SMART CAS-340, CAS-360, Audio CAS-340 Quick Reference

Page 1
Quick reference
CAS-340 control unit top view
USB receptacle
Auxiliary inputs
Connect your projector to Aux In 1 and any other audio input to Aux In 2.
Power connection
Reset
Hold for three seconds to reset the system.
Room connection
Connect your room module here.
Line Out / ALS Out
Connect a recording feed or an assistive listening device here.
CAS-340 control unit bottom view
Power
SMART Audio™ classroom amplification system
Models CAS-340 and CAS-360
1017155
Page 2
2 | QUICK REFERENCE – SMART AUDIO CLASSROOM AMPLIFICATION
CAS-360 control unit top view
LCD screen
Power Control dial
USB receptacle
Connect your computer here.
Auxiliary inputs
Connect your projector to Aux In 1 and any other audio input to Aux In 2.
Power in
Reset
Hold for three seconds to reset the system.
Room connection
Connect your room module here.
Line Out / ALS Out
Connect a recording feed or an assistive listening device here.
CAS-360 control unit bottom view
SYSTEM
1017155
Page 3
3 | QUICK REFERENCE – SMART AUDIO CLASSROOM AMPLIFICATION
Soft button
Press to mute auxiliary audio input at the control unit. Refer to the user’s guide (smarttech.com/kb/155322
)
for customization instructions.
Volume up
Press to increase the microphone volume.
Mute / Power off
Press to mute the microphone. Press for four seconds to turn off the microphone.
Volume down
Press to decrease the microphone volume.
Status light
Green (solid) - On
Green (flashing) - Muted
Red (solid) - Low battery
Red (flashing) - Charging
Amber - Programming
Microphone input
3.5 mm jack for optional external microphone input.
Auxiliary input
3.5 mm jack for MP3 player or other audio source.
To turn on the microphone
Press any button for one second.
To turn off the microphone
Press the mute button for four seconds.
Microphone
To customize the microphone
Press the soft button and the volume down button for five seconds. Refer to the user’s guide (smarttech.com/kb/155322
) for
more information.
To adjust auxiliary input volume
Press the mute button, and then press the volume buttons to adjust volume for auxiliary audio inputs connected to the control unit.
T o charge the microphone
Place the microphone facing forward in the microphone charging cradle after each use.
SYSTEM
smarttech.com/support | smarttech.com/contactsupport
© 2012 SMART Technologies ULC. All rights reserved. SMART Audio, the SMART logo, smarttech and all SMART taglines are trademarks or registered trademarks of S MART Technologies ULC in the U.S. and/or other countri es. All thir d- p ar ty product and company names may be trademarks of their respective owners. Cont en ts ar e subje ct to cha ng e with ou t notice. 01/2012.
1017155
Loading...