Skytec SPS122 Instruction Manual

10010825

INSTRUCTION MANUAL

HANDLEIDING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

SPS122 Active

Speaker Set

2

-

12

SYSTEM CONFIGURATIONS:

SPECIFICATION:

Output power: ................................................ 700W

........................................................... 2x 350W max

Frequency Response: ....................... 50Hz - 20kHz

SPL max: .......................................................

122dB Woofer:

............................................................... 12” Horn:

........................................... 1” Piezo Tweeter

Power supply: ........................ 220~240VAC / 50Hz

Dimension: ...................... 120 x 38 x 38cm (1 piece)

Weight per set: .................................................

29kg Congratulations on the purchase of this

SkyTec active speaker set. Please read this

manual carefully prior to using the unit.

WARNING

TO ENSURE MANY YEARS OF TROUBLEFREE USE, PLEASE OBSERVE THE FOLLOWING

3

-

12

• Hearing damage: Loudspeakers are easily capable
of generating high sound pressure levels (SPL)
sufficient to cause permanent hearing damage to
performers, production crew and audience
members. Caution should be taken to avoid
prolonged exposure to SPL in excess of 90 dB.

• Do not overload the box to avoid damage to the
speakers.

• Do not place an open fire (candle, etc.) on top or
next to the box - FIRE HAZARD

• Only connect to an earthed mains outlet of
230Vac/50Hz.

• For indoor use only. If the box is used outdoors,
you need to make sure that no humidity can enter
the box.

• When not in use, unplug the unit from the mains.

• Unplug the unit from the mains prior to checking or

replacing the fuse.

• Make sure that the box is placed on a stable,
strong surface.

• The boxes can be stacked but do not put more than
60kg weight on the box.

• The boxes can be hung. Use only strong and
approved mounting material. During the mounting,
make sure that nobody is standing below the
mounting area.

• Place the stand always on a flat, level, and

• Do not place liquids on the box and protect it

against humidity. Humidity can shorten the life
time considerably.

• Only use suitable means of transportation if
you want to move the box – BEWARE OF
YOUR BACK !!

• If the unit is damaged to an extent that you can
see internal parts, do not plug the unit in a
mains outlet. In this case, please contact
Tronios.

• Always unplug the unit during a thunderstorm
or when it is not in use.

• If the unit has not been used for a longer period
of time, condensation can occur inside the
housing. Please let the unit reach room
temperature prior to use.

• Never try to repair the unit yourself. It does not
contain any user serviceable parts.

• Run the mains lead in such a way that nobody
can fall over it and nothing can be put on it.

• Only use the supplied mains lead or another
lead recommended by SkyTec.

• Set the unit to the lowest volume prior to
switching it on

• Keep the unit out of the reach of children.

Protect your environment. Recycle packing

stable surface and that the legs do not present a material whenever possible.
trip hazard.

Use only stands which are designed to support Do

not throw a faulty unit into normal the
weight of the speaker. Do not attempt to household waste but bring it to a special
place more than one speaker on a stand collection point. A large part of it can be designed for
a single speaker. recycled.

Route cables so that peoples will not trip over them

pulling the speaker over.

PRODUCT FEATURES

General

- 1x 12" Amplified speaker

- 1x 12" Passive speaker

- Set of speaker stands 1.8m height

- 5m Speaker cable (jack-jack)

- Tone control

- Line and microphone input

- Plug and Play unit

- Supplied as a set in one carton

About the enclosure

The enclosure and baffle of this range of speakers are made of polypropylene co-polymer. The use of

copolymer allows features such as stand mounting sockets, handholds, ports and high frequency horns to be
molded directly into the cabinet. Not only do you get contemporary appearance, you also get lots of
functionality.

INPUT PANEL

4

-

12

1. Volume control for the output

2. Treble tone control

3. Bass tone control

4. Volume control for the line input

5. Volume control for the microphone

6. Clip indication. These LED will light up when amplifier are
on max power. It can occur that these LED will lit up now

and then, this is not a problem. But if it lights up continually you
need to adjust the volume down, otherwise permanent damage to
equipment might occur

7. Power Indication. This clear green indicator will light when
the amplifier is turned on.

8. Speaker output

9. Output connector (line out). For connection to a second
active speaker box.

10. Line input for audio input source e.g. mixer, CD player, etc

11. Microphone input

12. On/Off Switch: For switching the speaker on and off. Always
adjust the volume down to its minimum before switching this

speaker on.

13. Mains Power Connector / Fuse. This main fuse secures the
speaker against defects. Replace this only with a

fuse of same type and value.

OPERATION:

Connect the passive speaker with the supplied speaker cable to the speaker output connector (8).

WARNING: only connected the original slave speaker on the speaker output terminal!

LINE INPUT (DVD, CD-player etc.): Connect the source (DVD-player, CD-player etc.) to the line input

(10). MICROPHONE: Inset the microphone to the MIC Jack or MIC XLR socket (11) POWER: Connect the
device with an electric outlet (220-240VAC / 50Hz)

Adjust the master VOLUME (8) and the line (4), mic (5) level to get the right sound balance.

Adjust the tone control (2+3) to get the right sound.

This appliance should not be put into the domestic garbage at the end of its useful life, but must be disposed of at a central

point for recycling of electric and electronic domestic appliances. This symbol on appliance, instruction manual and
packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling used
domestic appliances you contribute an important push to the protection of our environment. Ask your local authorities for
information regarding the point of recollection.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of
the warnings contained in this manual. Tronios cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.

ABS ACTIEVE PA LUIDSPREKERS

Hartelijk dank voor de aanschaf van onze SkyTec actieve luidspreker.
Lees deze gebruiksaanwijzing aandachtig door alvorens het apparaat in bedrijf te stellen.

NEEM VOOR EEN LANGDURIG EN VEILIG GEBRUIK DE VOLGENDE PUNTEN IN ACHT: