SKYWELL 5T
Quick Start User Guide
Atmospheric Water Generator
5T INFORMATION AVAILABLE AT SKYWELL.COM
User Manual
Quick Start User Guide
Service Manual
Service Videos
Parts Catalog
Warranty Procedures
Skywell App Guide
When using electrical appliances, basic safety precautions should be followed to
reduce the risk of fire, electric shock and injury to persons or property.
If the Skywell 5T is without power for more than 4 consecutive hours:
DO NOT drink the water.
Contact your dealer technician to fully clean the Skywell 5T per the Sanitize the
Skywell section in the Skywell 5T Service Manual.
1
DISPENSE WATER
Dispense Cold Wa ter
After water generation, it may take up to 90 minutes for the water to reach its
maximum cold temperature of 37° Fahrenheit (2.7° Celsius). During this time, the
compressor may run continuously. Cold water available for dispense will be
aligned with overall water generation, which is influenced by the ambient
conditions.
1. Place your cup on the center of the drip tray.
2. Press the blue circle button to the right of the touch screen to dispense cold
water.
3. Press the blue circle button for the duration of the dispense until the desired fill
level is obtained
Child Safety Lock
Hot Dispense Button
Cold Dispense Button
Dispense Hot Water
After water generation, the Skywell is able to heat the water up to 208°
Fahrenheit (97.7° Celsius) within 15-20 minutes. Hot water available for dispense
will be aligned with overall water generation, which is influenced by the
ambient conditions.
1. Place your cup on the center of the drip tray.
2. Press and release the top red unl ock button (Child Safety Lock) on the left of
the touchscreen. You have approximately 10 seconds to begin hot water
dispense before the red unl ock button will need to be pressed again.
3. Press the bottom red circle button (below the red unlock button) to dispense
hot water. U se with caution.
4. Press the red circle button for the duration of the dispense until the desired fill
level is obtained.
5. Never allow children to dispense hot water without proper and direct adult
supervision.
2
THE SKYWELL APP
Date & Time
Custom Logo
(optional)
Current Water
Level
Quiet Mode
Settings
Current Hot Water
Temperature
bottles save d
Current Cold Water
Temperature
Tap once to enter
Service Mode
Tap once to switch
and Fahrenheit
Track
Hydration
Contact Info
between Celsius
Additional Pages
Create Hydration Prof ile
Eco Quiz
Skywell Contact Information
16.9 oz
More details regarding the Skywell App can be found in the Skywell App Guide at
www.skywell.com.
3
CREATE PERSONAL HYDRATION PROFILE
On the Dashboard page
of the Skywell App, tap
the arrow on the right
side
Optional Profile Features:
Avatars
º
- Select an avatar by tapping on the
pencil icon at the top of the page
- Browse through Skywell’s avatar options
by tapping on the “Avatar Types” drop down menu on the top right of
the page and by using the right and left arrows
On the Hydration Profile
page, tap the + button to
create your profile and
track hydration
Enter your first name
and last name initial in
the fields on the page
Daily Hydration Goals
º
- Set daily hydration goal by swiping the bottom bar to the right.
PIN Code
º
- To have your Hydration Profile protected with a unique PIN number so it is only
accessible by you, tap the “ON” button under “ENABLE PIN”. Note: you will be
prompted to create a 4-digit PIN code once you have selected all of your other
desired profile features and tap the “OK” button on the bottom of the page.
ADDING WATER DISPENSED DATA TO HYDRATION PROFILE
After you’ve dispensed
your water, a page
displaying water
dispense data will
appear
Tap on the “Add to
Profile” button on the
bottom of the page
Select your profile
from the Hydration
Profiles page
The dispensed water
data is automatically
added to your
Hydration Profile
4
Loading...