Sleepace Dot Quick Setup Manual

Sleepace Dot

Quick Setup Guide

FCC statements:

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2)this device must accept any interference received, including interference

that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference

caused by unauthorized modifications or changes to this equipment. Such

modifications or changes could void the user' s authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

01 Device Description

Contents：

1、Sleep Dot 2、Battery 3、Manual 4、Plectrum

02 Installation Guide

Please open the back cover with the help of the included plectrum (see reference

picture),insert the battery with the positive pole facing up and close the device. If the

LED is blinking green the battery is installed correctly; if the LED is blinking red, the

battery is low and needs to be changed

03: Instruction 使用说明
① Installation of APP

There are two ways to download the Sleepace APP:

A、Scan the QR Code

B. Search “Sleepace” in GooglePlay or iTunes store for download

You will need a smart phone with Bluetooth 4.0 that supports IOS7.1 or later or Android

4.3 or later.

※ Please connect Sleep Dot according to the reminders in App after downloaded

②Registration

Log into your Sleepace App and register your account following the prompts
③Position

Slide the magnetic cover off, clip your Sleep Dot to the corner of your pillowcase and

snap the magnet back on

Note: The thickness of your pillowcase should be less than (0.08) inches

④Power On, Connecting and Monitoring

Tap the front or lightly shake your Sleep Dot twice to activate it. Once the green LED

lights up and starts blinking, please connect your Dot via Bluetooth and set your

automatic monitoring time from your Sleepace App. Please note: Do not try to connect

to your Bluetooth through your phone, but do it through the App once it prompts you to

do so
⑤Checking Your Daily Report

Login to your Sleepace App, tap the front or shake your Sleep Dot twice. Once the green

LED starts blinking, click the “ “ button in the top right corner of your App’s
monitoring page. The App will sync your data and you will be able to check your daily

report

※The Sleep Dot only can store data for latest 7 days. Please make sure to sync your data at least

every 6 to 7 days

04 LED Indicator

Status

Display

Power On

Green LED blinking

Connected to Bluetooth

Green LED On, will turn off once

successfully connected

Low Battery

Red LED blinking

※The Sleepace App will alert you once the battery power is less than 10%.Please make sure to

change the battery in time

05 Specifications

Model

B501

Size

1.3 x 1.3x 0.52 inches

Weight

0.53oz

Color

White

Wireless

Bluetooth 4.0

Wireless Range

33ft indoors

Battery

CR2032button battery

Battery Life

3 months

Operating System

Android4.3or later, iOS7or later

06 Safety Notice

 Do not attempt to disassemble, service or modify the product - there are no

user-serviceable parts inside

 Do not place your Sleep Dot near a fan, speaker or other vibration source during monitoring,

as it will affect the accuracy of your data

※This product is NOT a toy or a medical device

07 Warranty

For more information on the product, warranty or service questions, please go to

www.sleepace.com

Shenzhen Medica Technology Development Co.,Ltd.

Tel:[phone] Email:[e-mail]

Web:www.sleepace.com Fax:[phone]

Add: 2F Build A,Tongfang Information Harbor,No.11,

East Langshan Road,Nanshan District ,Shenzhen,R.P.China

Regulatory Conformance

Hereby, Shenzhen Medica Technology Development Co., Ltd. declares that this device is in

compliance with the essential requirements and other relevant provisions of Directive

1999/5/EC.

For the declaration of conformity, visit the Web site

http://www.mysleepace.com/

Notice: Observe the national local regulations in the location where the device is to be used. This

device may be restricted for use in some or all member states of the European Union (EU).