Skyrc PSU30ADU,PSU30AU,PSU30ADE,PSU30AE Instruction Manual

INTRODUCTION

Thank you fo r purc hasing the eFUEL 30A
Switch ing DC Power Supply. We are
confid ent th at you will be very pleased wit h
its pe rforma nce be cause our Switching DC
Power Supply is de signed and manufactured
by ski lled p rofess ionals using the highest
standard in workmanship. You can b e assured
of man y year s of t rouble free service.

GENERAL DESCRIPTION

Your eFUEL swit chin g DC Pow er Supp ly i s
desi gned to use hou seho ld A C power sou rce
to p ower equipm ents tha t re quired DC p ower .
The eFUEL conve rts stan dard househ old
power 110- 120V AC or 200-2 40V A C to 9-18V
DC po wer a nd can supply up to 3 0 amp eres of
cont inuous powe r.

FEAT UR ES

* Two DC power outputs, up to 30
amperes
* Output voltage adjustable 9-18V(Part No.
PSU30ADU & PSU30ADE only)
* Large LCD indicates voltage and current
amperes output (Part No. PSU30ADU &
PSU30ADE only)
* Two USB ports, 5 volts, 1000mA total for MP3
player, mobile phone and digital cameras
* Smart cooling fan
* Over temperature protection
* Over loading protection
* Short circuit protection

30A SWITCHING DC POWER SUPPLY

Important Safety Instructions

Danger: To reduce the risk of fire or electric
shock, carefully follow these instructions.

Thi s m anual co nta ins i mpo rta nt sa fet y a nd
ope rat ing i nst ruc tions fo r t his p owe r s upply .
Bef ore you use th e pow er sup ply, rea d a ll
the in struc tio ns and c aut ion ary m ark ing s in
thi s m anual , o n t he po wer su pply, an d o n
the pr oduct th at you w ill co nnect to th e
pow er suppl y, to reduc e t he risk of inj ury:

INSTRUCTION MANUAL

Caution: To reduce the risk o f damage:

Do not operate the power supply if it has been
dropped or damaged in any way. Take it to a
qualified service technician for repair.
The power supply should be operated only from
a standard AC outlet that provides 110 - 120V
AC(Part No. PSU30ADU & PSU30AU) or 200 ­240V AC (Part No. PSU30ADE & PSU30AE),
50/60 Hz. If you are not sure of the type of power
supplied to your home, consult your local power
company.
To protect the power supply during a lightning
storm or when it is left unattended and unused
for long periods of time, unplug it from the AC
outlet. This will prevent damage to the power
supply from lightning and power surges.
Unplug the power supply from the outlet before
attempting any maintenance or cleaning. Do
not use liquid or aerosol cleaners. Use a damp
cloth for cleaning and then wipe it dry
immediately.

1

Do not use the power supply near water (for
example, a bathtub, washbowl, kitchen sink,
laundry tub, wet basement, or swimming pool).
Do not place the power supply on an unstable
cart, stand or table. If the power supply falls,
it could injure a person or cause serious
damage to the power supply.
Do not overload power outlets or extension
cords. An overload can result in fire or electric
shock.
Do not disassemble this unit; take it to a
qualified service technician when service or
repair is required. Improper reassembly may
result in a risk of electric shock or fire.
Do not use an attachment not recommended,
this could result in a risk of fire , electric shock,
or injury to persons.
Never push any object into the slot in the power
supply. It could touch dangerous voltage points
or short out parts resulting in a fire or electrical
shock.

If your power supply does not operate normally,
in particular if any unusual sounds or smells
come from it, unplug it immediately and contact
a qualified service technician for repair.

CONNECTIONS

Caution: Make all o ther conne ctions
before you connect the power supply to
standard AC power

1. Turn the sleeves of the red and black binding
output posts counterclockwise to expose the
wire hole.

2. Insert the device's positive wire (usually red)
into the red binding post's wire hole, then
tighten the binding post's sleeve to secure
the wire in place.

3. Insert the device's negative wire (usually
black) into the black binding post's wire hole,
then tightening the binding post's sleeve to
secure the wire in place.

4. If you are using the banana plugs connection,
insert the plugs into the terminal's jack.

Warnings: To avoid damage to both the power
supply and the device:

Follow the correct polarity when connecting the
power supply and the device.
Do not let the ends of the positive and negative
wires touch each other.

To use the power supply after you connect the
device to it, set POWER to turn it on with the
red light illuminated.

OPERATION

Moving your power supply away from the
receiver.
Connecting your power supply to an outlet that
is on a different electrical circuit from the
receiver.
Contacting a qualified service technician for
help.

Caution: To reduce the risk of energy hazard,
be careful not to short the output terminal
during operation. Remove the output
connections after use.

Caution: Place your power supply in a well
ventilated open and cool area. Do not block the
openings at the fan suction on the side and the
discharge openings on the other side.

If the outlet has power, set POWER to OFF,
reduce the load (by using a device that does
not require more than 30 amps), then set
POWER to ON. Your power supply's overload
protection circuit automatically shuts down the
power supply when it is overload and resets by
turning POWER to OFF.

If the power supply's POWER switch does not
light, check all connections and confirm the
wall AC outlet has power.

Try to eliminate th e interfer ence by:

Caution: Your power s upply might cause TV or
radio interfer ence ev en when it is operating
properly. To d etermin e whether your power
supply is caus ing the interference, turn off your
power supply. If the interference goes away,
your power sup ply is causing it.

2

Dual DC
Output

Cooling
Fan

USB Power
5V / 1A

Voltage Adjustment Dial (9V-18V)
Part No. PSU30ADU &
PSU30ADE only

Current & Voltage
Read Out

Power
Switch

Do Not
Cover!

Ventilation Fan

5V / 1A

USB Power

DC OUTPUT

Do Not
Cover!

Ventilation Fan

9V

18V

VOLT

Input: 100-120V~ 50-60Hz

Output: 9-18V 30A

30A Switchi ng DC Power S upply

Part No. PSU3 0ADU 540 Wat t

AC Power
Input Socket

Power
Switch

Cooling
Fan

INPUT: 100-120V AC

Voltage………… ………………………………….…110V AC (Part No.PSU30AD U,PSU30AU)
220V AC (Part No.PSU30ADE, PSU30AE)
Input AC Fr equency………………………………………………….……….…………50Hz /60Hz
Output Volt age………………………………………………………..……….……9-18V D C±0.5V
Output Curr ent………………………………………………………………….……………30A±1 A

Current Ove rload Protection…………………………………………………………≤ 31A 500MS

Input Fuse… …………………………………………………………………….110V AC 10A Fuse
220V AC 5A Fuse
LCD Display …………………………………………………………….…Voltage Precis ion ±0.3V
Current P recision ±0.5A

Output Volt age Ripple……………………………………………………………..… …… <100MV

Power Effic iency………………………………………………………………………..………>8 0%
Power Facto r………………………………………………………………………..……………>0.7
Over Temper ature Protection………………………………………………….……… ……<100℃

Cooling Met hod…………………………………………………………………………Cooling Fan

Operating T emperature………………………………………………………………………0- 40℃
Operating H umidity……………………………………………………………………………0-9 0%

Dimensions (L*W*H)………………………………………………………….....208x1 39x59.5mm

Net weight… ………………………………………………………………………..…………1.50kg

SPEC IF ICATIONS

Specifi cat ions ar e typic al; ind ivi dual un its mig ht vary. S pec ific ati ons are subjec t t o
change and imp rov ement w ith out not ice.

3

2010 SkyRC Technology Co., Ltd. All Rights Reserved. No part of these manual may be
reproduced without the written permission of SkyRC Technology Co., Ltd.

4

Part No.PSU20ADU,PSU20ADE,PSU20AU,PSU20AE
Printed in China.

PRODUCT WARRANTY

The eFUEL 30A DC switching power supply is
guaranteed to be free from defects in materials
or workmanship for period of one year from the
original date of purchase (verified by dated,

itemized sales receipt). Warranty does not cover
incorrect AC voltage input, damage to case or

exposed circuit boards, disassembling case,
tampering with internal electronics, allowing
water, moisture, or any other foreign material to
enter this Power Supply or get onto the PC board,

incorrect wiring of output, allowing exposed

wiring to short circuit, or any damage caused by
crash, flooding, or act of God. Because SkyRC
has no control over the connection & use of the
power supply, no liability may be assumed nor
will be accepted for any damage resulting from
the use of this product. Every power supply is
thoroughly tested & burn-in before leaving our
factory and is, therefore, considered operational.
By the act of operating power supply, user
accepts all resulting liability. In no case shall our
liability exceed the product’s original cost. We

Warning:

This applia nce is not intend ed for use by
persons (in cluding chi ldren) with reduc ed
physical, s ensory or m ental capabilitie s, or
lack of exp erience and knowl edge, unles s
they have b een given s upervi sion or
instruction concerning use o f the appli ance
by a person responsibl e for their safet y.
Children sh ould be sup ervise d to ensure that
they do not play with the a ppliance.
WARNING: If the surfac e is c racked, swi tch
off the app liance to a void t he possibil ity of
electric sh ock.

For indoor use only.

reserve the right to modify warranty provisions
without notice.

Manufactured by

SKYRC TECHNOLOGY CO., LTD.

www.skyrc.com

208.00

139.00

132.00

59.50

63.50