SLS SL4012BD, SL4012BN Datasheet
Semiconductor
Dual 4-Input NAND Gate
High-Voltage Silicon-Gate CMOS
The SL4012B NAND gates provide the system designer with direct
emplementation of the NAND function.
• Operating Voltage Range: 3.0 to 18 V
• Maximum input current of 1 µA at 18 V over full package-
temperature range; 100 nA at 18 V and 25°C
• Noise margin (over full package temperature range):
1.0 V min @ 5.0 V supply
2.0 V min @ 10.0 V supply
2.5 V min @ 15.0 V supply
SL4012B
ORDERING INFORMATION
SL4012BN Plastic
SL4012BD SOIC
TA = -55° to 125° C for all packages
LOGIC DIAGRAM
PINS 6, 8 = NO CONNECTION
PIN 14 =V
PIN 7 = GND
CC
PIN ASSIGNMENT
NC = NO CONNECTION
FUNCTION TABLE
Inputs Output
A B C D Y
L X X X H
X L X X H
SLS
X X L X H
X X X L H
H H H H L
X = don’t care
System Logic
SL4012B
Semiconductor
MAXIMUM RATINGS
*
Symbol Parameter Value Unit
V
CC
V
IN
V
OUT
I
IN
P
P
DC Supply Voltage (Referenced to GND) -0.5 to +20 V
DC Input Voltage (Referenced to GND) -0.5 to VCC +0.5 V
DC Output Voltage (Referenced to GND) -0.5 to VCC +0.5 V
DC Input Current, per Pin ±10 mA
Power Dissipation in Still Air, Plastic DIP+
D
SOIC Package+
Power Dissipation per Output Transistor 100 mW
D
750
500
Tstg Storage Temperature -65 to +150 °C
T
Lead Temperature, 1 mm from Case for 10 Seconds
L
260 °C
(Plastic DIP or SOIC Package)
*
Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
mW
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Max Unit
V
CC
VIN, V
OUT
T
A
This device contains protection circuitry to guard against damage due to high static voltages or electric
fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated
voltages to this high-impedance circuit. For proper operation, VIN and V
GND≤(VIN or V
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC).
Unused outputs must be left open.
DC Supply Voltage (Referenced to GND) 3.0 18 V
DC Input Voltage, Output Voltage (Referenced to GND) 0 V
CC
Operating Temperature, All Package Types -55 +125 °C
should be constrained to the range
OUT
)≤VCC.
OUT
V
SLS
System Logic
Loading...