SLX 27822HSG User Manual

27822HSG

Ready

Introduction

Special features include:

•

4G Ready - built-in lter removes interference and

channel loss caused by 4G mobile phone signals

•

Dedicated inputs for UHF and FM/DAB

•

Side mounted terminals provide easy cable management

Careline: 08457 573 479 - (Local Rate UK only) Support:

www.philex.com/support

The SLx range of aerial boosters from Philex is
designed to improve picture and sound quality
by amplifying weak UHF, VHF and FM/DAB radio
signals. The SLx2 can also be used to boost/
distribute Digital Television and Sky™/ Sky+™ signals
around the home.

Please Note: To view output from the satellite RF2
output you will need a TV with an analogue tuner.
The SLx2 is not equipped with a digital bypass
and is not compatible with infra red extenders/
links which control Sky™ boxes from other rooms.
(Bypass kits are available - sold separately).

Designed with style, sophistication and value in
mind, the SLx range is the preferred choice for both
the professional aerial installer and the home user
wanting to get the very best performance from their
AV equipment.

With full instructions and wall mounting template,
installing the SLx2 aerial amplier is both quick
and easy.

2 Way Signal Booster

USER GUIDE

Installing your amplier

Aerial signal distribution

You can choose to boost either TV or radio signals.

1. Connect your UHF aerial downlead (or your FM/
DAB aerial downlead) to the ANT socket.

2. Connect your TVs (or FM tuners) to either of the
SLx2 TV1 or TV2 sockets in any combination.

If your TV does not have a built-in Freeview™
receiver you will need to connect your TV to the
amplier via a Freeview™ set top box.