Slide Kamera HST-2 User Manual

Slide Kamera HST-2
Tripod

Pdf version of the manual available for download: www.slidekamera.eu

Extremely rigid, stable and reliable
Slide Kamera HST-2 tripod ideal
for indoor and outdoor applications.
Specially designed construction
allows to stabilize video heads
and Slide Kamera devices.
All components of the tripod
are made with high precision,
what ensures high rigidity
of the device.

1/2014

User Manual

Before you start your work with Slide Kamera HST-2 tripod we strongly recommend to read the manual
carrefully. Please note that using the device in a manner inconsistent with the instructions, unauthorized
repair attempts or any kind of modification of the device can cause a damage the manufacturer
is not responsible for.

Photos of products may slightly differ from the actual product due to constant modifications
and improvements introduced by the manufacturer.

Table of contents

1. Elements and construction of Slide Kamera Slide Kamera HST-2 tripod...................................................2

2. Additional accessories...............................................................................................................................3

3. Specification..............................................................................................................................................5

4. Product description....................................................................................................................................5

5. Setting up the tripod...................................................................................................................................6

5.1. Extending tripod legs..............................................................................................................................6

5.2. Spreader set-up......................................................................................................................................7

5.3. Setting up on uneven ground..................................................................................................................7

6. Mounting Slide Kamera HSTA-1 castor wheels to Slide Kamera HST-2 tripod.............................................7

7. Mounting devices on Slide Kamera HST-2 tripod........................................................................................9

8. .........................10

9. Maintenance............................................................................................................................................11

10. Transport...............................................................................................................................................11

11. Terms of warranty...................................................................................................................................12

Slide Kamera ®

High Engineering Technology CNC s.c.
Sebastian Pawelec Karol Mikulski
Glina 45
82-522 Sadlinki
Vat Identification Number: 581-188-33-32

Slide Kamera Office

80-175 Gdańsk (Poland)
Ul. Kartuska 386
tel./fax [phone]

e-mail: [e-mail] / [e-mail]
www.slidekamera.pl / www.slidekamera.eu

AF-24 adapter for mounting photo-video accessories on Slide Kamera HST series tripod

In case of damage of Slide Kamera HST-2 tripod during transport you are required to submit:

R proof of purchase
R protective styrofoam inserts/ fillers included in the set in case of new product delivery

1

Slide Kamera HST-2 Tripod

If you fail to comply with the abovementioned conditions, the manufacturer

reserves the right to refuse the complaint.

1. Elements and construction of Slide Kamera Slide Kamera HST-2 tripod

Once the shipment is received please make sure that all the elements of Slide Kamera HST-3 tripod

are inside.

Set includes:

R Slide Kamera HST-3 tripod with Slide Kamera HCZ 75mm or 100mm socket

R Self-aligning feet

R User Manual

If you purchase Slide Kamera HST-2 tripod with HSTA-1 castor wheels the set also includes:

R Slide Kamera HSTA-1 castor wheels with a brake

R

Construction of Slide Kamera HST-2 tripod

Three M10x30 screws

2

Slide Kamera HST-2 Tripod

5

6

8

9

7

11

10

1

2

3

4

5

8

11

1

HST-2 tripod crown with Slide Kamera HCZ 75mm or 100mm [1]
Tripod crown [2]
Slide Kamera HCZ socket [3]
Bubble level [4]
Clamping knob [5]
Tripod leg that consists of two double strut leg sections[6]
Carrying handle [7]
Spreader locking knob [8]
Slidable spreader [9]
Plastic fastening clamp [10]
Self-aligning feet [11]

castor wheels with a brake [12]
Brake [13]
Castor wheel mounting base [14]
Three M10x30 screws [15]

Slide Kamera HSTA-1

Slide Kamera HSTA-1 castor wheels with a brake

2. Additional accessories

Tripod sockets:

Slide Kamera HCZ-75/100mm socket (Manfrotto system) [1]
Slide Kamera HCZ-75/100mm socket (Miller system) [2]
Slide Kamera HCZ-75/100mm socket (Sachtler system) [3]

13

15

14

2

3

12

3

Slide Kamera HST-2 Tripod

Adapters:

Slide Kamera AF-18
Slide Kamera AF-16 quick mounting adapter [5]
AF-24 adapter for mounting photo-video accessories [6]

Half ball levelers:

Manfrotto MN520BALL 75mm [8]
Manfrotto MN500BALL 100mm [9]

leveling adapter [4]

4

Slide Kamera HST-2 Tripod

7

8

Bags:

Slide Kamera PSK-8 for HST-2 700 tripod [11]
Slide Kamera PSK-9 for HST-2 920 tripod [12]

Support:

HSTA-2 support for
Slide Kamera HST series tripods [13]

Quick mounting screw:
Slide Kamera HSZ-2 [9]

9

4

5

Wheels:
Slide Kamera HSTA-1 castor wheels with a brake [10]

6

11

10

12

13

5

3. Specification

4. Product description

Extremely rigid, stable and reliable Slide Kamera HST-2 tripod ideal for indoor and outdoor applications.
Specially designed construction allows to stabilize video heads and Slide Kamera devices. All components
of the tripod are made with high precision, what ensures high rigidity of the device. Slide Kamera HST-2 tripod
comes in two models and at the same time lengths: HST-2 700mm and HST-2 920mm.
Tripod is equipped with a bubble level and aluminium crown with 75mm or 100mm socket (one to choose
from). Aluminium legs of the tripod are equipped with self-aligning feet that allow to set and stabilize the tripod
on uneven ground. Additionally, the construction of our tripod allows to set the legs of the device on different
hights, what proves extremely useful on uneven ground, hills, stairs etc.

Minimum height:

Maximum height:

Leg sections:

Tripod socket:

Bubble Level:

Material:

Mounting accessories:

Weight:

Closed length:

Spreader:

Safety Payload:

Color:

Leg lock:

HST-2 700 700mm

HST-2 920 920mm

HST-2 700 1250mm

HST-2 920 1790mm

2

replaceable Slide Kamera HCZ sockets matching
systems such as Manfrotto, Sachtler, Miller

1

aluminium

Slide Kamera HCZ socket 75mm or 100mm,
Three M6 holes

HST-2 700 8,5kg

HST-2 920 11kg

HST-2 700 760mm

HST-2 920 1050mm

slidable

80kg

black

clamping knobs

Slide Kamera HST-2 Tripod

Two double strut leg sections provide extra stability and rigidity of the device. Each upper section comes
with two clamping knobs that allow for easy and stable adjustment of tripod hight as well as secure the legs
against uncontrolled folding. Slide Kamera HST-2 tripod has a slidable spreader equipped with three locking
knobs that help to set legs of the tripod accurately. Slide Kamera HST-2 tripod comes with plastic fastening
clamp in the set, that secures the legs during transport. When purchased with wheels, set also includes Slide
Kamera HSTA-1 castor wheels with a brake
Slide Kamera HST-3 tripod can be used with different types of video heads thanks to replaceable Slide
Kamera HCZ sockets matching systems such as Manfrotto, Sachtler, Miller. However, on client's request,
we are able to provide a socket for any type of video head.

5. Setting up Slide Kamera HST-2 tripod

Unpack Slide Kamera HST-2 tripod and unlock plastic fastening clamp that secures the legs during transport.
Place the device on a flat surface, if possible, unlock spreader clamping knobs [1] and spread the tripod legs.
If the setting suits your needs lock the clamping knobs.

5.1. Extending tripod legs

6

HST-2 700: 700mm-1250mm
HST-2 920: 920mm-1790mm

Slide Kamera HST-2 tripod features a quick and simple system
of extending the legs. Each upper section comes with two
clamping knobs [1] that allow for easy and stable adjustment
of tripod hight as well as secure the legs against uncontrolled
folding. In order set the tripod simply unlock the clamping
knobs and set the desired height of the tripod. Once you have
extended the legs remember to lockall the knobs. Depending
on the model Slide Kamera HST-2 tripod allows to set
photo-video equipment within the range:

11111111

Slide Kamera HST-2 Tripod

1

1

Having set the tripod always check if all clamping knobs are fastened.

It will prevent from uncontrolled folding of the tripod that may ultimately

lead to equipment damage.

7

5.2. Spreader set-up

In order to spread Slide Kamera HST-2 tripod legs unlock spreader locking knobs and set the legs in a desired
position. Slidable spreader allows for even and accurate spacing of the tripod legs therefore allowing
to achieve perfect stability of the device. Additionaly, each leg is equipped with markers that facilitate setting
the spreader. Once you have set the spreader properly lock the knobs.

5.3. Setting up on uneven ground

Aluminium legs of the tripod are equipped with self-aligning rubber feet with high fritcion coefficient that
allow to set and stabilise the tripod on uneven ground. Additionally, the construction of our tripod allows to set
the legs of the device on different heights, what proves extremely useful on uneven ground, hills, stairs etc.

6. Mounting Slide Kamera HSTA-1 castor wheels to Slide Kamera

HST-2 tripod

Slide Kamera HSTA-1 castor wheels with a brake allow to move the tripod comfortably without the need to
carry the device from one place to another. Wheels of 100mm diameter come with a specially designed wheel
mounting base that assures rigid and reliable attachment.

Slide Kamera HST-2 Tripod

8

Slide Kamera HST-2 Tripod

Standard version of Slide Kamera HST-2 tripod comes with self-aligning feet. In order to mount HSTA-1
castor wheels remove the feet from tripod legs. To make mounting more comfortable place the tripod
on the tripod crown.

Using M10x30 screws included in the set (6mm Allen key) attach wheel mounting base to the tripod leg. Insert
the screws in leg base.

Castor wheel housing is equipped with a brake that blocks the wheel and its rotational head using a strong
and reliable braking mechanism. It allows to achevie rigid and stable setting of the device on the ground.
It is also designed to function efficiently and smoothly with a minimum maintenance and care. In order to lock
the mechanism press the brake lever down to the ground.

Brake unlocked
Brake lever released

Brake locked
Brake lever pressed down

7. Mounting devices on Slide Kamera HST-2 tripod

Slide Kamera HST-2 tripod allows to mount various accessories in many configurations. You can mount
your equipment on the tripod, using either Manfrotto half ball or Slide Kamera HSZ-2 quick mounting screw
There is also a possibility to mount accessories directly to the tripod crown using three M4 or M5 screws.
Table below presents mounting configuration possibilities of Slide Kamera HST-2 tripod.

Mounting configuration possibilities of Slide Kamera HST-2 tripod

Slide Kamera HST-2 tripod comes with Slide Kamera HCZ 75mm or 100mm socket. Replaceable Slide
Kamera HCZ sockets match systems such as Manfrotto, Sachtler, Miller. We are able to provide a socket
for any type of video head on client's request. In order to mount devices directly on the tripod crown remove
Slide Kamera HCZ socket using 3mm Allen key.

Mounting method

Mounting accessory

Dedicated device

Mounting to Slide

Kamera HCZ socket

Manfrotto half ball

Slide Kamera HSZ-2 quick

mounting screw

Slide Kamera AKC-3 adapter

Slide Kamera heads
Slide Kamera AF-18 leveling adapter
Slide Kamera HKR-1, HKR-2, HKR-6

camera cranes

Slide Kamera S, SP, HSK series devices

Mounting directly

to Slide Kamera HST-2

tripod crown

Three M6 screws
Three M5 screws

Slide Kamera AF-16

quick mounting adapter

Slide Kamera HKR-1, HKR-2, HKR-6

camera cranes

Slide Kamera heads
Slide Kamera AF-18 leveling adapter

9

Correct and detailed description on how to mount individual products on Slide Kamera

HST-2 tripod can be found in User Manuals of these products.

In order to avoid any improper assembly or handling please refer to User Manuals

of individual products before you mount them on Slide Kamera HST-2 tripod.

Slide Kamera HST-2 Tripod

7.
HST series tripods

Adjustable Slide Kamera AF-24 adapter allows to mount
additional photo-video accessories equipped with 1/4" or 3/8"
thread on Slide Kamera HST series tripod, thus increasing the
functionality of our tripod. Slide Kamera AF-24 adapter
consists of a mounting plate, fixing plate and a clamping lever
that connects the plates. Mounting plate is equipped with two
hardened inserts with 3/8" holes and 1/4" hole. There are also
two M6 holes for mounting the clamping lever in two positions
(top or bottom).

Elements of Slide Kamera AF-24 adapter for mounting additional photo-video accessories

Clamping lever with M6 thread [1]
Fixing plate [2]
Mounting plate [3]
M6 thread [4]
M6 holes for mounting the lever [5]
1/4" threaded hole [6]
Hardened insert with 3/8" hole [7]

AF-24 adapter for mounting photo-video accessories on Slide Kamera

1

4

2

3

Mounting plate

Fixing plate

Clamping lever

5

5

6

7

7

Slide Kamera HST-2 Tripod

10

In order to mount AF-24 adapter on Slide Kamera HST series
tripod attach the plates to tripod leg and connect them
with a clamping lever. Adapter can be mounted either
with a mounting plate facing the inside or outside of the tripod.
Additionaly AF-24 adapter can be mounted on the entire length
of the tripod leg.

9. Maintenance

R By maintenance we understand cleaning the device
R Periodically tighten all screws to ensure maximum stability
R Elements of the tripod do not require any lubrication
R Do not overload
R Use a soft cloth to clean. Never use abrasive or caustic products, which could cause

the damage of protective coatings

R To remove any impurities, you can use compressed air
R To clean the device you can use ear stick with cotton bud
R Transport and store your tripod in a dedicated Slide Kamera cover

10. Transport

Slide Kamera manufacturer recommends to transport Slide Kamera HST-2 tripod in Slide Kamera PSK
seriescovers that allows to carry the device safely, in any way so that it is protected against any damage.
Coverdimensions allow to transport the tripod with video head, Slide Kamera head mounted or HSTA-1 castor
wheels attached. There is no needto remove the accessories. Slide Kamera PSK cover is made
of waterproof polyester fabric of high durability, resistant to abrasion and weather conditions. It is equipped
with inside straps that secure the tripod during transport.

11

Any changes in design and repairs are made only and exclusively by the manufacturer.

Failure to comply with the recommended guidelines outlined in this manual

will result in loss of warranty.

Slide Kamera HST-2 Tripod

Dedicated cover

Cover length

Slide Kamera HST-2 700 tripod

Slide Kamera PSK-8

1000mm

Slide Kamera HST-2 920 tripod

Slide Kamera PSK-9

1300mm

Slide Kamera HST-2 Tripod

12

11.

All Slide Kamera products are covered manufacturer's warranty for a period of 12 months from the date
of sale. Warranty covers any design faults or of the material of the product which resulted in the product
malfunctioning. The warranty covers the repair, or, if the repair proves impossible, replacement of the product
with a new one. Hovewer, the cost of repair of the product cannot overrun the catalogue value of the product.
The warranty does not cover damage and / or product defects resulting from the improper usage, as well as
not following product maintenance specifications..

The warranty excludes:

R unauthorized attempts to repair or modify
R mechanical damage caused during transport and operation of such features, scratches, dents,

pits, dirt, etc ...

R flooding, moisture

To obtain warranty service the purchaser should deliver the damaged product together with a proof
of purchase and proof of payment (invoice, cash register receipt). The product will be accepted for warranty
service on condition that it is delivered with correctly filled in complaint form and properly protected during
transport. You can download the complaint form from: www.slidekamera.pl / www.slidekamera.eu.
After the warranty period is exceeded any spare parts can be purchased directly from the manufacturer
or in any selected points of sale.

PLEASE NOTE:
Any package sent at the expense of HET-CNC s.c., 80-175 Gdańsk, Ul. Kartuska 386 will not be received.

Terms of warranty

Slide Kamera HST-2 Tripod

13

Statyw Slide Kamera HST-2

14

Statyw Slide Kamera HST-2