Mono Bluetooth Headset M99+
User Manual
Contents:
1. Product Overview ------------------------------------------------------------------- 1
2. Basic Operation --------------------------------------------------------------------- 2
3. Bluetooth Pairing and Connection -------------------------------------------- 3
4. Connection with Two devices ----------------------------------------------------- 4
5. LED Indicator ----------------------------------------------------------------------- 5
6. Charging ------------------------------------------------------------------------------ 6
7. TTS Tone ------------------------------------------------------------------------------ 7
8. Product Specification ------------------------------------------------------------- 8
9. Attentions and Q & A --------------------------------------------------------------- 9
1. Product Overview:
Volume +
Volume -
LED Indicator
MFB (Multi
Function
Button)
Micro USB
Charge Port
Digital
Microphone
Mute Button
Package Contents：
A. Bluetooth Headset M99+ x 1
B.
Micro USB charging cable x 1
C. User manual x 1
2. Basic Operation:
Button
Function
Operation Instruction
MFB
Power on
In off status, long press 2 seconds MFB to power on.
*If there is no pair record, power on will enter pairing mode
automatically. If there is pair record, power on will enter
reconnecting mode automatically, if it can not reconnect
any device for over 20 seconds, it will enter pairing mode
automatically. The actual reconnect time base on the pair
record.
Power off
In on status, long press 3 seconds to power off.
Enter pairing
mode
In off status, long press 3-4 seconds to enter pairing mode.
Or under unconnected standby mode, short press the MFB
to enter pairing mode.
Play / Pause
Short press when play music.
Redial a call
Double press MFB to dial the last call.
Voice dialing
Long press 1 second MFB then release.
Voice assistant
Long press 1-2 seconds MFB with “Do” tone and activate.
Call noise
reduction
Power on will activate the function automatically.
Answer a call
Short press (when call coming).
Hang up a call
Short press (during a call).
Reject a call
Long press 1 second (when call coming).
Volume +
Volume Up
Short press.
Next Song
Long press for 1 seconds.
Volume +
Volume Down
Short press.
Previous Song
Long press for 1 seconds.
3. Bluetooth Pairing and Connection:
Pairing
Long press MFB 3-4 seconds to enter pairing
mode with LED Blue & Red alternately flash.
Connection
Search and click to connect “TaoTronics TTBH041” on your phone Bluetooth lists.
A. In off status, long press MFB 3-4 seconds to enter pairing mode with LED
Blue & Red flash alternately.
B. Search and click to connect “TaoTronics M99+” on your phone Bluetooth
lists, LED change to Blue slow flash after connected, now you can play music
from phone to headphone.
C. You can press MFB/ volume+ / volume- on the Bluetooth headset to
control the answer/hang up a call and play/pause of the music, next and
previous songs, volume up and down.
4. Connection with Two devices:
A. Follow part 3 to connect with first phone, then turn off the Bluetooth
function of first phone.
B. Long press MFB 3-4 seconds to pairing mode again with Red & Blue LED
flash alternately.
C. Search and click to connect “TaoTronics M99+” on your second phone
Bluetooth lists, LED change to Blue LED low flash after connected.
D. Turn on Bluetooth function of first phone, click to reconnect “TaoTronics
TT-BH041” on Bluetooth lists. Headset is connected with two phones now.。
* Music only can be played from one phone under two connections,
when you want to play music from another phone, you need to pause or
close the music of the previous phone. The same operation during
talking status.
5. LED Indicator
Mode
LED Indicator
Power on
LED Blue flash 2 times
Power off
LED Red flash 2 times
Pairing mode
LED Red & Blue flash alternately
Unconnected standby
mode
LED Blue flash twice every 5 seconds
Connected standby
mode
LED Blue flash once every 10 seconds
Playing Music
LED Blue flash once every 10 seconds
Talking
LED Blue flash once every 10 seconds
Delete paired record
Blue and Red LED flash once at the same
time
Charging
Solid LED Red
Full charged
LED Red turn off
Low battery
Red LED flash
6. Charging
Please charge the M99+ at once when the Red LED flash. Charging time is
about 2 hours. Solid LED Red change to Solid LED Blue when full charged.
Charge Connections
Please connect to the M99+ charging port through the Micro USB charging
cable, the charger can be used as car charger, travel charger, computer USB,
etc.
Charging with Charger Charging with PC
Note:
1. Pls charge the M99+ at least one time every 2 months when don’t use it.
2. In power on, it is normal that charging indicator will cover bluetooth indicator while
charging.
7. TTS Tone
Status
Tone
Power on
Power on
Enter pairing mode
Pairing
Pair success
Paired
Bluetooth connect success
Your headset is connected
Bluetooth disconnect
Your headset is disconnected
Power off
Power off
8. Product Specification:
Bluetooth Version
V5.0
Bluetooth Chipset
QCC3020
Operation Range
10 meters
Bluetooth Protocols
HSP, HFP, AVRCP, A2DP
CODEC Code
SBC, AAC
Battery Capacity
400mAh/3.7V
Charging Time
2 hours
Stand-by Time
400 hours
Working Time
About 34 hours (50% volume)
Headset Net Weight
78.8g
Headset Dimension
163.7*160.78*61.6mm
*Actual use time will differ from environment and music
8. Attentions and Q & A:
A. How to reconnect and operation when failed to reconnect ?
When M99+ connected with your mobile phone successfully at the first time,
it will search and reconnect the paired device automatically when power on, If
failed, please pair and connect again. The headset can reconnect in 10
minutes, if over 10 minutes will power off automatically, disconnect in long
distance will notice “Your headset is disconnected”.
B. How to delete paired records?
In power on state, long press the volume+,volume-,MFB for 5 seconds to
clear the pairing record. The indicator Blue and Red LED flash once at the
same time that means the pairing record has been cleared, and the M99+ will
not connect the connected device. When there are various connection
problem, try clearing the pairing record firstly.
C. What’s the password for pairing?
Some connection devices require password for pairing, pls try 0000 or 8888 or
1111 or 1234.
D. What devices could charge for the headphone?
Any car charger, power bank, PC etc which meet DC 5V , charging current
more than 500mA could be charge for this item.
E. How to do if can not power on or connection problem?
Please try to reset the headphone, long press MFB and plug charging cable, it
will reset to power off, then power on to use.
F. Why power off automatically?
No connection for over 10 minutes or battery voltage is less than 3.1V.
G. Three-way calling function operation
Call coming during call, short press the MFB to answer the new call and hang
up the current call;
Call coming during call, double press the MFB to answer the new call and
keep the current call;
Call with a new call coming, long press the MFB for 2 seconds rejecting the
new call.
When you are during a three-party call, double press the MFB to switch audio
between the current call and the keep call.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Loading...