Skyworth LCD-42L8EFHD User Manual
Instruction Manual
LCD-42L8EFHDLCD-42L8EFHD
42" LCD TV/MONITOR
Thank you very much for your purchase of this product-the most natural Colour
Television Receiver.
To enjoy your set to the full from the very beginning, read this manual carefully and keep
it handy for ready reference.
SETUPSETUP
Insert The Batteries
1
Remove the battery cover by pressing it and sliding it down.
2
Insert the two 1.5V (AAA size) batteries making sure the polarity (+
or -)of the batteries matches the polarity marks Inside the unit.
3
Replace the battery cover by sliding it in until you hear a click sound.
Precautions when using batteries
Do not use old and new batteries together.
Do not use different types of batteries (for example, Manganese and
Alkaline batteries) together.
Note that there are chargeable and non-chargeable batteries. Do not
attempt to charge non-chargeable batteries.
Remove the batteries from the remote control unit if you do not intend to use
the unit for a long time. Precautions when using the remote control unit
Do not drop the remote control unit.
Do not subject the remote control unit to physical shocks.
Keep the remote control unit dry. May cause the unit to malfunction.
Replace the batteries with new ones when operation of the unit deteriorates.
TV Installation
-1-
SETUPSETUP
Locate the receiver in the room where direct light does not strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable viewing.
Allow enough space between the receiver and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
This TV operates on AC supply directly, connect the AC plug to the socket at the back of the TV.
Insert the mains plug in the socket having a mains voltage of 100-240V AC.
Do not install the receiver in a location near heat sources such as radiator, air ducts, direct
sunlight, or in a place somewhere like close compartment and close area. Do not cover the
ventilation openings when using the set.
Features
Up to 200 programme memory.
Program Organiser .
Sleep timer.
4:3 format , 16:9 format ,14:9 zoom ,
16:9 ZOOM1,16:9 ZOOM2
picture modes.
When no TV signal is dectected, after 15
minutes the TV switches itself a utomatically
to stand-bymode.
CYS: PAL / SECAM / NTSC
SYS: BG/DK / I / M
HDMI Input (support up to 1 080P)
PC Input (support up to 1 080i)
NICAM Stereo / AV Stereo
Panel Features
High resolution (FHD:1920x1080), 42" TFT LCD
display.
Brightness: 500cd/m
High-speed response time <8msec.
8-bit color depth, display 16.2M colors.
High contrast ratio (1300:1 Typital)
Viewing angle:178 (H)/178 (V)(CR>10).
2
00
In The Box
You should have:
Tele vision
Remote control
User Guide
Warranty Card
2 x AAA battery
Stand
Wall mount
-2-
FUNCTIONAL PARTS
FRONT PANEL
Note: The graphics are for representation only.
12
2 1
12
S-VIDEO
3
-AUDIO- LR VIDEO
ERAPHONE
HDMI3
1. Power Indicator
4.PROGRAM UP/DOWN button
7. ON/OFF button
10. EARPHONE Input
8
9
10
11
2. Remote Sensor
5. MENU button
11. HDMI3 Input
-3-
3
VOL PROG
4
5
6
MENU
TV/AV ON/OFF
7
3.VOLUME UP/DOWN button
6. TV/AV button
9. AV3 Input8. S-VIDEO Input
12. SPEAKERS
FUNCTIONAL PARTS
BACK PANEL
AV1
AV OUT
HDMI2
1
HDMI1
1 2
L - AUDIO - R VIDEO
VGA
VGA AUDIO
3
AV2
Pb
4
S/PDIF
PrY
5
R - AUDIO - L VIDEO
R - AUDIO - L VIDEO
6 7 8 9
1. HDMI1\HDMI2: Connect HDMI input signal from signal source such as DVD.
2. VGA: Connect a PC via a VGA cable.
3. VGA AUDIO: Connect audio signal from PC.
4. Y Pb Pr: Connect
RCA cable to connect DVD player or other video device's YPbPr output.
5. AV2: Connect AUDIO and VIDEO input signal from signal source such as DVD.
6. S/PDIF : Connect digital AUDIO output signal.
7. AV OUT : Connect AUDIO and VIDEO output signal.
8. AV1 : Connect AUDIO and VIDEO input signal .
9. ANTENNA IN: Connect a coaxial cable to receive signal from the antenna or cable.
-4-
75 ANT
Loading...