SMART 60wi Product Sheet
Specification
LightRaise™ 60wi interactive
projector
Model SLR60wi
Physical specifications
Size
Weight
Projector box
Shipping size
Shipping weight
Boom kit box
Shipping size
Shipping weight
System
requirements
14" W × 14 3/4" H × 30 1/4" D
(35.6 cm × 37.5 cm × 76.8 cm)
28 lb. (12.7 kg)
20 1/4" W × 19 1/2 " H × 22 3/4" D
(51.6 cm × 49.4 cm × 57.9 cm)
32 lb. (14.5 kg)
10" W × 8 1/2 " H × 17" D
(25.4 cm × 21.6 cm × 43.2 cm)
12 lb. (5.5 kg)
All dimensions +/- 1/8" ( 0.3 cm). All w eights +/- 2 l b. (0.9 kg).
System requirements
Windows® operating systems or Mac operating system software as detailed in the
SMARTNotebook™ collaborative learning software for Windows and Mac computers
release notes (smarttech.com/kb/170144). Your LightRaise™ 60wi interactive projector
supports one computer connection on a primary display only.
USB connection USB 2.0 full-speed for HID multitouch and SMARTSupport.
S P E C I F I C A T I O N
LightRaise 60wi interactive projector – Model SLR60wi
Standard features
Software Interact with applications, perform mouse functions and write and erase digital ink using a
finger or the interactive pen.
l For basic mouse operations with a finger or an interactive pen, you don’t need to install
SMART Product Drivers on computers with Windows operating systems.
N OT E
If your Windows operating system is Windows 7 or later, it supports dual touch and
has pen and finger differentiation.
l Advanced features, including the calligraphic pen, are available if you install SMART
software from the included DVD. Software upgrades are available from
smarttech.com/downloads.
Projector features
Aspect ratio 16:10 native aspect ratio with support for 4:3, 5:4, and 16:9 ratios with scaling
Contrast ratio 3400:1
Projected image
size range and
ceiling clearance
Minimum interactive
area on a blank wall
Maximum interactive
area on a blank wall
Throw ratio 0.36:1
N OT E
The interactive areas listed are for projecting onto a blank, vertical wall. When projected
onto an existing whiteboard, the maximum diagonal area size reduces by 1 1/2" (3.8 cm)
for each 1/2" (1.3 cm) of whiteboard thickness. For more information about interactive area
sizes and ceiling clearances, see the LightRaise 60wi interactive projector mounting
template (smarttech.com/kb/170271).
67" (170.2 cm) diagonal
35 1/2" H × 56 3/4" W (90.2 cm × 144.1 cm)
Minimum 15 1/2" (39.4 cm) clearance required from top of image area to ceiling
100" (254.0 cm) diagonal
84 3/4" H × 53" W (215.3 cm × 134.6 cm)
Minimum 19 1/4" (48.9 cm) clearance required from top of image area to ceiling
Display resolution l WXGA 1280 × 800
l HD ready
2
S P E C I F I C A T I O N
LightRaise 60wi interactive projector – Model SLR60wi
Display technology The projection engine uses DLP® technology by TexasInstruments™, providing
BrilliantColor™ performance and quality Gamma 2.2 correction with Bright Room, Dark
Room, sRGB, User and SMART Presentation modes.
Video system
NTSC, NTSC 4.43, PAL, PAL-N, PAL-M and SECAM
compatibility
Video interface
compatibility
Video format
compatibility
HDCP compliant HDMI, Composite, VESA® RGB with additional interface support for
Component YPbPr and Component YCbCr inputs with the proper adapters (not included)
The projector has a native 16:10 aspect ratio WXGA resolution and supports XGA, VGA,
SVGA, SXGA, Quad VGA, SXGA+ and UXGA formats with scaling.
Synchronization Auto image synchronization (auto tracking, frequency, position adjustment, source detect
and phase detect)
Keystone
Corrects for projector tilt ±15 degrees
correction
Brightness Adjustable to compensate for ambient light. Estimated at 2500 lumens at a CCT of 6500 K by
the IEC method.
Lamp life 3500 hours in Standard 230 W mode. 5000 hours in Economy 190 W mode.
Projector noise 38 dBA at high speed and 33 dBA at standard speed, measured using the JIS method
Speakers The projector includes two built-in 10W speakers.
Frequency range 378 Hz to 15 kHz
Speaker sensitivity 83 dB SPL at 0.5 m
Controls
Remote control Provides a method of controlling the projector and adjusting the projector settings.
External control The RS-232 control connector is configured to accept control codes from your computer or
from an optional room control system. Room control is based on an RS-232 standard. For
more information, see LightRaise 60 wi interactive projector User's guide
(smarttech.com/kb/170295).
Network control RJ45 connector for network control. A network cable isn’t included.
3
Loading...