Page 1
www.SleepPhones.com
1. TURNING ON YOUR SLEEPPHONES® SIMPLE MODULE
- Find the button on the SleepPhones® Simple module
located inside the headband.
- PRESS and HOLD the button for 3 seconds until you hear
“power on” through the speakers.
2. OPERATING INSTRUCTIONS
VOLUME: Click the button on the SleepPhones® Simple module
to change the volume. Each click will increase or decrease the
volume by 15%.
NEXT SONG: Double-click the button to skip to the next song.
TIMER: The default timer is 1 hour. To change the amount of
time a song plays, a long click followed by a short click will
advance the timer options. Each timer option will announce
on the speakers. For example, you will hear, “2 hours until
automatic power off.”
Timer options are:
30 minutes: will play your favorite track for 30 minutes
1 hour: will play your favorite track for 1 hour
2 hours: will play your favorite track for 2 hours
8.5 hours: double click to advance to the next track to nd
the best track that you prefer and you can listen to your
favorite for 8.5 hours
Play once then power off: will ow through all 17 tracks
which are 30 minutes each and power off when it reaches
the last track
Play until batteries are low: will also ow through all 17
tracks, but will keep playing until the battery dies
POWER OFF: The SleepPhones® Simple will turn off
automatically according to the timer option.
To turn off the module manually, PRESS and HOLD the button
for 3 seconds until you hear “power off.”
Once set, the system remembers your favorite volume, song and
timer option. It would be possible to use the SleepPhones®
Simple with a simple press of the button each night.
Quick Start Guide
Page 2
www.SleepPhones.com
3. CHARGING INSTRUCTIONS
- Disconnect your speakers from the SleepPhones® Simple module.
- Plug in the micro-USB cable into the charging port of the
SleepPhones® Simple module.
- Plug the other end of the cable into a standard USB port
(such as a computer, TV, or wall USB charger).
While charging, there will be a pulsing red
light next to the raised button in the center
of the SleepPhones® Simple module.
When fully charged, it will change to a
solid red light. Reconnect the speakers
back into the SleepPhones® Simple
module via the micro-USB port.
Quick Start Guide
AS-SL-US-QUICK-01
Loading...