Skyworth SLC-1369A-3, SLC-2269A-3 User Manual

USER’S MANUAL

13"LCD HDTV/DVD COMBO

SLC-1369A-3

1

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.

This symbol indicates important instructions accompanying the product.

WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus must not be exposed to dripping or splashing. Objects filled with liquids, such as vases or drinking glasses, must never be placed on the apparatus.

This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury.

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

Important Safety Precautions

2

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection

against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna- discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrode. See following example.

16. Mains plug is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. This apparatus shall be connected to a mains socket outlet with a protective earthing connection.

ELECTRIC SERVICE EQUIPMENT

NEC-NATIONAL ELECTRICALCODE

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250 PART H)

GROUND CLAMPS

GROUNDING CONDUCTORS (NEC SECTION 810-21)

ANTENNA DISCHARGE UNINT (NEC SECTION 810-21)

ANTENNA LEAD IN WIRE

Important Safety Precautions

3

Table of Contents

4

Table of Contents

Time Setup

Troubleshooting

26 26

32

30

Introduction

Features Specifications

5

6

Accessories General Description

Overview of front and side panel Overview of back panel Overview of remote control

Installing Batteries in the Remote Control

7 7

8

9

10 13

External Connection Antenna connection Connecting VCR

Connecting DVD Player/Set-Top Box

Connecting DVD Player/Set-Top Box via HDMI Connnecting Digital Audio System Connecting Amplifier/DVD Home Theater Connecting PC

14

15

16

17

18

13 13

Menu system introduction

Picture

Sound

Channel

22

23

24

Input Setup

Supporting signals Basic operation Turning the TV On and Off

Channels Selection Volume Adjustment and Mute Setup

EPG Menu

18

19

20

21

DVD Part-BASIC OPERATION

Lock

28

Current Channel in formation

21

5

Input terminals used for external equipment connection

One ANTENNA jack

One computer VGA/PC input One outputCOAXIAL One COMPONENT inputs One HDMI inputs One AV inputs One AUDIO output

l TV adopts 13" LCD display screen l HDTV Compatible( 480p,720p, 1080i, 1080p) l Support American TV Standard 8VSB/Free 64/256QAM,NTSC System, ATSC System l Connect to computer directly to realize TV/monitor combo. l Zero X radiation complies to green environment protection requirement l Advanced Chroma Processing l Closed captioning/PARENTAL LOCK l SAP/STEREO/MONO; BTSC. l HDMI inputs l Support COAXIAL ouput

W arnings

Features

Introduction

6

Note:

Introduction

W arnings

Specifications

Design and specification modification maybe made at any time without prior notice; all data and dimensions are approximations.

mm

Fine digital control

NTSC3.58

75 (Unbalance)

5W x 2

25W

1280X800

SLC-1369A-3

Color active matrix LCD display

350mm X116mmX380mm

2.1Kg

NTSC System, ATSC System

Antenna: 2~69; Cable: 1~135 (Analog: 1-125, Digital: 1-135)

DC 3V (Two AAA size batteries)

o

0C-40C

o

IN Put

Out Put

Ada pter re quire ment

DC 12V 3A:

MOD EL

13”

(Max)

7

Remote Control &

Batteries (AAAx 2)

Please make sure the following items are included with your LCD TV. If any items are

missing, contact your dealer.

Owner’s

Instructions

Accessories

8

SPEAKER REMOTE CONTROL SENSOR Aim the remote control towards this spot on the TV. POWER INDICATOR Green: In power on mode. Red: In standby mode. INPUT Toggles between all the available input sources ( TV,AV, DVD,COMPONENT,

HDMI, VGA)

MENU Press to see an on-screen menu of your TV's features.

CH+/ Press to change channels.

In the on-screen menu, use the CH +/ buttons as up/down arrow buttons. VOL+/ Press to increase or decrease the volume.

In the on-screen menu, use the VOL +/ buttons as left/right arrow buttons. Standby button Press button to toggle between normal and standby mode.

General Description

Overview of front and side panel

Press button on the side

panel or

After placed a disc in the disc tray, press button to play the disc,and press button twice to pause.

SOUND PICTURE

RECALL

DISPLAY

EJECT PAUSE/PLAY

OSD STOP

STEUP

SF

DVD MENU

B.MARKRANDOM

REPA-B

REPEAT

S.TITLE

GO TO

ANGLE CLEAR

PBC AUDIO

PROGRAM

D.ZOOM

ENTER

CH

+

CH

-

V+

POWER

CH.LIST FAV.LIST

EPG

MENU

ZOOM

EXIT

/

---

MTS CC

HDMTV

VOL- VOL+CH- C H+

MENU I NPUT

/

9 1 0

on the remote controller.

9

10

9

HDMI Connect to the HDMI jack of a device with an HDMI output. VGA/PC IN Connect to the video output jack on your PC.

PHONE OUT Connect a set of phone for private

COMPONENT Connect Component video.

COMPOSITE VIDEO Video input for external devices, such as a camcorder or VCR.

General Description

Overview of back panel

COMPOSITE COMPONENT AUDIO Audio inputs for external devices.

AUDIO OUT Connect to the audio output jacks on your amplifier/home theater.

COAXIAL

Connect to a Digital Audio devices.

ANT Connect to an antenna or cable TV system.

10

Overview of remote control

General Description

11."-/--, ." Button In TV mode, press this button and input the channel number which you want to select.

12.AV/TV/DVD Button

Press this button to display the input source such as

"TV”, "AV”, " ”, "Component" ,"HDMI" and "VGA"DVD

13. CH. LIST Button Press this button to display the channel list in TV mode.

14.VOLUME+/VOLUME- (V+/V-) Buttons Press these buttons to increase or decrease the volume.

TV MODE:

1.POWER Button( ) Press this button to turn the TV on or into standby mode.

2.MUTE Button Press this button to mute the sound and the sign of mute will appear all the while if you do not press again. But the sign of mute will disappear if the CCD is displayed.

3.SLEEP Button Press this button to set the sleep timer. When the preset length of time has passed, the TV set enters standby

60、90 、 120、180 、240 minutes.

4.SOUND Button Press this button to select desired sound mode. Four sound modes are available including Standard, Music, Movie and Personal.

5.PICTURE Button Press this button to select desired picture mode. Four picture modes are available including Standard, Soft, Dynamic and Personal.

6.RECALL Button This button is used to return to the previous channel

7.MTS Button W hen stereo program is received, press this button to switch sound system between mono and stereo. When SAP program is received, press this button to switch sound system between mono and SAP. When stereo and SAP program is received, press this button to switch among mono, stereo and SAP.

8.CC Button

9. ButtonDISPLAY

Press this button to display the information on current

input.

10.NUMBER (0-9)Buttons Press these buttons to enter digits. These buttons for direct access to use a channel to enter channel number for both ATV and DTV or enter password for Parental lock.

1

3 6

10

11

5 9

4

8

2

7

12

16

18

23

22

13

14

15

17

19

20

21

5、

10、

45、30、

PHONE

10

listening

DC12V IN

Connect the supplied power

UP/DOWN button select item and press

Using

ENTER button to enter selected item.

or

RIGHT

This button doesn’t Look in this model

SOUND

PICTURE

RECALL

DISPLAY

EJECT

PAUSE/PLAY

OSD STOP

STEUP

SF

DVD MENU

B.MARK

RANDOM

REPA-B

REPEAT

S.TITLE

GO TO

ANGLE CLEAR

PBC

AUDIO

PROGRAM

D.ZOOM

ENTER

CH

+

CH

-

V+

POWER

CH.LIST FAV.LIST

EPG

MENU

ZOOM

EXIT

/

-- -

MTS

CC

HDTV

.

10

( / )

SLEEP

P.MODE

S.MODE

LIST

1 2

3

SOURCE

+-./

ABC DEF

DTV

13

Installing Batteries in the Remote Control

Installing BatteriesInstalling Batteries

1

Open the battery compartment cover on the back side.

2

Insert two 1.5V AAA size batteries in correct polarity. Don´t mix old or used batteries with new ones.

3

Closed the cover.

Point the remote towards the remote control sensor of the wireless TV and use it within 7 meters.

Put the used batteries into the recycling bin since it can negatively affect the environment.

Universal Remote Control operation please refer to Appendix 2.

General Description

Battery

Cover

2xsize AAA 1.5V

Battery Cover

Antenna connection

Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the antenna jack. For details Please refer to the following drawing.

Use a 75ohm - 300ohm converter

300ohm coaxial cable

Antenna feeder

ANT IN

75ohm coaxial cable

Antenna cable

Antennas with 300 W flat twins Leads

Antennas with 75 W Round Leads

External Connection

Connecting VCR

14

These instructions assume that you have already connected your TV to an antenna or a cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable system.

5

VCR Rear Panel

4

3

Audio Cable (Not supplied)

Video Cable (Not supplied)

RF Cable (Not supplied)

Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape. Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. We recommend the use of cables with a Ferrite Core.

1. Unplug the cable or antenna from the back of the TV.

2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.

4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the VIDEO IN jack on the TV.

5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AUDIO L and AUDIO R jacks on the TV. If you have a mono (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

TV Rear Panel

PHONE

The batteries shall not be eposed to ecessive heat such as sunshine

fire of the like.

and the AUDIO OUT jacks on the DVD player.

the TV and the COMPONENT [Y, PB, PR] jacks on the DVD player.

External Connection

Connecting DVD Player/Set-Top Box via HDMI

This connection can only be made if there is a HDMI Output connector on the external device.

What is HDMI? HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression. Multimedia interface is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel digital audio. Each DVD player/STB has a different back panel configuration. We recommend the use of cables with a Ferrite Core.

1. Connect an HDMI Cable between the HDMI connector on the TV and the HDMI connector on the DVD player/Set-Top Box.

TV Rear Panel

HDMI Cable (Not supplied)

DVD Player/Set-Top Box

Connecting DVD Player/Set-Top Box

The rear panel jacks on your TV make it easy to connect a DVD to your TV.

Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also. Each DVD player/STB has a different back panel configuration. When connecting a DVD player/STB, match the color of the connection terminal to the cable. We recommend the use of cables with a Ferrite Core.

1. Connect a Component Cable between the COMPONENT IN [Y, PB, PR] jacks on

2. Connect Audio Cables between the COMPONENT IN [RAUDIO-L] jacks on the TV

TV Rear Panel

Audio Cable (Not supplied)

2

Component Cable (Not supplied)

1

DVD Player/Set-Top Box

15 16

External Connection

PHONE

External Connection

Connecting Digital Audio System

The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.

5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH. We recommend the use of cables with a Ferrite Core.

1. Connect an COAXIAL Cable between the SPDIF jacks on the TV and the Digital Audio jacks on the Digital Audio System. When a Digital Audio System is connected to the Input SPDIF terminal: Decrease the gain (volume) of the TV, and adjust the volume level with the system's volume control.

TV Rear Panel

COAXIAL Cable (Not supplied)

Digital Audio System

Connecting Amplifier/DVD Home Theater

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable. We recommend the use of cables with a Ferrite Core.

1. Connect Audio Cables between the AUDIO L and R OUT on the TV and AUDIO IN [R AUDIO-L]on the Amplifier/DVD Home Theater. When an audio amplifier is connected to the AV OUT [R-AUDIO-L] terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Amplifier's volume control.

TV Rear Panel

Audio Cable (Not supplied)

Amplifier/DVD Home Theater

Connecting PC

Each PC has a different back panel configuration. The HDMI jacks do not support PC connection. We recommend the use of cables with a Ferrite Core.

1. Connect a D-Sub Cable between RGB/PC IN connector on the TV and the PC output connector on your computer.

TV Rear Panel

D-Sub Cable (Not supplied)

PC

1

External Connection

17

18

2.Plug PHONE out connector into PHONE out jack on the TV the TV speaker will

be muted.

2 Phone Out

Supporting signals

PHONE

102 4X768

Menu operation

1

Input Setup

Press AV/TV/DVD key on the remote control to enter "INPUT SOURCE" menu. There are five options for you to select:

Use ▲/qkey to move the cursor to the input you desired and press ENTER key to confirm.

Channels Selection

There are four ways to select channel:

1) Using 0~9, and keys on the remote control to select channel directly.ENTER

2). Using CHr/s key on the remote control or on your TV to select channel.

3) Press PRE.CH key to turn to previous channel, press it again to return to current channel. Note: PRE.CH is not activated if no channel has been changed after TV turning on.

4) Select channels from "All Channels List" or "Favorite Channels List".

Volume Adjustment and Mute Setup

Volume adjustment

Press VOL +/- key on the remote control or on the TV to display "Volume" menu,

adjust the volume of TV between 0 to 100 by using VOL key:+/-

( To increase the volume, press VOL + key; ( To decrease the volume, press VOL - key;

Mute

Press MUTE key on the remote control to display mute icon on the left bottom of the screen, and the volume of TV will be turned off, press MUTE key again to turn on the volume. Mute can be canceled by using one of the methods below:

( Mute will be canceled if you press MUTE button again. ( Mute will be canceled if you press VOL + key.

2

Basic Operation

3

19

20

Turning the TV On and Off

1. Insert the power cord plug into a polarized AC outlet.

2. Press POWER button on the remote control or button on the LCD TV.

3. Normal picture will be displayed on the screen after 6 seconds. If no signal input, "No Signal" will be displayed on the screen.

4. If temporary POWER off is required, press POWER button on the remote control or button on the LCD TV.

5. If you want to completely switch off the power for this unit, unplug the power cord plug for this unit.

6. After switching off the unit, you should turn on the TV again at least 5 seconds later.

Status indication lamp Green: In power on mode. Red: In standby mode.

Auto power -off If there is no signal input in any Mode, the TV will automatically accesses the standby state in about 15 minutes.

Memory before turning TV off The settings of picture and the preset channels will be memorized at turning off the unit. When being started up again, the unit will work according to the mode set before being turned off.

1

How to turn the TV on or off

Basic Operation

"TV", "DVD", "AV", "Component","HDMI",and "VGA”.

AV

Component

DVD

To use Car cord Use the Car Cord provided for operation on 12V DC.

polarized AC outlet, do not

the blade. It is the user s responsibility

to have

an electrician replace the obsolete outlet.

3.If you cause a static discharge when touching

the unit, and the

unit fails to function, simply

unplug the unit from

the AC outlet, wait

a few

minutes, and plug it back in. The unit should

return to normal

NOTE:

1.AC/ DC adaptor provided can be connected to

the specified

2.If the polarized AC cord does not fit into a non

NC

voltage (AC 110 volts 60HZ).

attempt to file or cut

operation.

TV

HDMI

VGA

Menu operation

Basic Operation

Current Channel Information

Press INFO key on the remote control to display the following OSD, the indications of items in this OSD are listed in the following table.

EPG Menu

Press EPG key to enter "EPG" menu, the first line displays current channel number channel name, event title and current time.

The second line displays all programs which will be displayed in this channel, press t/u key to select the program you desired, then press key to enter this program ENTER to watch.

4

5

Picture

Press MENU key to display the main menu on the screen, use key to select "Picture" option, t/u then press or q key to enter "Picture" ENTER submenu.

1. Picture mode In "Picture" submenu, use key to move the ▲/▼ cursor to "Picture Mode" option to set the mode of video picture. Use key to select one t/u picture mode from four modes: "Standard", "Dynamic”, "Soft" and "Personal".

2. Contrast

In "Picture" submenu, use ▲/▼ key to move the cursor to "Contrast" option, then press t/u key to adjust the value.

3. Brightness

In "Picture" submenu, use ▲/▼ key to move the cursor to "Brightness" option, then press t/u key to adjust the value.

6. Sharpness In "Picture" submenu, use ▲/▼ key to move the cursor to "Sharpness" option, then press t/u key to adjust the value.

5. Tint

In "Picture" submenu, use ▲/▼ key to move the cursor to "Tint" option, then press t/u key to adjust the value.

4. Color

In "Picture" submenu, use ▲/▼ key to move the cursor to "Color" option, then press t/u key to adjust the value.

7. Color Mode

In "Picture" submenu, use ▲/▼ key to move the cursor to "Color Mode" option, then press t/u key to select one color mode from:"Normal", "Warm", "Cool".

Picture

Menu system instruction

21

22

Sound

Press MENU key to display the main menu on the screen, use t/u key to select "Sound" option, then press ENTER or ▼ key to enter "Sound" submenu.

1. Sound Mode In "Sound" submenu, use ▲/▼ key to move the cursor to the "Sound Mode" option, then use t/u key to select one mode from following four modes: "Standard", "Music", "Movie”

and "Personal".

2. Bass In "Sound" submenu, use ▲/▼ key to move the cursor to the "Bass" option, then use t/u key to adjust the value.

3. Treble In "Sound" submenu, use ▲/▼ key to move the cursor to the "Treble" option, then use t/u key to adjust the value.

4. Balance In "Sound" submenu, use ▲/▼ key to move the cursor to the "Balance" option, then use t/u key to adjust the value.

5. Surround In "Sound" submenu, use ▲/▼ key to move the cursor to the "Surround" option, then use t/u key to select "On" or "Off".

6. AVC In "Sound" submenu, use ▲/▼ key to move the cursor to the "AVC" option, then use t/u key to select "On" or "Off".

7. SPDIF Type Only when the input source is DTV , the function of SPDIF Output is available. In "Sound" submenu, use ▲/▼ key to select "SPDIF" option. There are two modes for you to select:"RAW" and "PCM". Use t/u key to select the mode you desired.

8. Audio Language In "Sound" submenu, use ▲/▼ key to move the cursor to the "Audio Language" option, there are three options for you to select: "French", "Spanish" and "English". Press t/u key to select the language you desired.

Sound

Menu system instruction

Channel

Press MENU key to display the main menu on the screen, uset/u key to select "Channel" option, then press or ▼ key to enter ENTER "Channel" submenu.

1. Antenna In "Channel" submenu, use ▲/▼ key to move the cursor to "Antenna" option. There are two options for you to select:"Cable" and "Air", press t/u key to select the Antenna type you desired.

2. Auto Scan In "Channel" submenu, use ▲/▼ key to select "Auto Scan", then press or u ENTER key to enter "Auto Scan" submenu.

1) Use ▲/▼ key to select "Cable System", If you have selected "Cable" in "Antenna", there are four options for you to select: "AUTO", "STD", "HRC" and "IRC". Press t/u key to select the option you desired.

2) Then use ▲/▼ key to select "Auto to Scan", press key or u key to start ENTER searching. If you want to stop searching, just press EXIT key.

4. Favorite In "Channel" submenu, use ▲/▼ key to select "Favorite", then press key to enter ENTER "Favorite" submenu. Use ▲/▼ key to select your favorite channels and use key toENTER ” " and the selected channel will be listed in mark Favorite List.

Menu system instruction

23

24

3. Auto Scan add CH In "Channel" submenu, use ▲/▼ key to select “ ”, then press Auto Scan add CH or u ENTER key to enter “ ” submenu.Auto Scan add CH

5. Show/Hide

In "Channel" submenu, use ▲/▼ key to select "Show/Hide", then press key to enter ENTER "Show/Hide" submenu. Press ▲/▼ key to select the channel you want to hide or show, then use key to mark or remove " " and the selected channel will be hiden ENTER or shown.

6. Channel No. In "Channel" submenu, use ▲/▼ key to select "Channel No.", then press t/u key to adjust current channel, you can see the current channel number.

7. Channel Label In "Channel" submenu, use ▲/▼ key to select "Channel Label", then press to enter ENTER "Channel Label" submenu. Use t/u key to select and use ▲/▼ key to input the character or digit you want, press key MENU to confirm, then current channel is labeled.

Notes:

1. If the channel is audio program, an icon will be displayed in front of "Radio channel".

2. If a program has been added to "Hide" list, when you select program with CH△/ CH▽ key, this program will be directly jumped, but you can select the program by using digital key on the remote control.

Channel

Menu system instruction

Time

Press key to display the main menu on theMENU screen, use t/u key to select "Time" option, then press or ▼ key to enter "Time" submenu. ENTER

1. Sleep Timer In "Time" submenu, use ▲/▼ key to move the cursor to "Sleep Timer" option. There are eleven options for you to select: "Off", "5 Min", "10 Min", "15 Min", "30 Min", "45 Min", "60 Min", "90 Min", "120 Min", "180 Min" and "240 Min", press t/u key to select "Sleep Time" you desired.

2. Time Zone In "Time" submenu, use ▲/q key to move the cursor to "Time Zone" option. There are six options for you to select: "Eastern", "Central", "Mountain", "Alaska", "Pacific", "Hawaii". Press t/u key to select "Time Zone" your desired.

3. Daylight Saving time In "Time" submenu, use ▲/q key to move the cursor to "Daylight Saving Time" option. You can press t/u key to select "On" or "Off".

4. Clock Show the update time.

Setup

Press key to display the main menu on theMENU screen, use t/u key to select "Setup" option, then press or ▼ key to enter "Setup" submenu. ENTER

1. Menu Language In "Setup" submenu, use ▲/q key to move the cursor to select "Menu Language" option, there are "English", and options "Français" “Español" you can select. Press t/u key to select the option you desired.

Setup

Menu system instruction

25

26

2. Transparency

desired.

In "Setup" submenu, use ▲/q key to move the cursor to select "Transparency" option, there are "On" or "Off" options you can select. Press t/u key to select the option you

Setup

3. Zoom Mode In "Setup" submenu, use ▲/q key to move the cursor to select "Zoom Mode" option, there are four options for you to select: "Zoom", "Cinema" and "Nor mal"."Wide", Press t/u key to select zoom mode you desired.

4. Noise Reduction In "Setup" submenu, use ▲/q key to move the cursor to "Noise Reduction" option, there are four options for you to select: "Off", "Weak", "Middle" and "Strong". Press t/u key to select noise reduction you desired.

5. Advance In "setup” submenu, use ▲/▼ key to move the cursor to the "Advance" option, then use t/u key to adjust the related value. This function is only available for VGA.

Menu system instruction

1) H-POS