Sloan RESS-C-1.6-1.1-HW User Manual

►► Code NumberCode Number

3375407

►► DescriptionDescription

Battery Powered, Sensor Activated Sloan ECOS® Electronic Dual
Flush Model Retrofit Conversion Kit for Exposed Closet Flushometers.

►► Flush CycleFlush Cycle

Full Flush (Large Button - 1.6 gpf/6.0 Lpf) / Reduced Flush (Small
Button - 1.1 gpf/4.2 Lpf)

►► SpecificationsSpecifications

Quiet, Exposed, Sloan ECOS® Electronic Dual Flush, Battery
Powered, Sensor Activated Closet Flushometer Retrofit Conversion
Kit for Sloan Royal®, Sloan® and Regal® Flushometers with the
following features:

● ● Initial Set-up Range Indicator Light (first 10 minutes)

● ● User friendly three (3) second Flush Delay

● ● “Low Battery” Flashing LED

● ● Installation Tools provided

● ● Latching Solenoid Operator

● ● Engineered Metal Cover with replaceable Lens Window

● ● Courtesy Flush® Override Button

● ● PERMEX® Synthetic Rubber Flex Tube Diaphragm with Dual
filtered bypass designed for improved life and reduced
maintenance

● ● ADA Compliant Sloan ECOS® Electronic Battery Powered
Infrared Sensor for automatic “No Hands” operation

● ● Infrared Sensor with Multiple-focused, Lobular Sensing Fields for
high and low target detection with range adjustment screw

● ● Four (4) Size AA alkaline Batteries included: Duracell® with
DURALOCK Power Preserve TechnologyTM-guaranteed for up to
10 years in storage

● ● Diaphragm molded from PERMEX® Rubber Compound for
Chloramine resistance

● ● Line Powered with 6 VAC Step Down Transformer

►► VariationsVariations

● ● Locking Ring for Zurn® Flush Valve Bodies

►► Special FinishesSpecial Finishes

● ● Satin Chrome (PVD finish)

● ● Polished Brass (PVD Finish)

● ● Brushed Nickel (PVD Finish)

►► AccessoriesAccessories

See Accessories Section and Sloan ECOS® Accessories Section of
the Sloan catalog for details on these and other Sloan ECOS®
Electronic Dual Flush Flushometer variations.

►► FixturesFixtures

Consult factory for matching Sloan brand fixture options.

►► ELECTRICAL SPECIFICATIONSELECTRICAL SPECIFICATIONS

Control CircuitControl Circuit

● ● Solid State

● ● 6 VAC/7.6 VDC Input 8 Second Arming Delay 72 Hour Sentinel
Flush

● ● 8 Second Arming Delay

● ● 3 Second Flush Delay

Sensor TypeSensor Type

►► Automatic OperationAutomatic Operation

Sloan ECOS® Flushometers can also be activated via multi-lobular
infrared sensor. By detecting user presence and duration, the Sloan
ECOS® Smart Sense TechnologyTM will determine the proper flush
volume for unequalled water efficiency.

►► Manual OperationManual Operation

Sloan ECOS® Electronic Flushometers incorporate intuitive button
design for easy manual activation. Straightforward graphics alert
user to proper activation. The reduced flush for liquid waste or full
flush for solid waste. To further educate the user, two (2) instructional
wall plates are included with each Sloan ECOS® Flushometer.

►► Functional & HygienicFunctional & Hygienic

Touchless, sensor operation eliminates the need for user contact to
help control the spread of infectious diseases. The Sloan ECOS®
Electronic Flushometers are provided with Override Buttons to allow
a “courtesy flush” for individual user comfort.

►► Smart Sense TechnologySmart Sense Technology

"The Sloan ECOS® Hardwire Flushometer is equipped with Smart
Sense Technology™ which applies extended range and logic
techniques to significantly reduce water usage in high use urinal
applications

►► PatentedPatented

D598,976

►► Compliance & CertificationsCompliance & Certifications

This space for Architect/Engineer Approval

Sloan ECOS® Flushometers
ECOS RESS-C-1.6/1.1 HW

2016-12-05 Page 1 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com

● ● Active Infrared

Sensor RangeSensor Range

● ● Nominal 22” - 42” (559 mm -1067 mm), Adjustable ± 8” (203 mm)

Indicator LightsIndicator Lights

● ● Range Adjustment

Operating PressureOperating Pressure

● ● 15 - 100 psi (104 - 689 kPa)

►► ROUGH-INROUGH-IN

When installing the Sloan ECOS® Electronic Dual Flush in a
handicap stall: Per the ADA Guidelines (section 604.9.4) it is
recommended that the grab bars be split or shifted to the wide side
of the stall.

Model ECOS RESS-C

RESS-C units do NOT include a Valve Body, Supply Stop or Vacuum
Breaker.

►► OPERATIONOPERATION

1. A continuous, invisible light beam is
emitted from the Sloan ECOS® Flush Sensor.

2. As the user enters the beam's effective
range, 22” to 42” (559 mm to 1067 mm), the
beam is reflected into the Scanner Window
to activate the Output Circuit. Once
activated, the Output Circuit continues in a
""hold"" mode for as long as the user remains
within the effective range of the sensor. If
the user stays longer than 65 seconds, a full
flush will automatically initiate when the user
leaves.

3. Once a user is detected, if the user leaves
in 65 seconds or less, a reduced flush will
automatically initiate. The circuit
automatically resets and is ready for the
next user.

►► WIRING DIAGRAMWIRING DIAGRAM

Sloan ECOS® RESS-C-1.6/1.1 HW

Sloan ECOS® Flushometers
ECOS RESS-C-1.6/1.1 HW

2016-12-05 Page 2 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com