SKY WING Communication Electronics SK BTI 041 User Manual
Bluetooth Transmitter & Receiver BTI-041
User Manual
Contents:
1. Product Overview-------------------------------------------------------------- 2
2. Basic Operation --------------------------------------------------------------- 3
3. How to use as a Bluetooth Transmitter (TX)---------------------------------- 4
4. How to use as a Bluetooth Receiver (RX)------------------------------------ 7
5. Charging------------------------------------------------------------------------10
6. LED Indicator ------------------------------------------------------------------11
7. Product Specification-----------------------------------------------------------12
8. Attention and Q & A------------------------------------------------------------13
1.Product Overview
MFB (Multi Function Button) / LED Indicator / AUX port / Left RCA port /
Right RCA port
Mode switch / SPDIF input / charging port / SPDIF output
Package Contents:
A. Bluetooth Transmitter & Receiver *1
B. 3.5mm Audio Cable *1
C. Micro USB Charging Cable *1
D. User Manual *1
E. Fiber Optic Cable *1
2. Basic Operation
Button Function Operation
Power on /
off
Pairing mode
Long press MFB 2 seconds to power on or off
Double press Pairing Button to enter inter into pairing
mode.
（RX mode: Red & Blue LED flash alternately; TX mode:
MFB (Multi Function
Button)
TX/RX mode selection
Blue LED flash）
RX Mode: short press MFB to play or pause music during
Play / pause
aptX™ HD on
/ off
Switch the button to TX side for TX mode, or switch the button to RX side
for RX mode.
*The paired records of the last mode will be delete when switch to another mode.
*Pls turn off the units after 3 seconds then switch to another function mode.
playing.
Not work in TX mode.
Under off status, long press the MFB 7 seconds till Green
LED flash for 1 second, then repower on the unit will
active the function of aptX™ HD；once again long press
the MFB 7 seconds to Green LED flash twice for to turn
off this function.
SPDIF/AUX mode
Insert the 3.5 mm audio cable or RCA cable to enter into the AUX mode,
insert the
fiber optic cable to enter into the SPDIF mode.
3. How to use as a Bluetooth Transmitter (TX)
3.1 Bluetooth Pairing and Connection
A．Off mode, switch the button to TX side and long press MFB 2 seconds to power on.
B．Double press MFB button to enter into pairing mode with Blue LED flash.
C．Turn on the Bluetooth function of your device (Bluetooth Headphone, Speaker or
receiver etc.) to pairing mode with Red & Blue LED flash alternately or Blue LED flash.
D．Bluetooth connect BTI-041 with your device for about 5-30 seconds, LED turns to low
Blue LED flash after connected.
E．Connect BTI-041 and your phone with 3.5 mm audio cable, and could play music from
your phone to the headphone or speaker.
1．Off mode, turn to TX switch.
2．Long press MFB 2 seconds to power on , and double press MFB button to enter
into pairing mode with Blue LED flash. Turn on the Bluetooth function of headphone or
speaker to enter into pairing mode.
3．Bluetooth connect BTI-041 with headphone or speaker about 5-30 second , LED
turns to low Blue LED flash after connected.
4．Insert the audio cable, RCA cable or fiber optic cable to select the connection
mode.
Notes:
Blue LED flash in different way depend on different CODEC (of connected device) after
connected, refer to point 6 LED indicator.
3.2 Multi Point Connection
A．Follow 3.1 to connect with the first device, double press MFB button to enter into
pairing mode again with Blue LED flash.
B．Turn on the Bluetooth function of the second device (Bluetooth headphone,
speaker or receiver etc) to enter into pairing mode, then Bluetooth connect BTI-041
with the second device in 5-30 seconds. BTI-041 solid Green LED after connected with
two devices.
Notes：
1. Pls turn off BTI-041 and turn on again, and try to reconnect or repair with two devices, when it
could not connected with two devices at the first time.
2. Multi point connections could compatible with most Bluetooth devices of market.
Loading...