Smarfid Security Equipment REM3040 User Manual
User Manual Of REM3040
1.Parameter:
Work Voltage:DC5V
Frequency:433MHz optional
Decoding:Learning Code,Rolling Code.
Static Currency:6mA
Signal Output:4.5V High Level Output.
Modulation Mode: ASK,OOK.
Work Mode:Jog(inching),Self-lock,Interlock.
Sensitivity:-110db.
Size:34*20*5.3mm.
Weight:6g.
(433MHz Remote Module)
Model No.: REM3040
Product Name: 433MHz Remote Module
2.Feature:
REM3040 is a super-heterodyne receiver with high sensitivity,adopting latest high-technical RF
IC,with stable,qualified decoding character,against high-level interference in seriously working
1
environment in site,working for long distance together with its programmed remote.At
Pin
Name
Function
1
VT
Signal Output
2
D3
Data Output
3
D2
Data Output
4
D1
Data Output
5
D0
Data Output
6
5V
Anode
7
GND
Cathode
(1).Pin Order(From Left to Right)VT、D3、D2、D1、D0、5V、GND;
(2).5V & GND for 5V power;
(3).VT for signal testing,means when receiver working signal,it will output 5V high level;
(4).D0 to D3 is Data output,working respectively for 4 button in the remote;
(5).These 5 pin(except 5V & GND) output 5V voltage,it can activate the relay through built-out
drive circuit;
(6).The round-hole in the left-side is for connecting the antenna.
Press the learning button in the receiver for long time,LED indicator first on,then off,
Finally loose your press,that means clear code is finished.After clear code,all the previous
programmed remote can not work with this receiver.
Press the learning button for long time,2 seconds later,LED indicator is on;
4 seconds later,LED indicator will be off.
present,this model is the best choice in the field of super-heterodyne receiver.
It can decode fix code, learning code and rolling code,such as 2262\2264\2260,301,etc.
The user can progamme the work mode by theirself to choose jog(inching) or self-lock or
interlock.
3.Pin & Its Function:
Notice:
4.Remote Clear Code & Learning Code:
(1).Clear Code:
(2).Learning Code:
2
Loading...