Sloan 110-3.5 ES-S User Manual

►► Code NumberCode Number

3450147

►► DescriptionDescription

Exposed, Sensor Activated Sloan® Model Water Closet Flushometer,
for floor mounted or wall hung top spud bowls.

►► Flush CycleFlush Cycle

Model 110 ES-S Water Saver (3.5 gpf/13.2 Lpf)

►► SpecificationsSpecifications

Quiet, Exposed, Diaphragm Type, Chrome Plated Closet
Flushometer with the following features:

● ● PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed
Bypass

● ● Flush Accuracy Controlled by CID Technology

● ● Handle Packing, Main Seat, Stop Seat and Vacuum Breaker
Molded from PERMEX® Rubber Compound for Chloramine
resistance

● ● User friendly three (3) second Flush Delay

● ● Sweat Solder Adapter w/Cover Tube and Cast Wall Flange w/Set
Screw

● ● Courtesy Flush® Override Button

● ● OPTIMA® EL-1500-L Self-Adaptive Infrared Sensor with Indicator
Light

● ● Die Cast Sensor Plate with no visible Fasteners (for 2-gang
Electrical Box)

● ● High Back Pressure Vacuum Breaker Flush Connection with One­Piece Bottom Hex Coupling Nut, Spud Coupling and Flange for
1½” Top Spud

● ● Non-Hold-Open Integral Solenoid Operator, Fixed Metering
Bypass and No External Volume Adjustment to Ensure Water
Conservation

● ● Die Cast Solenoid Wall Cover Plate with no visible Fasteners (for 2­gang Electrical Box)

● ● 1. I.P.S. Screwdriver Bak-Chek® Angle Stop with Free Spinning
Vandal Resistant Stop Cap

Valve Body, Cover, Tailpiece and Control Stop shall be in
conformance with ASTM Alloy Classification for Semi-Red Brass.
Valve shall be in compliance with the applicable sections of ASSE
1037 and ANSI/ASME A112.19.2. Installation conforms to ADA
requirements.

►► ELECTRICAL SPECIFICATIONSELECTRICAL SPECIFICATIONS

Control CircuitControl Circuit

● ● Solid State

● ● 8 Second Arming Delay

● ● 3 Second Flush Delay

● ● 24 VAC Input

● ● 24 VAC Output

● ● 24-Hour Sentinel Flush

Sensor RangeSensor Range

● ● Nominal 22” - 42” (559 mm - 1067 mm) Self-adaptive Window: ±
10” (254 mm)

Solenoid OperatorSolenoid Operator

● ● 24 VAC, 50/60 Hz

TransformersTransformers

►► Automatic OperationAutomatic Operation

Sloan OPTIMA® equipped Flushometers provide the ultimate in
sanitary protection and automatic operation. There are no handles
to trip or buttons to push. The Flushometer operates by means of an
infrared sensor that adapts to its surrounding. Once the user enters
the sensor’s effective range and then steps away, the Flushometer
Solenoid initiates the flushing cycle to flush the fixture.

►► HygienicHygienic

User makes no physical contact with the Flushometer surface
except to initiate the Override Button when required. Helps control
the spread of infectious diseases. 24-Hour Sentinel Flush keeps fixture
fresh during periods of nonuse.

►► PracticalPractical

Solid state electronic circuitry assures years of dependable,
troublefree operation. The operational components of the
Flushometer are identical to a handle activated Royal®
Flushometer, proven by over 100 years of experience.

►► EconomicalEconomical

Automatic operation provides water usage savings over other
flushing devices. Reduces maintenance and operation costs.

►► FixturesFixtures

Consult factory for matching Sloan brand fixture options.

►► Compliance & CertificationsCompliance & Certifications

This space for Architect/Engineer Approval

Royal® Optima® Flushometers
ROYAL 110-3.5 ES-S

2016-13-05 Page 1 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com

● ● Sloan Part #EL-154 120 VAC, 50/60 Hz Primary 24 VAC, 50/60 Hz
Secondary Class II, UL Listed, 50 VA.

● ● Sloan Part #EL-342 240 VAC, 50/60 Hz Primary 24 VAC, 50/60 Hz
Secondary Class II, UL Listed, 50 VA.

►► ROUGH-INROUGH-IN

►► WIRING DIAGRAMWIRING DIAGRAM

One Transformer serves up to ten (10) OPTIMA Closet/Urinal

Flushometers. Specify number of transformers required

accordingly.

►► OPERATIONOPERATION

1. A continuous, invisible light beam is
emitted from the OPTIMA® Sensor.

2. As the user enters the beam’s
effective range (22” to 42”) the beam is
reflected into the OPTIMA® Scanner
Window and transformed into a low
voltage electrical circuit. Once
activated, the Output Circuit continues
in a “hold” mode for as long as the user
remains within the effective range of
the Sensor.

3. When the user steps away from the
OPTIMA® Sensor, the circuit waits 3
seconds (to prevent false flushing) then
initiates an electrical “one-time” signal
that operates the Solenoid. This initiates
the flushing cycle to flush the fixture. The
Circuit then automatically resets and is
ready for the next user.

►► ELECTRICAL BOX INSTALLATIONELECTRICAL BOX INSTALLATION

Failure to properly position the electrical boxes to the plumbing
rough-in will result in improper installation and impair product
performance. All tradesmen (plumbers, electricians, tile setters, etc.)
involved with the installation of this product must coordinate their
work to assure proper product installation. Installation Template
furnished with Flushometer.

To ensure a perfect rough-in, Sloan recommends the use of the EL­485-A Flushometer Electrical Box Positioning and Support Kit. Specify
and order the EL 485-A Kit separately. Consult factory for installation
details.

Royal® Optima® Flushometers
ROYAL 110-3.5 ES-S

2016-13-05 Page 2 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com