Sloan RESS-C-1.6-1.1 User Manual

►► Code NumberCode Number

3375300

►► DescriptionDescription

Exposed, Solar Powered, Sensor Activated Sloan SOLIS® Dual Flush
Model Retrofit Conversion Kit for Exposed Closet Flushometers.

►► Flush CycleFlush Cycle

Full Flush (Large Button - 1.6 gpf/6.0 Lpf) / Reduced Flush (Small
Button - 1.1 gpf/4.2 Lpf)

►► SpecificationsSpecifications

Quiet, Exposed, Sloan Solis® Dual Flush, Solar Powered, Sensor
Activated Closet Flushometer Retrofit Conversion Kit for Royal®,
Sloan® and Regal® Flushometers with the following features:

● ● Initial Set-up Range Indicator Light (first 10 minutes)

● ● User friendly three (3) second Flush Delay

● ● “Low Battery” Flashing LED

● ● Installation Tools provided

● ● Reduces water volume by up to 30% when a reduced flush
occurs

● ● Solar Powered. The sensor assembly is powered by a solar cell
that will harvest power from artificial indoor light, either
incandescent or fluorescent light, and use it as the energy
source. The solar cell can provide approximately 100% power
with 650 Illuminance (lux).

● ● Four (4) Size AA Battery Back-up Power Source

● ● Infrared Sensor with Multiple-focused, Lobular Sensing Fields for
high and low target detection

● ● Latching Solenoid Operator

● ● Infrared Sensor Range Adjustment Screw

● ● Fixed Metering Bypass and No External Volume Adjustment to
Ensure Water Conservation

● ● If the user is present for less than one minute and leaves the
sensing zone or chooses the small override button, a reduced fl
ush initiates (1.1 gpf/4.2 Lpf) eliminating liquid and paper waste,
saving 1/2 gallon of water

● ● If the user is present for greater than one minute and leaves the
zone or chooses the large override button, the full fl ush initiates
(1.6 gpf/ 6.0 Lpf) eliminating solid waste and paper

● ● PERMEX® Synthetic Rubber Flex Tube Diaphragm with twin linear
filtered bypass and vortex cleansing action

● ● Flex Tube Diaphragm designed for improved life and reduced
maintenance

● ● ADA Compliant Sloan SOLIS® Electronic Single Flush Solar
Powered Infrared Sensor for automatic “No Hands” operation

● ● Engineered Metal Cover with replaceable Lens Window

● ● Diaphragm molded from PERMEX® Rubber Compound for
Chloramine resistance

● ● Courtesy Flush® Override Buttons

● ● CP Handle Cap

►► Automatic OperationAutomatic Operation

Sloan SOLIS® Solar powered, Dual Flush Flushometers can also be
activated via multi-lobular infrared sensor. By detecting user
presence and duration, the Sloan Solis® Smart Sense Technology™
will determine the proper flush volume for unequalled water
efficiency.

►► Manual OperationManual Operation

Sloan SOLIS® Solar powered, Single Flush Flushometers incorporate
intuitive button design for easy manual activation. Straightforward
graphics alert user to proper activation.

►► Functional & HygienicFunctional & Hygienic

Touchless, sensor operation eliminates the need for user contact to
help control the spread of infectious diseases.

►► AccessoriesAccessories

See Accessories Section and Sloan SOLIS® Dual Flush Accessories
Section of the Sloan catalog for details on these and other Sloan
SOLIS® Dual Flush Flushometer variations.

►► Compliance & CertificationsCompliance & Certifications

This space for Architect/Engineer Approval

►► OPERATIONOPERATION

SOLIS® Solar-Powered
Flushometer
SOLIS RESS-C-1.6/1.1

2016-12-05 Page 1 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com

►► ELECTRICAL SPECIFICATIONSELECTRICAL SPECIFICATIONS

Control CircuitControl Circuit

Solid State

6 VAC/7.6 VDC Input 8 Second Arming Delay 72 Hour Sentinel Flush

8 Second Arming Delay

3 Second Flush Delay

Sensor TypeSensor Type

Active Infrared

Sensor RangeSensor Range

Nominal 22” - 42” (559 mm -1067 mm), Adjustable ± 8” (203 mm)

Battery Back Up TypeBattery Back Up Type

(4) AA Alkaline

Battery LifeBattery Life

6 Years @ 4,000 flushes/month

Indicator LightsIndicator Lights

Range Adjustment

Operating PressureOperating Pressure

15 - 100 psi (104 - 689 kPa)

►► ROUGH-INROUGH-IN

When installing the Sloan SOLIS® Dual Flush in a handicap stall:

Per the ADA Guidelines (section 604.9.4) it is recommended

that the grab bars be split or shifted to the wide side of the

stall.

RESS-C shown installed on an existing

Sloan Flushometer.

RESS-C units do NOT include a Valve Body, Supply Stop or Vacuum
Breaker.

1. A continuous, invisible light beam is
emitted from the SOLIS® Sensor.

2. As the user enters the beam's
effective range, 22 to 42 inches (559
mm to 1067 mm), the beam is reflected
into the Scanner Window to activate
the Output Circuit. Once activated, the
Output Circuit continues in a "hold"
mode for as long as the user remains
within the effective range of the sensor.
If the user stays longer than 65 seconds,
a full flush will automatically initiate
when the user leaves.

3. Once a user is detected, if the user
leaves in 65 seconds or less, a reduced
flush will automatically initiate. The
circuit automatically resets and is ready
for the next user.

►► Sloan SOLIS® Dual Flush Flush Volume For RESS-CSloan SOLIS® Dual Flush Flush Volume For RESS-C

Retrofit ModelsRetrofit Models

The Flush Volume of the Sloan SOLIS® Electronic Dual Flush

Valve is controlled by the Flex Tube Diaphragm Kit.

SOLIS® Solar-Powered
Flushometer
SOLIS RESS-C-1.6/1.1

2016-12-05 Page 2 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com