Skyworth Wireless Technology M1703 Users manual

MID

MODEL: M1703

USER MANUAL

Preface

Thank you for buying the MID. We wish you enjoy using it.
Please read and retain all the operating instructions before operating the unit, we do not assume
any liability arising out of improper ope ration or incidental damages.
For better services, the content of this operation manual may be changed.
If the actual setup and usage of the unit are different from this operation manual, please view
the website of our company to inquire about the late st product information.

Do not allow water or foreign objects to enter the unit.

1

I. Note:

1. Avoid the unit being dropped. Avoid the display been shake seriously, or the display

will be damaged or unusual.

2. Do not use metal object to touch the device to prevent it from short circuit.

3. Please backup your data in case your important data is lost, especially before you

upgrade the firmware. The company will not take charge in any loss that caused by
lost of data.

4. Do not disassemble. Do not wipe the surface of the unit by alcohol, thinner or

benzene.

5. Do not disconnect the unit while it is formatting or uploading/downloading, or the

procedures may lead to errors

6. We do not take responsibility to the flash damage caused by product broken, repair or

other reasons. Please operate strictly as per the user guide.

7. Avoid water or foreign objects enter the unit.

8. Do not use the unit in places that are extremely hot, cold, dusty, or humid.

9. Avoid the unit being dropped. Avoid the display been shake seriously, or the display

will be damaged or unusual.

10. Specifications are subject to change and improvement without notice

2

II. Introduction of cover:

3

III. Operation Instruction

1. Basic Operation

1.1. Power on/Power off

Power on:
Press and hold the power switch for 3 seconds; the unit displays the start-up logo
and enters the working mode.
Power off:
Press and hold the power switch for 3 seconds to turn the unit off.
Sleep:
While the device is at working status, press the power switch, it enters the sleeping
mode, and the screen will be off then. Press the power switch again, it shift to the
normal mode. You may use this function when you don’t’ use the device temporary
to save power.

1.2. Charging

When the device prompts low battery, please charge it by provided charger.

Note:
To improve the longevity of the battery, you may charge for another 15
minutes after it prompts the battery is full.

1.3. Main menu

4

Click the icon in the main interface, the main menu is appeared. It
including the system setting, music playback, video playback, web browser and other
applications you installed in the main menu.

2. Settings

Click “ ” in the main interface to enter the setting interface. Click the

corresponding setting items to operate.

5

6

7

2.1．Date and Time Setting

Click “Date & Time” in the setting interface to set the date and time. You may set
the date, time zone, time, time format and date format etc. in the menu.

8

2.2. Brightness

Select “Display” in the setting interface. Click “Brightness” to enter, and slide the
bar to adjust the brightness.

9

3. Wi-Fi connection

Click “Settings” in the main interface and click “Wireless & network” to enter the
wireless and network setting interface. Click Wi-Fi to turn on the WIFI. Click Wi-Fi
setting to set and manage wireless access.
Click “Network Notification”, it lists the open network it searched. Click the name
of the network; it pops up the setting window. You may connect it to WIFI according to
the prompts. You need to input the user name and password if networks are encrypted.

10

3.1 Ethernet configuration
The Unit support USB-Net-Card.

4. Install, Uninstall and Run applications

4.1 Install

11

There are many ways to install applications under Android, such as via USB, by
third party program. We introduce installation by Apps Installer here.
Click the “File Manager” in the main interface.
Select the APK file you want and enter the application installation interface. Click
“Install” to install the application automatically. After installation, it prompts “Open” and
“Finish”. Click “Open” to open the application. Click “Finish” to exit.

4.2 Uninstall

You may use the corresponding third party software management tool or the
installed application management software of the device to install applications.
Select “Setting/Applications/Manage applications” to select the installed
applications and check the attribute of it or uninstall it.

5. Connect to internet

5.1. After connecting with WIFI, open the browser and input the web address, you can

browse the web then.

5.2. Click the
web page you want to open it.

To save the web page into bookmark, you may click

icon to enter the bookmark to view the browse history. Click the

to enter and click “add”

12

to save it.

6. Audio and video playback

6.1. Audio playback

Click the “Music” in the main menu to enter the audio playback interface. It lists
the audio files in the device, and you may click the file name to play it. in the audio
playing interface, click the icons to play/pause/ increase volume/ decrease voluem/ FF/
REW….

13

6.2. Video Playback

Click the “2160P(Gallery)” in the main menu to enter the video playback interface.
It lists the video files in the device, and you may click the file name to play it. in the
video playing interface, touch the screen to pop-up the operation icons and click the
icons to play/pause/ increase volume/ decrease volume/ skip to next file/skip to previous
file….

14

7. Picture viewing

Click in the main menu to enter the picture folder list. Select and click the folder
you want to enter, it displays the . click the thumbnail of the picture to view it.

Touch the screen to pop-up the oper ation icons while viewing the picture, you may
zoom in/zoom out/ skip to next picture/skip to previous picture/ rotate/ delete the
picture…

15

8. 3G DONGLE

The device supports external 3G Dongle, connect the 3G dongle to the device via the
external transfer cable, after the dongle indicator lights, you may use the 3G network
normally.

16

9. Camera

Click “Camera” in the main interface.

9.1 Camera

17

If the cursur is at postion, the device is at Camera mode.
Click
Click

Click
Click

to take picture.
to set the scene mode, Picture size, Picture quality, and color effect.

to set white balance.

to select back or front camera.

9.2 DV If the cursur is at
Click
Click

Click

to take picture.
to set the color effect or restore to default settings.

to select back or front camera.

postion, the device is at DV mode.

18

10. Connect with external device

10.1. Connect with PC

Connect the device with the PC via the USB cable. The PC appears two new disk
symbols after connected successfully. One is the TF card, and the other is the built-in
flash.

19

10.2. Use of OTG and USB host

It supports the movable device with FAT32 format, such as U disk and MP3.
Connect the movable device to the MID. (Note: only OTG could support USB mouse
and keyboard, USB HOST only support USB2.0 High speed device)

20

10.3. Applications

21

For convenient usage, we installed some third party software in the MID. For detailed
operation methods, please check the corresponding instruction. Some of the software
may be able to be used in some area because of network service.

IV. Troubleshooting

1. What if the device is abnormal during operation?

Answer: 1). Reboot the device to see if it works OK.

2). Charge the device by the charger to activate the battery. Make sure it has
power before you operate it.

3). It is suggested to upgrade the OS of the device by professional.

2. Why the standby time is so short sometimes?

Answer: the use time of the battery is all depend on the temperature and use instance. If
the temperature is too high or too low, the use time of the battery might be effected. It is

22

suggest using the device in normal temperature.
The using time is also affected by increased volume and frequently operation.

23

VI. Specifications

24

FCC Notice

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
and can radiate radio f requency energy and, if not in stalled and used in accord ance with the
instructions, may cause harmfu l interference to radio communication s. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to r adio or television reception , whi ch can be determined by turning
the equipment off and on, the user is encouraged to try to correct
The interference by one or more of the f ollowing measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to which the

25

receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This d evice must ac cept an y in terfer ence re ceived , incl udi ng in terf erence th at may c ause

undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. such modifications could void the user’s
authority to operate this equipment.

26