Skytec 150.271, NEW MOON, 150.271 NEW MOON Operating Instructions Manual

www.skytronic.com

View the complete skytec product range at

OPERATION

1. Unpack from carton and check all components are present.

2. Open lamp access cover and fix capsule lamp securely into holder. Take care
not to touch the lamp with bare fingers, if you do clean it with alcohol and
dry with a soft, clean cloth.

CAUTION: Before fitting the lamp make sure the unit is isolated from any AC

power source and the unit is cool.

Re-fit the cover and tighten the thumbscrew.

3. Attach the mounting bracket to the unit and fix securely in required location.
Ensure all the fixing bolts are adequately tightened.

NOTE. Site the unit where there is adequate ventilation and away from any

inflammable and heat sensitive material.

4. Connect the unit to a suitable AC power source.

5. As the unit is sound activated adjust the sensitivity control to the desired
position.

6. For optimal performance and longer unit life it is recommended to cycle
operation with a break after 60mins continuous use.

TECHNICAL DATA

Power . . . . . . . . . . . . . . . . . . .230V ac 50Hz Lamp . . . . .24V 250V ELC

(SkyTec Ref. 159.428)

Fuse . . . . . . . . . . . . . .F3.15 A/250V 20mm Colours . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Weight . . . . . . . . . . . . . . . . . . . . . . . . . .9Kg Dims . . . . . . . . . . . . . .305 x 275 x 140mm

A sound activated multi coloured lighting effects unit that sends out beams
of light which change colour randomly or can be manually operated. The
unit has adjustable focus, sensitivity control and is fan cooled.

CAUTION: To prevent electric shock do not remove cover when
unit is connected to an AC power source.

WARNING:

SkyTec light effects contain halogen
lamps which in operation reach very
high temperature, therefore the
unit must be sited at least 0.5m
away from inflammable and heat
sensitive materials and where the
metal housing cannot be touched.

150.271 NEW MOON

NEVER open unit when hot. Do not use in a damp or dusty
environment. Indoor use only. Refer servicing to qualified personnel.

THIS UNIT MUST BE EARTHED.

1. Thumbscrews for focus adjustment

2. Access cover to lamp

3. Mounting bracket

4. Fuseholder

5. AC power cord

6. Fan

7. Microphone

8. Sensitivity control for gobo rotation

9. Gobo switch:

AUTO -

runs through all 16 gobos changing every 5 seconds

FIX - Gobo does not change
SELECT - Allows gobos to be changed manually

10. Remote control socket (6.3mm)

478

65

910

1

2

3