Skyrc SK-DIS10100 Instruction Manual

INSTRUCTION MANUAL

AAA Battery Discharger

Thank you for purchasing the SkyRC AAA battery
discharger. Please read these instructions carefully
and thoroughly before operating this unit.

FEATURES

- Eliminate memory effect of NiMH cells and maximize
battery life.

- Four independent discharging slots.

- LED indicators for easy check of discharging status.

- 1000mA current for fast discharging.*

- Aluminum case for superior heat dissipation.

- Screw type battery terminal is comfortable to fix
battery.

* Discharging time will vary depending upon the brand,
capacity, and condition of batteries being discharged.

SK-DIS10100

GENERAL PRECAUTIONS

- Do not discharge battery cells other than NiMH AAA
Batteries

- Do not operate the discharger if it appears damaged
in any way.

- The discharger will get hot while in use. Do not
touch it.

- Operate in well ventilated area.

- Always place the battery cells with right polarity.
Incorrect polarity may cause damage.

- 1 - - 2 -

OPERATION INSTRUCTION

1. Put 1 – 4 cells of NiMH batteries into the slot. Make
sure polarity of the batteries are in right direction.

2. Tighten the screws gently until their tips touch to
the batteries. LEDs will glow when you put 2 cells
on 1-2 slots or 3-4 slots. If you put only one cell in
any slot, the LED will not turn on. However the
battery is under discharging process. (To turn on
the LEDs, you need 2 cells in pair)

3. When LEDs turn off, please unscrew 4 screws and
take out the batteries from the tray.

- 3 - - 4 -

SPECIFICATION

Size 72.5X56X26.6mm
Weight 81g
Battery type AAA size, NiMH only
Cell of discharge 1 - 4 cell
Max. discharge current 1,000mA
Cut off voltage 0.9V (Please take out
battery from discharger
after cut off)
Status of discharge Discharging: LED glow.
Finished: LED off
Case Materials Aluminum

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Manufactured by
SKYRC TECHNOLOGY CO., LTD.
www.skyrc.com