Skywalker Trampolines SWK1060 Installation & Assembly

Page 1
Ladder Assembly Instruction
Refer to PARTSLIST for identification of parts.
WARNING:
Remove the ladder when trampoline is not in use.
Remove all components from the box and lay each matching component together. Tools Required: Adjustable Wrench.
Please use extreme caution not to pinch your fingers.
Ladders lets young children climb onto trampoline.
Frame Leg
Cross bar
1
Lay the two leg frames on a clear area
Insert the cross bar onto the leg frames and line up
2
with bolt holes. Repeat for next two (2) cross bars.
M6x31mm Bolt
M6 Cap Locknut
3
Secure the cross bars to the legs by the M6x31mm Bolts and M6 Cap Locknut.
End Cap
4
With curled top area of ladder facing down. Insert the two end caps with the slant side of the end cap facing down as shown.
5 Assure that all bolts and end caps are tight and secure.
Page 2
PARTS LIST & EXPLORDED DRAWING
Replacement components can be obtained by contacting Skywalker Holdings LLC. 1-866-603-5867 M-F 8:00 am - 5:00pm.
Parts
QTY.
Key No.
M6x31mm Bolt12M6 Cap Locknut
12
A B
C
D
A
B
End Cap
2
C
Frame Leg
2
D
E
Crossbar
3
E
Loading...