right of the retaining clip, downwards.
X
Make sure the rear soft top is correctly locked in place on both sides.

Starter switch positions

X
Swivel the tailgate upwards to close. Let the tailgate lock into place.
WARNING
G
When leaving the vehicle, always remove the key from the starter switch, take it with you, and lock the vehicle. Do not leave children access to an unlocked vehicle. A child’s unsupervised access to a vehicle could result in an accident and/or serious personal injury.
Starter switch positions
Starter switch
unattended in the vehicle, or with
57
>> Controls.

Closing the tailgate on the cabriolet

WARNING
G
To prevent possible personal injury,
keep hands and fingers away from the
always cargo compartment opening when closing the tailgate. Be especially careful when small children are around.
!
When closing the tailgate, you must first close the rear soft top. Otherwise you might break the release levers of the rear soft top.
Z
Page 60

Seats

58
g
For removing key
1
Ignition (power supply for all electrical consumers) and driving position
All lamps (except low‑beam headlamp indicator lamp, high‑beam headlamp indicator lamp, and turn signal indicator lamps unless activated) in the instrument cluster come on. If a
in the instrument cluster fails
lamp to come on when the ignition is
>> Controls.
switched on, have it checked and replaced if necessary. If a lamp in the instrument cluster remains on after starting the engine or comes on while driving, refer to “Warning and indicator lamps in the instrument cluster” (Y page 162).
2
Starting (Y page 78)
i
When you switch on the ignition, the indicator and warning lamps (except low‑beam headlamp indicator lamp, high‑beam
headlamp indicator lamp, and turn signal indicator lamps unless activated) in the instrument cluster come on. The indicator and warning lamps (except low‑beam headlamp indicator lamp, high‑beam headlamp indicator lamp, and turn signal indicator lamps if activated) will go out when the engine is running. This indicates that the respective systems are operational.
Seats

Safety notes

WARNING
G
All seat adjustments, as well as fastening of seat belts, must be done before the vehicle is operated.
WARNING
G
When adjusting the seat, make sure no one becomes trapped.
Do not adjust the driver’s seat while driving. Adjusting the seat while driving
cause the driver to lose control of the
could vehicle.
Never ride in a moving vehicle with the seat backrest in an excessively reclined position as this can be dangerous. You could slide under the seat belt in a collision. If you slide under the seat belt, it could apply force at the abdomen or neck, potentially causing serious or fatal injuries. The seat backrest and seat belts provide the best restraint when the wearer is in a position that is as upright as possible and seat belts are properly positioned on the body.
Your seat must be adjusted so that you can correctly fasten your seat belt.
Observe the following points:
R
Adjust the seat backrest until your arms are slightly angled when holding the steering wheel.
R
Adjust the seat to a comfortable seating position that still allows you to reach the accelerator/brake pedal safely. The position should be as far back as possible with the driver still able to operate the controls properly.
R
Never place hands under the seat or near any moving parts while a seat is being adjusted.
Failure to do so could result in an accident and/or serious personal injury.
Observe the notes on the air bag system.
WARNING
G
Children 12 years old and under must be seated and properly secured in an appropriately sized infant restraint, toddler restraint, or booster seat recommended
for the size and weight of the
Page 61
Seats
59
child. For additional information, see “Children in the vehicle”.
A child’s risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/or the child is not properly secured in the child restraint.
WARNING
G
Contact an authorized smart center if the seats have become damaged.
seat is an integral part of the vehicle’s
The safety system in the same way as seat belts and air bags. Damage to the seats may reduce their ability to protect the occupants in an accident.

Seat adjustment

Seat fore and aft adjustment
X
Pull adjustment handle ; upwards and slide the seat to a seating position that
allows you to reach the accelerator/
still brake pedal safely.
X
Release adjustment handle ; when the desired seating position is reached. When you hear an audible click, the seat is again fixed into place.
X
Check for proper engagement before driving.
Seat height
The seat guide is inclined in the horizontal plane. Seat fore and aft adjustment also alters the seat height.
Armrest* on driver’s seat
>> Controls.
:
Seat backrest tilt
;
Seat fore and aft adjustment
Seat backrest tilt
X
Pull adjustment lever : upwards and adjust the seat backrest until your arms are slightly angled when holding the steering wheel.
X
Release adjustment lever : when the desired seat backrest tilt is reached. When you hear an audible click, the seat backrest is again fixed into place.
X
Check for proper engagement before driving.
* optional
Folding up and down
X
Folding up:
Hold front of armrest and fold
it up in direction of arrow :.
X
Folding down: Hold front of armrest and fold it down in direction of arrow ;.
Adjusting armrest angle
You
can adjust the angle of the armrest when
it is folded down.
X
Turn thumb wheel =.
R
Direction of arrow ?: down
R
Direction of arrow A: up
Z
Page 62
Seats
60

Passenger seat

You can expand the cargo compartment by folding down the passenger seat.
Observe the loading instructions (Y page 112).
Folding down
>> Controls.
X
Remove the seat belt from seat belt guide :.
X
Move the passenger seat backward as far as it will go.
X
Check for proper engagement before driving.
X
Place the seat belt back in seat belt guide :.
WARNING
G
When folding the passenger seat backrest back to its upright position, please make sure
R
nobody becomes trapped
R
no obstacles are jammed in the lock
R
the adjustment lever has audibly locked into position
A properly engaged passenger seat backrest will help to prevent stored objects in the cargo compartment from being thrown about and injuring vehicle occupants during
R
braking
R
vehicle maneuvers
R
an accident
X
Hold the backrest with one hand back.
X
Pull adjustment lever ; upwards and unlock the seat backrest.
X
Fold the seat backrest forward.
Folding back
X
Pull adjustment lever ; upwards and unlock the seat backrest.
X
Fold the seat backrest backward. When you hear an audible click, the seat backrest is again fixed into place.

Seat heating*

The seat heating allows you to heat the driver’s and passenger seat electrically.
The seat heating has two levels. The indicator lamps on seat heating
switch : come on to show which heating level you have selected.
* optional
Page 63

Mirrors

61
Level Indicator lamps on the switch
off
1
2
X
Make sure the key is in starter switch
No indicator lamp on
One indicator lamp on
Two indicator lamps on
position 1.
X
Switching on: Press seat heating switch : repeatedly until the desired seat heating level is reached.
X
Switching off: Press seat heating switch :
repeatedly until all indicator
lamps go out.
!
If the seat heating is malfunctioning, the indicator lamp(s) on the switch come(s) on briefly when you press the switch
and then go(es) out again. Contact
an authorized smart center.
Mirrors
Adjust the interior and exterior rear view mirrors before driving so that you have a good view of the road and traffic conditions.
Manually adjustable exterior rear view mirrors
X
Adjusting: Move adjustment lever : up, down, left, or right to the desired setting.
Power exterior rear view mirrors
This feature is only available on the model passion and BRABUS.
The operating control is on the door control panel.
>> Controls.

Exterior rear view mirrors

WARNING
G
Exercise care when using the passenger-
exterior rear view mirror. The mirror
side surface is convex (outwardly curved surface for a wider field of view). Objects in mirror are closer than they appear. Check your interior rear view mirror and glance over your shoulder to determine whether any vehicles are in the ’blind spot’ of your field of vision, before changing lanes.
X
Make sure the key is in starter switch position 1.
X
Selecting the mirror:
Turn knob : to the
left for the driver’s side exterior rear view mirror or to the right for the passenger side exterior rear view mirror.
X
Adjusting the mirror: Move adjustment button ; up, down, left, or right to the desired setting.
Z
Page 64
62

Seat belts

Exterior rear view mirror heating
This feature is only available on the model passion and BRABUS and in conjunction with power exterior rear view mirrors.
After switching on the rear window defroster, the exterior rear view mirrors will be heated automatically. This prevents icing up the exterior rear view mirrors
and also creates a clear view when the exterior rear view mirrors have fogged up.
If the rear window defroster is automatically deactivated after
>> Controls.
approximately 10 minutes of operation, the exterior rear view mirror heating also deactivates.
X
Make sure the key is in starter switch position 1.
X
Switching on: Switch on the rear window defroster (Y page 106).
exterior rear view mirror heating is
The switched on.
X
Switching off:
Switch off the rear window defroster (Y page 106). The exterior rear view mirror heating is switched off.
i
The exterior rear view mirror heating also switches off if the key is turned to starter switch position 0.

Interior rear view mirror

X
Adjusting the mirror: Manually move the interior
rear view mirror up, down, left,
or right to the desired setting.
X
Selecting the antiglare position: Tilt the interior rear view mirror to the antiglare position by moving lever : forward or backward.
Seat belts

Fastening the seat belts

WARNING
G
Always fasten your seat belt before driving. Always make sure all of your passengers are properly restrained.
Failure to wear and properly fasten and position your seat belt greatly increases your risk of injuries and their likely severity in an accident. You and your passenger should always wear seat belts.
If you are ever in an accident, your injuries can be considerably more severe without your seat belt properly buckled.
Without your seat belt buckled, you are much more likely to hit the interior of the vehicle or be ejected from it. You can be seriously injured or killed.
In the same crash, the possibility of injury or death is lessened if you are properly wearing your seat belt. Air bags can only protect you if you are properly wearing your seat belt.
WARNING
G
Children 12 years old and under must be seated and properly secured in an appropriately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. For additional information, see “Children in the vehicle”.
A child’s risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the
Page 65
vehicle and/or the child is not properly secured in the child restraint.
WARNING
G
Never let more people ride in the vehicle than there are seat belts available. Make sure everyone riding in the vehicle is correctly restrained with a separate seat
Never use a seat belt for more than one
belt. person at a time.
WARNING
G
Never ride in a moving vehicle with the seat backrest in an excessively reclined position as this can be dangerous. You could slide under the seat belt in a collision. If you slide under it, the belt would apply force at the abdomen or neck, causing seat backrest and seat belt provide the best restraint when the wearer is in a position that is as upright as possible and the belt is properly positioned on the body.
G
Observe ”Safety notes“ (Y page 35).
serious or even fatal injuries. The
WARNING
Seat belts
:
Seat belt outlet
;
Seat belt guide
=
Latch plate
?
Seat belt buckle
A
Release button
X
Fastening the seat belt: With a smooth motion, outlet :.
X
Place the shoulder portion of the seat belt across the top of your shoulder and the lap portion across your hips.
X
Push latch plate = into seat belt buckle ? until it clicks.
X
If necessary, tighten the lap portion of the seat belt to a snug fit by pulling shoulder portion up.
X
Unfastening the seat belt: Press release button A.
X
Allow the retractor to completely rewind the seat belt by guiding latch plate =.
pull the seat belt out of seat belt
63
>> Controls.
Proper use of seat belts
R
not twist the seat belt when fastening.
Do
R
Adjust the seat belt so that the shoulder portion is located as close as possible to the middle of the shoulder (it should
Z
Page 66

Lighting

64
not touch the neck). Never pass the shoulder portion of the seat belt under your arm.
R
Position the lap belt as low as possible on your hips (over hip joint) and not across the abdomen.
R
the seat backrest in a position that
Place is as upright as possible.
R
Never use a seat belt for more than one person at a time.
R
Do not fasten a seat belt around a person and another object at the same time. When using a seat belt to secure infant or
>> Controls.
toddler restraints or children in booster seats, always follow the child seat manufacturer’s instructions.
R
Check your seat belt during travel to make sure it is properly positioned.
R
Make sure the seat belt is always fitted snugly. Take special care to maintain a snug fit when wearing loose clothing.
WARNING
G
Do not pass seat belts over sharp edges. They could tear.
Do not allow the seat belt to get caught in the door or in the seat adjustment mechanism. This could damage the seat belt.
Never attempt to make modifications to seat belts. This could impair the effectiveness of the seat belts.
Do not bleach or dye seat belts as this may severely weaken them. In a crash they may
be able to provide adequate protection.
not
Damaged seat belts or seat belts that were highly stressed in an accident must be replaced. Contact an authorized smart center.

Correct driver seat adjustment

WARNING
G
Observe ”Safety notes“ (Y page 58).
X
Adjust the driver’s seat properly (Y page 59).
Make sure that you
R
are positioned as far away from the driver’s front air bag as possible
R
can reach steering wheel : with your arms slightly bent at the elbows
R
can fasten seat belt ; properly
R
you have adjusted seat backrest = to a position that is as upright as possible
R
you can move your legs freely
R
you can depress the brake and accelerator pedal safely.
X
Make sure the seat belt is fastened properly (Y page 62).
Lighting

Exterior lamp switch

For safety, smart recommends that you drive with your low‑beam headlamps on during
the day. In certain countries, local laws dictate that low‑beam headlamps are switched on automatically during operation of the vehicle.
Page 67
Lighting
65
i
If you drive in countries where vehicles drive on the other side of the road than the country in which the vehicle is registered, you must have the headlamps
modified for symmetrical low beams. Relevant information can be obtained at any authorized smart center.
Exterior lamp switch (USA only)
$
Lamps off
Daytime running lamp mode*
T
Parking lamps
L
Low‑beam headlamps or high‑beam headlamps
Ã
Automatic headlamp mode*
Parking lamps
You can switch on and off the parking lamps with the exterior lamp switch using the manual headlamp mode.
X
Switching on: Turn the exterior lamp switch to position T. The parking lamps come on.
The following lamps also come on:
R
Tail lamps
R
License plate lamps
R
Side marker lamps
Low‑beam headlamps
You can switch on and off the low‑beam headlamps with the exterior lamp switch using the manual headlamp mode.
X
Switching on: Turn the exterior lamp switch to position L. The low‑beam headlamps come on.
The low‑beam headlamp indicator lamp M in the instrument cluster comes on.
The following lamps also come on:
R
Tail and parking lamps
R
License plate lamps
R
Side marker lamps
>> Controls.
Exterior lamp switch (Canada only)
$
Lamps off Daytime running lamp mode
T
Parking lamps
L
Low‑beam headlamps or high‑beam headlamps
* optional
Automatic headlamp mode (USA only)
This feature is only available on vehicles with rain-light sensor*.
The following lamps come on and go out automatically
depending on the brightness
of the ambient light:
R
Low‑beam headlamps
R
Tail and parking lamps
R
License plate lamps
R
Side marker lamps
WARNING
G
If the exterior lamp switch is set to position Ã, the headlamps will not be automatically switched on under foggy conditions.
Z
Page 68
66
Lighting
To minimize risk to you and to others, activate headlamps by turning exterior
switch to position L when driving
lamp or when traffic and/or ambient lighting conditions require you to do so.
In low ambient lighting conditions, only switch from position à to L with the vehicle at a standstill in a safe location. Switching from position à to L will briefly switch off the headlamps. Doing so while driving in low ambient lighting conditions may result in an accident.
The automatic headlamp feature is only an
>> Controls.
aid to the driver. The driver is responsible for the operation of the vehicle’s lights at all times.
X
Turn the exterior lamp switch to position Ã. With the key in starter switch position 1,
the tail and parking lamps, the license plate lamps, and the side marker lamps will come on and go out automatically depending on the brightness of the ambient light.
With the engine running, the low‑beam headlamps, the tail and parking lamps, the license plate lamps and the side marker lamps will come on and go out automatically depending on the brightness of the ambient light.
Daytime running lamp mode (Canada only)
In Canada, the daytime running lamp mode is mandatory and therefore in a constant mode.
X
Turn the exterior lamp switch to position $.
i
With the engine running, the low‑beam headlamps cannot be switched off manually.
You cannot switch on the high‑beam headlamps.
The high‑beam flasher is available at all times.
For nighttime driving you should turn the exterior lamp switch to position L to permit activation of the high‑beam headlamps.
When the engine is running, and you
R
the exterior lamp switch to position
turn T, the low‑beam headlamps, the tail and parking lamps, the license plate lamps and the side marker lamps come on
R
turn the exterior lamp switch to position L, the manual headlamp mode has priority over the daytime running lamp mode.
The corresponding exterior lamps come on (Y page 65).
Daytime running lamp mode* (USA only)
In the USA, the daytime running lamp mode is deactivated by default.
X
Activating: Switch off the ignition.
X
Switch on the high-beam flasher and press button * on the key simultaneously. An acoustic signal sounds.
The daytime running lamp mode is activated.
X
Turn the exterior lamp switch to position $.
i
With the engine running, the low‑beam headlamps cannot be switched off manually.
i
the daytime running lamp mode is
When activated, the rain-light sensor* is without function.
When the engine is running, and you turn the exterior lamp switch to position T or L, the manual headlamp mode has priority over the daytime running lamp mode.
The corresponding exterior lamps come on (Y page 64).
* optional
Page 69
X
Deactivating: Switch off the ignition and remove the key from the starter switch.
X
Switch on the high-beam flasher and press button # on the key simultaneously. An acoustic signal sounds.
The daytime running lamp mode is deactivated.
LED daytime running lamps* (USA only)
Vehicles without rain-light sensor:
X
Switching on: Switch on the ignition. The LED daytime running lamps are switched on.
X
Switching off: Switch on the parking lamps or the low‑beam headlamps. The LED daytime running lamps are switched off.
Vehicles with rain-light sensor*:
X
Turn the exterior lamp switch to position Ã. With the key in starter switch position 1, the LED daytime running lamps are switched on. In low ambient light conditions, low-beam headlamps, the
and parking lamps, the license plate
tail lamps and the side marker lamps will come on. The LED daytime running lamps will then be switched off.
With the engine running, the low‑beam headlamps, the tail and parking lamps, the license plate lamps and the side marker lamps will come on and go out automatically depending on the brightness of the ambient light.
When the engine is running, and you turn the exterior lamp switch to position T or L, the manual headlamp mode has priority
over the LED daytime running lamp
mode. The corresponding exterior lamps come on
(Y page 64).
Lighting
LED daytime running lamps* (Canada only)
X
Switching on: Switch on the ignition. The LED daytime running lamps are switched on.
X
Switching off: Switch on the low‑beam headlamps. The LED daytime running lamps are switched off.

Combination switch (high beam, high beam flasher and turn signals)

X
Make sure the key is in starter switch position 1.
High‑beam headlamps and high-beam flasher
X
Make sure the low‑beam headlamps are switched on (Y page 65).
X
Switching on: Push the combination switch to position 1. The high‑beam headlamps come on.
high‑beam headlamp indicator lamp
The K in the instrument cluster comes on.
X
Switching off: Pull the combination switch in direction of arrow ; to its original position. The high‑beam headlamps go out.
The
high‑beam headlamp indicator lamp
K in the instrument cluster goes out.
X
High-beam flasher: switch briefly in direction of arrow ;.
Pull the combination
67
>> Controls.
* optional
Z
Page 70
68
Lighting
Turn signals
:
Turn signals, right
>> Controls.
;
Turn signals, left
X
Switching on: Push the combination switch in direction of arrow : or ;. The corresponding turn signals flash.
corresponding turn signal indicator
The lamp # or ! in the instrument cluster flashes.
The combination switch resets automatically after major steering wheel movement.
i
To signal minor directional changes such as changing lanes, push the combination switch only to the point of resistance and release. The corresponding turn signals will flash three times.
When leaving the vehicle
X
Remove the key from the starter switch.
X
Exit the vehicle.
X
Press button * on the key. The vehicle is locked.
interior and exterior9 lamps come on
The and then go out again after 12 seconds.
When returning to the vehicle
X
Press button #
on the key either once or twice. The vehicle is either selectively or globally unlocked.
The interior and exterior9 lamps come on and then go out again after 12 seconds.

Front fog lamps

WARNING
G
Vehicles with rain-light sensor*:
In low ambient lighting or foggy conditions, only switch from position à to L with the vehicle at a standstill in a safe location. Switching from à to L will briefly switch off the headlamps. Doing so while driving in
ambient lighting conditions may result
low in an accident.

Coming home function

Vehicles without rain-light sensor: The
interior lamps come on and then go out
after 12 seconds every time when you
again lock or unlock the vehicle.
Vehicles with rain-light sensor*: In addition to the interior lamps, the exterior lamps come on and then go out again after 12 seconds depending on the brightness of the ambient light when you lock or unlock the vehicle.
9
Vehicles with rain-light sensor*.
i
Fog lamps will operate with the parking lamps and/or the low‑beam headlamps on. Fog lamps should only be used in conjunction with low‑beam headlamps. Consult your State or Province Motor Vehicle Regulations regarding permissible lamp operation.
i
Vehicle with rain-light sensor*: Fog lamps cannot be switched on manually
with the exterior lamp switch in position Ã. To switch on the fog lamps, turn the exterior lamp switch to position L first.
* optional
Page 71
X
Make sure the parking lamps or the low‑beam headlamps are switched on.
X
Switching on: Press switch :. The front fog lamps come on.
The indicator lamp in the switch comes on.
X
Switching off: Press switch : once more. The front fog lamps go out.
The indicator lamp in the switch goes out.
Lighting

Interior lighting

The
interior lamp comes on for a period of time when you open the doors, or lock or unlock the vehicle with the key.
It goes out
R
immediately after switching off the ignition with all doors closed
R
after 30 seconds if the doors are not opened
R
after 15 seconds if all doors are closed
R
after 10 minutes if at least one door is open
The rocker switch can be set to three different positions.
69
>> Controls.

Hazard warning flasher

The
hazard warning flasher can be switched on at all times, even with the key removed from the starter switch.
X
Switching on: Press hazard warning flasher switch :. All turn signal lamps are flashing.
X
Switching off: Press hazard warning flasher switch : once more.
:
Interior lamp
;
Off
=
Switching on the automatic control
?
Continuous operation
Automatic control
X
Set the rocker switch to position =. The interior lamp comes on for a period of time.
Switching off
X
Set the rocker switch to position ;. The interior lamp is permanently switched off.
Z
Page 72

Windshield wipers

70
Continuous operation
X
Set the rocker switch to position ?. The interior lamp is permanently switched on.
!
leaving the vehicle, make sure the
When interior lamp is not set to continuous operation and none of the doors is left open for a long period of time.
Doing otherwise could result in a discharged battery.
Ambient lighting*
>> Controls.
The ambient lighting illuminates the vehicle interior with 6 LEDs when the low­beam headlamps are switched on. The LEDs can be dimmed.
The LEDS are located
R
in the overhead control panel
R
in the door pockets, driver’s and passenger side
R
in the storage trays to the left and right of the steering wheel
R
in the storage compartment, passenger side
In addition to the ambient lighting, the footwells on the driver’s and passenger side are also illuminated by separate lamps.
i
When you open a door, the interior lighting comes on and the brightness of lamps in the footwells increases.
X
Make sure the key is in starter switch position 1.
X
Switch on the low-beam headlamps.
X
To brighten or dim ambient lighting:
Press button : repeatedly until the desired setting is reached. The current setting is stored.
i
When adjusting the ambient lighting, the illumination level for instrument cluster is also changed (Y page 92).
Windshield wipers

Switching windshield wipers on and off

Example illustration coupé
X
Make sure the key is in starter switch position 1.
X
Switching on: Turn the wiper switch to position 2 or 3, depending on the intensity of the rain.
!
Do not operate the windshield wipers when the windshield is dry. Dust that accumulates on a windshield might scratch the glass and/or damage the
blades when wiping occurs on a dry
wiper windshield. If it is necessary to operate the windshield wipers in dry weather conditions, always operate the windshield wipers with windshield washer fluid.
!
If anything blocks the windshield wipers (leaves, snow, etc.), switch them off immediately.
* optional
Page 73
For safety reasons, stop the vehicle in a safe location and
R
-
remove the key from the starter switch
-
engage the parking brake
before attempting to remove any blockage.
R
Remove blockage.
R
Turn the windshield wipers on again.
X
Switching off: Turn the wiper switch to position g.

Intermittent wiping

Only switch on intermittent wiping under wet weather conditions or in the presence of precipitation.
Vehicles
with rain-light sensor*: When you select intermittent wiping, the sensor is activated. The sensor automatically sets a suitable wiping interval depending on the wetness of the sensor surface.
!
Vehicles with rain-light sensor*:
Do not leave windshield wipers in intermittent setting when the vehicle is taken to an automatic car wash or during windshield cleaning. Windshield wipers will operate in the presence of water sprayed on the windshield, and windshield wipers may be damaged as a result.
!
Vehicles with rain-light sensor*:
If you have set intermittent wiping, dirt on the surface of the sensor or optical effects may cause the windshield wipers to wipe in an undesired fashion. This could then damage the windshield wiper blades or scratch the windshield. You should therefore switch off the windshield wipers when weather conditions are dry.
Windshield wipers
X
Make sure the key is in starter switch position 1.
X
Activating intermittent wiping: wiper switch to position 1.
After the initial wipe, pauses between wipes are automatically controlled depending on the vehicle speed and by the rain-light sensor*.
X
Deactivating intermittent wiping: Turn the wiper switch to position g.

Wiping with windshield washer fluid

Example illustration coupé
X
Pull the wiper switch in direction of arrow : and hold it in position. The windshield wipers operate with windshield washer fluid.
X
Release the wiper switch. The windshield wipers will wipe three more times.
i
prevent smears on the windshield, or
To noisy/chattering wiper blades, wipe with windshield washer fluid periodically even when it is raining.
Single wipe
X
Pull the wiper switch briefly in direction of arrow :. The windshield wipers wipe one time with windshield washer fluid.
Turn the
71
>> Controls.
* optional
Z
Page 74

Soft top system (cabriolet only)

72

Rear window wiper/washer (coupé only)

X
Make sure the key is in starter switch
>> Controls.
position 1.
X
Activating intermittent wiping: wiper switch to position 1.
X
Wiping with windshield washer fluid:
Push the wiper switch in direction of arrow ; and hold in position until the rear window is clean.
X
Release the wiper switch. The rear window wiper will wipe three more times.
Intermittent wiping is still activated.
X
Deactivating intermittent wiping: Pull the wiper switch back to start position.
i
The rear window wiper wipes one time when reverse gear R is engaged with the windshield wipers switched on.
Soft top system (cabriolet only)

Introduction

The soft top system of the smart cabriolet consists of a
R
retractable soft top
R
rear soft top
R
side rails
can remove the side rails over the doors
You when you open the retractable soft top and open the rear soft top.
Push the
i
Opening the rear soft top is possible after the retractable soft top has been opened completely.

Notes on the soft top system

!
When transporting long objects inside the vehicle, make sure they do not press against the retractable soft top when it is closed.
carrying objects that protrude from
When the rear of the vehicle, make sure they are not resting on the retaining clips.
When loading, make sure no sharp objects come into contact with the soft top or the rear window.
Do not place any evenly distributed loads with a weight of more than 165 lbs (75 kg) on the rear soft top when folded down.
Make sure the high-mounted brake lamp is not concealed.
!
Do not block the soft top system’s locking apertures.
Only place the side rails in the designated storage space of the tailgate.
!
Do not sit on the folded-down rear soft top.
Do not fold down the rear soft top at temperatures below 14¦ (-10¥).
Do not place any pointed, sharp-edged, hot (above 176¦ [80¥]), incandescent or burning objects on the soft top’s lining.
Do not apply wax to the soft top fabric and select only wax-free washing products when using an automatic car wash.
Only drive with the retaining clips closed, as exhaust fumes could otherwise reach the vehicle’s interior.
!
Please keep in mind that weather conditions can sometimes change rapidly. Make sure to close the retractable soft top and the rear soft top when leaving the vehicle. If water enters the vehicle interior, vehicle
Page 75
Soft top system (cabriolet only)
73
electronics could be damaged which is not covered by the smart Limited Warranty.

Opening and closing the retractable soft top

You
can open and close the retractable soft top when the vehicle is either stationary or in motion.
WARNING
G
Never operate the retractable soft top if there is the possibility of anyone being harmed by the opening or closing procedure.
WARNING
G
The retractable soft top is made out of fabric. In the event of an accident, the fabric may tear. This may result in an opening in the roof.
In a vehicle rollover, occupants not wearing their seat belts or not wearing them properly may be thrown out of the opening. Such an opening also presents a potential their seat belts properly as entire body parts or portions of them may protrude from the passenger compartment.
G
When leaving the vehicle, always remove the key from the starter switch, take it with you, and lock the vehicle. Do not leave children access to an unlocked vehicle. A child’s unsupervised access to a vehicle could result in an accident and/or serious personal injury.
for injury for occupants wearing
WARNING
unattended in the vehicle, or with
Do not open the retractable soft top if there is snow or ice on the roof, as this could result in malfunctions.
If you cannot open or close the retractable
soft top due to a malfunction contact Roadside Assistance or an authorized smart center.
i
To avoid draining the battery, leave the engine running when opening and closing the retractable soft top.
Opening from outside
You can open the retractable soft top completely with the key.
Key with remote control
:
* Lock button
;
$ Opening the retractable soft top
=
# Unlock button
X
Press button $ on the key for approximately two seconds. The retractable soft top opens completely.
>> Controls.
!
To avoid damaging the seals, do not transport any objects with sharp edges which can stick out of the retractable soft top.
Z
Page 76
Soft top system (cabriolet only)
74
Opening from the inside
X
Make sure the key is in starter switch
>> Controls.
position 1.
X
Press symbol ; on the retractable soft top switch until the desired position is reached or the retractable soft top is opened completely.
or
X
Press symbol ; on the retractable soft top switch briefly. The retractable soft top opens completely.
i
Pressing symbol : or ; on the
retractable soft top switch while opening the retractable soft top will interrupt the opening procedure.
Closing
For safety reasons, you can only close the retractable soft top using the retractable soft top switch inside the vehicle.
X
Make sure the key is in starter switch position 1.
X
Press symbol : on the retractable soft top switch until the retractable soft top is closed.

Opening and closing the rear soft top

You can open and close the rear soft top
the vehicle is either stationary or in
when motion.
WARNING
G
Never operate the rear soft top if there is the possibility of anyone being harmed by the opening or closing procedure.
!
Make sure objects are not stacked too high in the cargo compartment. They could get damaged when opening or closing the rear soft top.
!
When the rear soft top is folded down,
side rails are accessible. To prevent
the theft, you should remove the side rails and store them in the storage compartment of the tailgate or close the soft top system.
X
Make sure the key is in starter switch position 1.
Retractable soft top switch
:
Closing
;
Opening
Opening the rear soft top
X
Press symbol ; on the retractable soft top switch or button $ on the key until the retractable soft top has opened completely.
X
Release retractable soft top switch ; button $ on the key.
X
Press symbol ; on the retractable soft top switch once more until the rear soft top has folded down completely.
or
Page 77
Soft top system (cabriolet only)
75
Closing the rear soft top
X
Press symbol : on the retractable soft top switch until the rear soft top has folded up completely.
X
Release retractable soft top switch :.
i
If you release the retractable soft top
while driving before the rear soft
switch top has closed completely, the rear soft top will fold down again.

Removing the side rails

X
Open the retractable soft top (Y page 56).
X
Open the rear soft top (Y page 74).
X
Open the driver’s and passenger door when conditions are safe to do so.
X
Open the tailgate (Y page 56).
X
Push release lever = of side rail ; backward.
rail ; can be lifted at the rear end,
Side but remains secured.
X
Push release lever = backward again.
X
Carry out the following steps when conditions are safe to do so.
X
First lift the side rail at the rear end in direction of arrows ?.
X
Then remove it in direction of arrows A.

Storing the side rails

>> Controls.
X
Pull handle : on the inside of the tailgate backward.
X
Lift up the storage compartment cover.
:
Front right
;
Rear right
=
Rear left
?
Front left
X
Store the side rails in the storage compartment of the tailgate with the painted side facing down in the designated order : to ?.
Z
Page 78
Soft top system (cabriolet only)
76
:
Front right
;
Rear right
>> Controls.
=
Rear left
?
Front left
X
Close the storage compartment cover.
X
Press on the “PRESS” marking in the middle
of the storage compartment cover
until it engages audibly.
WARNING
G
Always close the storage compartment cover properly when storing the side rails. Otherwise occupants could be injured by the side rails moving about during
R
braking
R
vehicle maneuvers
R
an accident
X
Close the tailgate. Let the tailgate lock into place.
X
Close the driver’s and passenger door.
X
Open the side windows if desired.
!
Make sure the storage compartment cover is closed before closing the tailgate. Otherwise the tailgate could jam.

Mounting the side rails

X
Open the driver’s and passenger door when conditions are safe to do so.
X
Open the tailgate.
X
Pull handle : on the inside of the tailgate backward.
X
Lift up the storage compartment cover.
X
Remove the side rails from the storage compartment in the tailgate.
;
Front right
=
Rear right
?
Rear left
A
Front left
X
Install the side rails with the respective front end ; or A first.
WARNING
G
Make sure the side rails are properly mounted. Otherwise the side rails could disengage
while driving and injure you and
other persons.
Page 79
X
Take one side rail and start by attaching it to front end D.
X
Make sure the seal of the side rail is facing up at position B and is not pinched.
X
Push the side rail at rear end C downwards until it audibly engages into place twice.
X
Install the side rail on the other side in the same manner.
!
Make sure the side rails are installed
correctly. Otherwise the side rails may
function properly or may be damaged.
not
X
Close the storage compartment cover.
X
Press on the “PRESS” marking in the middle
of the storage compartment cover
until it engages audibly.
X
Close the tailgate. Let the tailgate lock into place.
X
Close the driver’s and passenger door.
X
Open the side windows if desired.
!
Make sure the storage compartment cover is closed before closing the tailgate. Otherwise the tailgate could jam.

Side windows

Side windows

Opening and closing the side windows

Opening and closing the side windows manually
Crank for side window on passenger door
Side window on the driver’s door
X
Opening: Turn crank : counterclockwise.
X
Closing: Turn crank : clockwise.
Side window on the passenger door
X
Opening: Turn crank : clockwise.
X
Closing: Turn crank : counterclockwise.
Opening and closing the power windows
This feature is only available on the model passion and BRABUS.
WARNING
G
Do not keep any part of your body up against the side window pane when opening a window. The downward motion of the pane
pull that part of your body down between
may the window pane and the door frame and trap it there. If there is a risk of entrapment, release the switch and pull up the top of the switch to close the window.
77
>> Controls.
Z
Page 80

Driving and parking

78
WARNING
G
When closing the windows, make sure there
no danger of anyone being harmed by the
is closing procedure.
The closing of the side windows can be immediately stopped by releasing the switch.
When leaving the vehicle, always remove the key from the starter switch, take it with you, and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. A child’s unsupervised access to a vehicle could
>> Controls.
result in an accident and/or serious personal injury.
The switches for both power windows are on the driver’s door. In addition, there is a switch for the passenger side on the passenger door.
X
Automatic opening: Press the top of the respective switch briefly. The corresponding side window opens completely.
X
Stopping during automatic opening:
Press or pull the top of the respective switch again. The corresponding side window stops immediately.
Driving and parking

Starting

WARNING
G
Make sure absolutely no objects are obstructing the pedals’ range of motion. Keep the driver’s footwell clear of all obstacles. If there are any floormats* carpets in the footwell, make sure the pedals still have sufficient clearance.
During sudden acceleration or braking maneuvers, the objects could get caught between or beneath the pedals and restrict your ability to brake or accelerate. This could lead to accidents and/or injury.
or
:
Side window driver’s door
;
Side window passenger door
X
Make sure the key is in starter switch position 1.
X
Opening: Press and hold the top of the respective switch. The corresponding side window moves downwards until you release the switch.
X
Closing: Pull and hold the top of the respective switch. The corresponding side window moves upwards until you release the switch.
WARNING
G
Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and lead to death.
Do not run the engine in confined areas (such as a garage) which are not properly ventilated. If you think that exhaust gas fumes are entering the vehicle while driving, have the cause determined and corrected immediately. If you must drive under these conditions, drive only with at least one window fully open at all times.
* optional
Page 81
Gearshift pattern for transmission
:
Release button
j
k
i
h
p
q
±
Park position
Reverse gear
Neutral position
Drive position
Manual gearshifting
Upshifting
Downshifting
Starting the engine
!
Shift the transmission into park position P or reverse gear R only when the vehicle is stopped in order to avoid damaging the transmission.
X
Make sure the gear selector lever is set to park position P. The transmission position indicator should be on P.
X
Do not depress the accelerator pedal.
X
Turn the key to starter switch position 2 and release it. The
engine starts automatically (“touch-
start” function).

Driving

X
Depress the brake pedal.
X
Press release button : (Y page 79) to disengage the gear selector lever lock.
Driving and parking
X
Move the gear selector lever to drive position D.
D appears in the transmission position
indicator.
X
Release the brake pedal.
X
Carefully depress the accelerator pedal.
WARNING
G
On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced will not prevent this type of loss of control.
G
It is dangerous to shift the transmission out of park position P or neutral position N if the engine speed is higher than idle speed. pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal.
!
!

Reversing the vehicle

!
vehicle control. Your vehicle’s ABS
WARNING
If your foot is not firmly on the brake
Do not run a cold engine at high engine speeds. Running a cold engine at high engine speeds may shorten the service life of the engine.
Simultaneously depressing the accelerator pedal and applying the brakes reduces engine performance and causes premature brake and drivetrain wear.
Shift the transmission into reverse gear R only when the vehicle is stopped in order to avoid damaging the transmission.
You can drive in reverse gear at a speed of up to 9 mph (15 km/h).
79
>> Controls.
Z
Page 82
Driving and parking
80
X
Depress the brake pedal.
X
Press the release button (Y page 79) to disengage the gear selector lever lock.
X
Move the gear selector lever to reverse gear R.
R appears in the transmission position
indicator.
X
Release the brake pedal.
X
Carefully depress the accelerator pedal.

Parking

>> Controls.
WARNING
G
Do not park this vehicle in areas where combustible
materials such as grass, hay or leaves can come into contact with the hot exhaust system. These materials could be ignited and cause a vehicle fire.
Vehicle movement can cause serious personal injury or damage to the vehicle or the vehicle drivetrain. Therefore, always do the following before turning off the engine and leaving the vehicle:
R
Keep right foot on the brake pedal.
R
Engage the parking brake.
R
Move the gear selector lever to park position P.
R
Slowly release the brake pedal.
R
When parked on an incline, always turn the front wheels towards the curb.
R
Turn the key to starter switch position 0 and remove the key from the starter switch.
R
Take the key with you and lock the vehicle when leaving.
WARNING
G
With the engine not running, there is no power assistance for the brake and steering* systems. In this case, it is important to keep in mind that a considerably higher degree of effort is necessary to brake and steer the vehicle. Adapt your driving accordingly.
X
Properly stop and park the vehicle.
X
Depress the brake pedal.
X
Engage the parking brake (Y page 80). When the ignition is switched on or the engine is running, the brake warning lamp $ (USA only) or J (Canada
in the instrument cluster comes on.
only)
X
Release the brake pedal.
Parking brake
The parking brake serves to secure the vehicle against rolling away when it is stationary or parked.
WARNING
G
Engaging the parking brake while the vehicle is in motion can cause the rear
to lock up. You could lose control of
wheels the vehicle and cause an accident. In addition, the vehicle’s brake lights do not light up when the parking brake is engaged.
X
Releasing: Depress the brake pedal.
X
Pull up slightly on parking brake lever ; and press release button :.
X
Push parking brake lever ; down as far as it will go. When the ignition is switched on or the engine is running, the brake warning lamp $ (USA only) or J (Canada
in the instrument cluster goes out.
only)
X
Engaging: Pull up parking brake lever ; firmly. When the ignition is switched on or the engine is running, the brake warning
* optional
Page 83
Driving and parking
81
lamp $ (USA only) or J (Canada
in the instrument cluster comes on.
only)
WARNING
G
Getting out of your vehicle with the transmission not fully engaged in park position P shut off and the brakes are released, the vehicle can be moved freely with the gear selector lever in all positions except park position P. Also, when parked on an incline, park position P alone may not prevent your vehicle from moving, possibly hitting people or objects.
Always engage the parking brake in addition to shifting to park position P.
When parked on an incline, always turn the front wheels towards the curb.
G
When leaving the vehicle, always remove the key from the starter switch, take it with you, and lock the vehicle. Do not leave children access to an unlocked vehicle. Children could release the parking brake and/or move the gear selector lever from park position P, either of which could result in an accident and/or serious personal injury.
is dangerous. When the engine is
WARNING
unattended in the vehicle, or with
Brake pedal
The brake pedal has two brake circuits independent
of each other. A brake servo is used during braking (when the engine is running) to increase pedal force.
WARNING
G
Make sure absolutely no objects are obstructing the pedals’ range of motion. Keep the driver’s footwell clear of all obstacles. If there are any floormats* or carpets in the footwell, make sure the pedals still have sufficient clearance.
During sudden acceleration or braking maneuvers, the objects could get caught
between or beneath the pedals and restrict your ability to brake or accelerate. This could lead to accidents and/or injury.
WARNING
G
Considerably more effort will be required to apply the brakes if
R
the brake servo has failed
R
a brake circuit has failed
R
the engine is switched off, e.g. for towing the vehicle
The braking distance is likewise greater.
Make sure the engine is running whenever the vehicle is rolling. Have the brake system repaired at an authorized smart center, if there is a fault in the brake system.
If a brake circuit has failed (Y page 164), you must depress brake pedal : further down to achieve the same effect and the braking distance is increased.
i
The
brake servo will only function with
the engine switched on.
WARNING
G
In the event of the vehicle needing to be towed, a significantly greater amount of pedal pressure will be required when the engine is switched off.
>> Controls.
* optional
Z
Page 84

Transmission

82

Turning off the engine

WARNING
G
Do not turn off the engine before the vehicle has come to a complete stop. With the engine not running, there is no power assistance for the brake and steering* systems. In this case, it is important to keep in mind that a considerably higher degree of effort is necessary to brake and steer the vehicle.
X
Depress the brake pedal.
>> Controls.
X
Press the release button (Y page 79) to disengage the gear selector lever lock.
X
Move the gear selector lever to park position P. The transmission position indicator should be on P
!
Always engage the parking brake in
addition to shifting to park position P.
X
Release the brake pedal.
X
Turn the key to starter switch position
0.
X
Remove the key from the starter switch. The electronic immobilizer is activated.
Transmission

Introduction

Your vehicle is equipped with a 5‑speed automated transmission with manual or automatic mode. For information on driving with the transmission see also “Starting” (Y page 78).
WARNING
G
Make sure absolutely no objects are obstructing the pedals’ range of motion. Keep the driver’s footwell clear of all obstacles. If there are any floormats* carpets in the footwell, make sure the pedals still have sufficient clearance.
or
During sudden acceleration or braking maneuvers, the objects could get caught between your ability to brake or accelerate. This could lead to accidents and/or injury.
or beneath the pedals and restrict

Gear selector lever

Gearshift pattern for transmission
:
Release button
j
k
i
h
p
q
±
Park position
Reverse gear
Neutral position
Drive position
Manual gearshifting
Upshifting
Downshifting
The current gear selector lever position appears in the transmission position indicator. When manual gearshifting M is selected, the currently selected gear appears (Y page 88).
WARNING
G
It is dangerous to shift the transmission out of park position P or neutral position N if the engine speed is higher than idle
If your foot is not firmly on the brake
speed. pedal, the vehicle could accelerate quickly forward or in reverse. You could lose
* optional
Page 85
Transmission
83
control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal.

Shifting procedure

The
transmission selects individual gears
automatically, depending on:
R
the gear selector lever position D (Y page 83)
R
the position of the accelerator pedal (Y page 84)
R
the vehicle speed
R
uphill or downhill grades
Press release button : (Y page 82) to disengage the gear selector lever lock when moving the gear selector lever from
R
P to R, N, or D
R
R to P
R
N to R or P
!
Allow the engine to warm up under low load use. Do not place full load on the engine until the operating temperature has been reached.
Shift into reverse gear R or parking position P only when the vehicle is stopped.
Avoid spinning of a drive wheel for an extended period when driving off on slippery road surfaces. Otherwise, the drivetrain could be damaged, which is not covered by the smart Limited Warranty.
With manual gearshifting M selected (Y page 84), you can use the gear selector lever or steering wheel gearshift control to change the gears manually.

Gear selector lever positions

Effect
B
Park position
Gear selector lever position when the vehicle is parked. Place the gear selector lever in park position P only when the vehicle is stopped. The park position is not intended to serve as a brake when the vehicle is parked.
Rather, the driver should always engage the parking brake in addition to placing
gear selector lever in park
the position P to secure the vehicle.
The key can only be removed from the starter switch with the gear selector lever in park position P. With the key removed, the gear selector lever is locked in park position P.
C
Reverse gear
Shift into reverse gear R only when vehicle is stopped.
A
Neutral position
No power is transmitted from the engine to the drive axle. When the brakes are released, the vehicle can be moved freely (pushed or towed).
7
Drive position
The transmission shifts automatically.
x
Manual gearshifting
System-controlled automatic gearshifting is switched off. The driver has to change the gears manually.
>> Controls.
Z
Page 86
Transmission
84
The current gear selector lever position appears in the transmission position indicator (Y page 88).

Driving tips

Accelerator pedal position
Your driving style influences the transmission’s shifting behavior:
Less throttle earlier upshifting More throttle later upshifting
>> Controls.
Kickdown
Use kickdown when you want maximum acceleration.
X
Press the accelerator pedal past the point of resistance. Depending on the engine speed the transmission shifts into a lower gear.
X
Ease up on the accelerator pedal when you have reached the desired speed. The transmission shifts up again.
Stopping
When you stop briefly, e.g. at traffic lights:
X
Leave the transmission in gear.
X
Hold the vehicle with the brake.
When you stop for a longer period with the engine idling and/or on a hill:
X
Engage the parking brake.
X
Move the gear selector lever to park position P.
Working on the vehicle
WARNING
G
When working on the vehicle, engage the parking brake and move the gear selector lever to park position P. Otherwise the vehicle could roll away which could result
in an accident and/or serious personal injury.
Driving on uphill grades
Your vehicle has a hill‑start assist system.
WARNING
G
The hill-start assist system is not designed does not prevent the vehicle from moving when parked on an incline.
Always engage the parking brake in addition to shifting to park position P.
to function as a parking brake and
On uphill grades the hill‑start assist system maintains the pressure in the brake system for approximately one second after you have released the brake pedal. Therefore, you can start off smoothly without the vehicle moving immediately after releasing the brake pedal.
X
Release the brake pedal.
X
Apply sufficient pressure to the accelerator pedal.
!
After approximately one second, the hill‑start assist system stops braking the vehicle, which then can roll backwards. If you open the driver’s door within this time, the hill‑start assist system is deactivated and a warning signal sounds.
i
The
hill‑start assist system is inactive if you start off with the parking brake engaged.

Manual gearshifting

With manual gearshifting M selected, system-controlled automatic gearshifting is switched off and you need to change the gears by upshifting or downshifting manually using the gear selector lever or the steering wheel gearshift control10.
10
Model passion and BRABUS only.
Page 87
Transmission
85
!
Allow the engine to warm up under low load use. Do not place full load on the engine until the operating temperature has been reached.
Shift into reverse gear R or parking position P only when the vehicle is stopped.
Avoid spinning of a drive wheel for an extended period when driving off on slippery road surfaces. Otherwise, the drivetrain could be damaged, which is not covered by the smart Limited Warranty.
Activating manual gearshifting
X
Move the gear selector lever to drive position D (Y page 82).
X
Pull one of the shift paddles (Y page 85) towards you.
or
X
Move the gear selector lever to manual gearshifting M (Y page 82). System-controlled automatic gearshifting is switched off.
You
can upshift or downshift through the
gears in succession.
The currently engaged gear appears in the multifunction display (Y page 85).
Upshifting
X
Briefly push the gear selector lever forward in the + direction (Y page 82).
or
X
Pull right shift paddle ; (Y page 85) towards you. The transmission shifts to the next higher gear.
i
With manual gearshifting M selected, the transmission shifts up only to prevent engine overrevving.
Downshifting
WARNING
G
On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced will not prevent this type of loss of control.
X
vehicle control. Your vehicle’s ABS
Briefly pull the gear selector lever backward in the - direction (Y page 82).
or
X
Pull left shift paddle : (Y page 85) towards you. The
transmission shifts to the next lower
gear.
Kickdown
You can use kickdown when you want maximum acceleration.
X
Press the accelerator pedal past the point of resistance. Depending on the engine speed the transmission shifts into a lower gear.
X
When you have reached the desired speed, briefly push the gear selector lever forward in the + direction (Y page 82).
or
X
Pull right shift paddle ; (Y page 85) towards you. The transmission shifts to the next higher gear.
>> Controls.
Z
Page 88

Instrument cluster

86
Deactivating manual gearshifting
X
With drive position D selected: Pull and hold right shift paddle ; (Y page 85) towards you for longer than two seconds.
or
X
With manual gearshifting M selected: Move the gear selector lever to drive position D (Y page 82). System-controlled automatic gearshifting is switched on again.
>> Controls.

Emergency operation (limp-home mode)

In this mode only a certain gear or a certain
gear combination can be selected. This mode is triggered in case of transmission malfunctions and enables you driving to the nearest workshop such as a smart center.
If vehicle acceleration becomes less responsive or sluggish or the transmission no longer shifts, the transmission is most likely operating in limp-home (emergency operation) mode. The transmission position indicator flashes and the ¬ symbol appears in the multifunction display.
Driving in limp-home mode:
X
Move the gear selector lever to drive position D (Y page 82).
X
Continue to drive.
X
Have the transmission checked at an authorized smart center as soon as possible.
i
If the attempt to teach-in the transmission fails, you cannot continue to drive. Therefore we strongly recommend that you have the transmission taught-in at a qualified workshop or at an authorized smart center.
Teaching-in the transmission system:
X
Stop the vehicle in a safe location.
X
Move the gear selector lever to park position P.
X
Turn off the engine.
X
Wait at least 30 seconds before restarting.
X
Press the brake pedal.
X
Restart the engine Three bars instead of P appear in the multifunction display.
X
Wait at least 30 seconds. The transmission is taught in.
When teaching-in was successful: P appears
in the multifunction display again and normal transmission operating is restored.
X
Continue to drive.
After an unsuccessful teaching-in: Three bars instead of P appear in the multifunction display.
X
Do not continue to drive.
X
Turn off the engine.
X
Engage the parking brake when leaving the vehicle.
X
Contact Roadside Assistance or an authorized smart center.
i
It is possible that a gear combination including the reverse gear can not be selected. Keep in mind when parking, that reversing the vehicle might be impossible.
In case of a minor transmission malfunction,
it might be possible to teach­in the transmission in order to restore the normal transmission mode.
Instrument cluster

Multifunction display

The following displays and indicators appear in the multifunction display:
Page 89
Multifunction display (U.S. vehicles)
:
Maintenance service symbol (status indicator)
;
Main odometer display and days or distance to next maintenance service
=
Transmission position indicator
?
Digital clock
A
Outside temperature display
B
Fuel level display
C
Status indicator with:
• Trip odometer display
• Reserve fuel indicator
Instrument cluster
• Trip odometer display
• Reserve fuel indicator
WARNING
G
No messages will be displayed if either the instrument cluster or the multifunction display is inoperative.
As a result, you will not be able to see information about your driving conditions, such as speed, outside temperature, or warning/indicator lamps. Driving characteristics may be impaired.
If you must continue to drive, please do so with added caution. Visit an authorized smart center as soon as possible.
Multifunction display illumination
The multifunction display illumination comes on when the starter switch is in position 1. 30 seconds when the starter switch is in position 0.
For adjusting the multifunction display illumination, see “Adjusting instrument cluster illumination” (Y page 92).
It goes out after approximately
87
>> Controls.
Multifunction display (Canada vehicles)
:
Maintenance service symbol (status indicator)
;
Main odometer display and days or distance to next maintenance service
=
Transmission position indicator
?
Digital clock
A
Outside temperature display
B
Freeze warning
C
Fuel level display
D
Status indicator with:
Main odometer display
Example illustration (U.S. vehicles)
i
Canada vehicles: The main odometer
display shows km instead of miles.
The main odometer display appears in the multifunction display continuously.
Exception: The next maintenance service is due. After starting the engine, days or
Z
Page 90
Instrument cluster
88
distance to next maintenance service will appear instead of the main odometer display. The main odometer display will reappear
after approximately ten seconds.
For information on how to select the maintenance service interval display, see “Maintenance service interval display” (Y page 91).
Transmission position indicator
The following information is displayed in the transmission position indicator:
>> Controls.
R
Current gear selector lever position
R
Current engaged gear (when manual gearshifting selected)
i
A flashing R in the display indicates
that the gear selector lever is in position R but the reverse gear is not engaged. Stop the vehicle to let the reverse gear engage.
When manual gearshifting is selected:
Display Function
1
2
3
4
5
First gear engaged
Second gear engaged
Third gear engaged
Fourth gear engaged
Fifth gear engaged
Digital clock
Example illustration (U.S. vehicles)
i
Canada vehicles: The digital clock shows a 24 h-clock instead of a 12 h-clock.
Example illustration (U.S. vehicles)
Display Function
P
Gear selector lever in park position P
R
Gear selector lever in position R (Reverse gear engaged)
N
Gear selector lever in neutral position N
D
Gear selector lever in drive position D
The time can only be set as long as the colon in the digital clock flashes.
X
Activating time setting: Press and hold right button ; until the colon in the digital clock starts flashing.
X
Setting the time in 1 minute increments:
Press left button : or right
Page 91
button ; repeatedly until the desired time is set.
X
Setting the time quickly: Press left button : or right button ; for longer than one second. The setting speed increases.
X
Setting the time in 10 minute increments:
Press left button : or right
button ; for longer than five seconds. The time is set in 10 minute increments.
X
Confirm time setting: Refrain from pressing either left button : or right button ; until the colon in the digital clock stops flashing. The time is set.
i
The digital clock in the multifunction display is not synchronized with the cockpit clock* (Y page 92).
Outside temperature display
WARNING
G
The outside temperature display is not designed as an ice-warning device and is therefore unsuitable for that purpose.
Indicated temperatures just above the freezing point do not guarantee that the road surface is free of ice. The road may
be icy, especially in wooded areas or
still on bridges. Your vehicle could start to skid if you do not adjust your driving style accordingly.
Therefore, always adjust your driving style to the prevailing road and weather conditions.
Instrument cluster
Example illustration (U.S. vehicles)
i
Canada vehicles: The outside
temperature display shows °C instead of °F.
The outside temperature display appears
the multifunction display continuously.
in A change of the outside temperature will be
displayed with delay.
Freeze warning (Canada vehicles only)
When the outside temperature falls below 3¥, the multifunction display makes you aware of the fact that the road may be icy. An additional freeze warning, i.e. an ice crystal symbol, in the multifunction display flashes. After 60 seconds, the freeze warning stops flashing but continues to be displayed. When the outside temperature rises above 3¥, the freeze warning goes out.
89
>> Controls.
* optional
Z
Page 92
Instrument cluster
90
Fuel level display
Example illustration (U.S. vehicles)
>> Controls.
fuel level display shows the tank’s fuel
The level with the aid of eight segments. The number of dark segments indicates the fuel level in the tank. If all eight segments are dark, the tank is full.
You are driving on reserve fuel if there are no more than 1.0 US gal (3.78 l) of fuel in the tank.
If this occurs,
R
the fuel pump symbol in the fuel level display flashes
R
the reserve fuel indicator shows the fuel level in the tank in 0.1 US gal (0.5 l) increments
For selecting the reserve fuel indicator to be displayed in the status indicator, see “Reserve fuel indicator” (Y page 91).

Selecting display for status indicator

You can select the information to be displayed in the status indicator:
R
Trip odometer display (Y page 90)
R
Maintenance service interval display (Y page 91)
R
Reserve fuel indicator (Y page 91) (when less than 1.0 US gal (3.78 l) of fuel is in the tank)
:
Selecting display for status indicator, setting the clock, activating maintenance service interval display
;
Setting the clock, adjusting instrument cluster illumination
Trip odometer display
Example illustration (U.S. vehicles)
X
Selecting trip odometer display: Press left button : (Y page 90) repeatedly until the trip odometer display appears in the status indicator.
X
Resetting trip odometer display: Press and hold left button : (Y page 90) until the value is set to 0.
Page 93
Maintenance service interval display
Example illustration (U.S. vehicles)
i
Canada vehicles: The maintenance service interval display shows km instead of miles.
The maintenance service interval display will notify you approximately one month before the next maintenance service is due.
The following information will be displayed after starting the engine:
R
Days or distance to next maintenance service
This information will be displayed instead of the main odometer display.
main odometer display will reappear
The after approximately ten seconds (Y page 87).
R
Type of service that is due This information will be displayed in
the status indicator.
X
Start the engine.
Instrument cluster
X
Selecting maintenance service interval display: Press button : on the
instrument cluster repeatedly until the maintenance service interval display appears in the status indicator. Depending on the type of maintenance service that is due, symbol ¬ or } is displayed.
X
Clearing maintenance service interval display: Press button : once.
The maintenance service interval display is cleared.
X
Activating maintenance service interval display: Press button : twice
in quick succession.
Reserve fuel indicator
Example illustration (U.S. vehicles)
The reserve fuel indicator is only displayed when driving on reserve fuel.
X
Selecting reserve fuel indicator: Press button : on the instrument cluster repeatedly until the reserve fuel indicator appears in the status indicator.
91
>> Controls.
Z
Page 94
Instrument cluster
92

Auxiliary instruments*

:
Tachometer
>> Controls.
;
Cockpit clock
Tachometer*
The tachometer displays the engine speed in units of 1 000 rpm.
The tachometer can be turned by approximately 90°.
The
tachometer illumination comes on when you switch on the ignition and the exterior lighting.
!
Do not hang any objects on the
tachometer. This could cause the tachometer to be
torn from its mountings and damage it.
X
Setting the time back in 1 minute increments: Press button : repeatedly
until the desired time is set.
X
Setting the time back quickly: Press button : for longer than two seconds. The setting speed accelerates.
X
Setting the time forward in 1 minute increments: Press button ; repeatedly
until the desired time is set.
X
Setting the time forward quickly: Press button ; for longer than two seconds. The setting speed accelerates.
!
Do not hang any objects on the cockpit
clock. This could cause the cockpit clock to be
torn from its mounting and damage it.
Cockpit clock*
The cockpit clock can be turned by approximately 90°.
The cockpit clock illumination comes on when you switch on the ignition and the exterior lighting.
buttons for setting the time are on the
The top of the cockpit clock.

Adjusting instrument cluster illumination

You can adjust the illumination of the switches, the dials in the instrument cluster, the radio*, the climate control*
and the auxiliary instruments*. Five
panel illumination levels are available.
* optional
Page 95
X
Make sure the key is in starter switch position 1.
X
Switch on the parking lamps.
X
To brighten or dim illumination: Press button : on the instrument cluster repeatedly until the desired setting is reached. The current setting is stored.

Control system*

Introduction

The control system is activated when you turn the key in the starter switch to position 1.
WARNING
G
A driver’s attention to the road and traffic
conditions
focus when driving.
In order to avoid distraction which could
lead to an accident, the driver should
select features and change settings in the
control system only vehicle at a standstill
or when traffic and road conditions permit
it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h ), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.
must always be his/her primary
Control system*

Control lever

You can select the displays in the multifunction in the control system with the control lever.
Control lever (example illustration coupé)
:
Control switch
Pressing up selects a menu.
;
OK button
Confirming a selection. Scrolling
in the Messages menu
=
Control switch
Pressing down selects a menu.

Multifunction display

The multifunction display shows values and settings as well as display messages.
X
Activating the multifunction display:
Turn
the key to starter switch position 1.
X
Confirming messages: Press the OK button on the control lever (Y page 93) briefly.
X
Exiting menu: the control lever (Y page 93) up or down until the message Back appears in the multifunction display.
X
Press the OK button on the control lever briefly.
display and change settings
through stored messages
Press the control switch on
93
>> Controls.
* optional
Z
Page 96
94
Control system*

Menus and submenus

>> Controls.
:
;
=
?
A
B
C
Function
Odometer menu
Consumption menu
START menu (trip statistics since start)
RESET menu (trip statistics since last reset)
Messages menu
Settings menu
Time menu

Odometer menu

The Odometer menu shows you either the main
odometer and the trip odometer or the trip odometer with the amount of fuel left the fuel tank.
:
Main odometer
;
Trip odometer
=
Remaining fuel
X
Press the control switch on the control lever (Y page 93) up or down until the
* optional
Page 97
Odometer menu appears in the
multifunction display.
X
To switch between submenus:
Press the OK
button on the control lever briefly.
X
To reset the trip odometer: Select the trip odometer display.
X
Press button : (Y page 90) on the instrument cluster until the trip odometer is reset to 0.

Consumption menu

The Consumption menu shows you the current fuel consumption.
X
Press the control switch on the control lever (Y page 93) up or down until the
Consumption menu appears in the
multifunction display. The current current fuel consumption appears.
i
Depending on the selected unit in the settings menu (Y page 96), the consumption
is displayed in in miles per gallon (mpg) or in liters per 100 kilometers (l/100 km).
Canada only: When the vehicle is standing, the fuel consumption is displayed in gallons per hour (gal/h) or liters per hour (l/h).

Start menu

The START menu menu shows you the trip statistics since start.
Control system*
:
Average speed since start
;
Time elapsed since start
=
Distance driven since start
?
Average fuel consumption since start
X
Press the control switch on the control lever (Y page 93) up or down until the
menu appears in the multifunction
START
display.
X
To reset: Press button : (Y page 90) on the instrument cluster until the START
menu is reset to 0.
i
The START menu is reset to 0
automatically
R
when the ignition has been switched off for more than 4 hours
R
after driving more than 9 999 miles or kilometers

Reset menu

The RESET menu menu shows you the trip statistics since the last reset.
:
Average speed since last reset
;
Time elapsed since since last reset
=
Distance driven since last reset
?
Average fuel consumption since since last reset
X
Press the control switch on the control lever (Y page 93) up or down until the
95
>> Controls.
* optional
Z
Page 98
96
Control system*
menu appears in the multifunction
RESET
display.
X
To reset: Press button : (Y page 90)on the instrument cluster until the RESET
menu is reset to 0.

Messages menu

The Messages menu stores messages that you can call up.
i
When
no messages have been stored, the
Messages menu is not displayed.
>> Controls.
X
Press the control switch on the control lever (Y page 93) up or down until the
Messages menu appears in the
multifunction display. The number of stored messages is : displayed
X
Press the OK button on the control lever briefly. The first stored message appears.
X
To scroll through messages:
Press the OK
button on the control lever briefly.
For more information on display messages, see (Y page 158).
Maintenance service interval display
The maintenance service interval display will notify you when the next maintenance service
is due and what type of maintenance
service is required. Example:
R
¯ Care Service in XXX mi
R
° Main Service in XXX mi
R
° Main Service in XX Days
X
To confirm: Press the OK button on the control lever briefly. The mesage is stored.
When the due date for the maintenance service has been has been passed, the number
of miles (kilometers) or days since
are preceeded by a minus sign.
!
Failure to have the maintenance service performed at the designated times/mileage, may result in vehicle damage that is not covered by the smart Limited Warranty.

Settings menu

In the Settings menu, you can select individual settings for your vehicle.
The following functions are available:
R
Setting the language
R
Setting the temperature unit
R
Setting the distance and speed unit
X
Press the control switch on the control lever (Y page 93) up or down until the
Settings menu appears in the
multifunction display.
X
Press the OK button on the control lever briefly.
Setting the language
The following languages are available:
R
German
R
English
R
French
R
Italian
R
Spanish
* optional
Page 99
Control system*
97
X
Press the control switch on the control lever (Y page 93) up or down until the
Language submenu appears in the
multifunction display.
X
Press the OK button on the control lever briefly.
X
Press the control switch on the control lever (Y page 93) up or down until the desired language is selected.
X
Press the OK button on the control lever briefly to confirm. The selected language is stored.
Setting the temperature unit
The following units are available:
R
R
X
Press the control switch on the control lever (Y page 93) up or down until the
°F/°C submenu appears in the
multifunction display.
X
Press the OK button on the control lever briefly.
X
Press the control switch on the control lever (Y page 93) up or down until the desired unit is selected.
X
Press the OK button on the control lever briefly to confirm. The selected unit is stored.
Setting the distance and speed unit
The following units are available:
R
Miles (mi)
R
Kilometers (km)
X
Press the control switch on the control lever (Y
page 93) up or down until the mi–
km submenu appears in the multifunction
display.
X
Press the OK button on the control lever briefly.
X
Press the control switch on the control lever (Y page 93) up or down until the desired unit is selected.
X
Press the OK button on the control lever briefly to confirm. The selected unit is stored.
i
Canada only: The unit for the cruise control (Y page 100) does not change, regardless of which unit is set in this menu.

Time menu

The Time menu lets you set the time and offers different display modes.
The following submenus are available:
R
Setting time display mode (12-hour or 24-hour mode)
R
Setting period of day, am or pm
R
Setting the hours
R
Setting the minutes
X
Press the control switch on the control
11
lever (Y page 93) up or down until the
Time menu appears in the multifunction
display.
X
Press the OK button on the control lever briefly.
Setting the time display mode
X
Press the control switch on the control lever (Y page 93) up or down until the
12h 24h submenu appears in the
multifunction display.
X
Press the OK button on the control lever briefly.
X
Press the control switch on the control lever (Y page 93) up or down until the desired setting is selected.
X
Press the OK button on the control lever briefly to confirm. The selected mode is stored.
>> Controls.
11
Only available in 12-hour mode.
* optional
Z
Page 100
98

Audio system*

Setting the period of day
X
Press the control switch on the control lever (Y page 93) up or down until the
am pm submenu appears in the
multifunction display.
X
Press the OK button on the control lever briefly.
X
Press the control switch on the control lever (Y page 93) up or down until the desired setting is selected.
X
Press the OK button on the control lever briefly to confirm.
>> Controls.
The selected mode is stored.
Setting the hours
X
Press the control switch on the control lever (Y page 93) up or down until the
Hour submenu appears in the
multifunction display.
X
Press the OK button on the control lever briefly.
X
Press the control switch on the control lever (Y page 93) up or down until the desired setting is selected.
X
Press the OK button on the control lever briefly to confirm. The selected hours are stored.
Setting the minutes
X
Press the control switch on the control lever (Y page 93) up or down until the
Minute submenu appears in the
multifunction display.
X
Press the OK button on the control lever briefly.
X
Press the control switch on the control lever (Y page 93) up or down until the desired setting is selected.
X
Press the OK button on the control lever briefly to confirm. The selected minutes are stored.
Audio system*
WARNING
G
In order to avoid distraction which could
to an accident, the driver should enter
lead system settings with the vehicle at a standstill and operate the system only when road and traffic conditions permit. Always pay full attention to traffic conditions first before operating system controls while driving.
Bear in mind that at a speed of just 30 mph (approximately 50 km/h), your vehicle is covering a distance of 44 feet (approximately 14 m) every second.
WARNING
G
Always select a volume that allows you to
hear ambient sound in your immediate
still vicinity (e.g. horns, emergency rescue vehicles, police vehicles, etc.). You could otherwise cause an accident.
WARNING
G
If you wish to have an audio system other than an original smart audio system fitted in your vehicle, please always have the necessary work performed at an authorized smart center.
This is particularly important if your vehicle is fitted with a radio preinstallation. Improper connection can result in the failure of important vehicle functions, thereby endangering the operating safety of your vehicle and thus your own safety and that of other people.
The following pages contain a brief description
of the audio systems available
for the coupé and cabriolet. The devices are described with their full
complement of equipment. The description for your individual equipment specification applies.
Please refer to the separate operating instructions for detailed functions.
* optional
Loading...