SkyRC Micro Digital Pitch Gauge User Manual

INSTRUCTION MANUAL

DPG-020 Micro Digital Pitch Gauge

The digital pitch gauge is designed for application in model helicopters and serves to measure
the rotor blade pitch value.

The built in digital gyroscopic sensor is capable of detecting pitch angle, with result displayed
through LCD screen, providing a simple and precise way of measuring pitch angle.

FEATURES

Large LCD for easy reading
Measure up to 450 size helicopter
Fast and accurate measurement
Zero function
Auto rotating display
Auto power-off (Power shuts down after 5 minutes without any movement)

SPECIFICATIONS

Body Dimension
Suitable blade width
Detectable pitch range
Temperature

44x37.2x14mm
15mm~35mm
±90°
0~40°C

Resolution
Current consumption
Battery
Weight (including battery)

0.1°

4.5mA
CR2032 Lithium X1
20g

ILLUSTRATION

Power and
Zero Button

LCD Display

Blade Clamp

- 1 -

HOW TO USE

Press “POWER” button to turn on the power. For correct pitch measurements, DPG-020
digital pitch gauge must be zeroed before being used. Press “POWER” button once to zero
the gauge. Please refer to the below instruction to understand how to use DPG-020. After
used, Press “POWER” button for about two seconds to turn off.

Di

g

ita

Digital Pitch Gauge

DPG-020

l P

i

tch Ga

u

ge

DPG-020

ZERO THE GAUGE

Place the DPG-020 horizontally
leveled with top of helicopter

MEASURE THE PITCH

Mount the DPG-020 on main
blade to measure the pitch.

frames.
Press “POWER” to zero the
gauge.

HOW TO CHANGE BATTERIES

Low battery could contribute to reduced screen brightness and abnormal startup. Please
replace battery should this occurs.

Open the battery compartment by removing the four screws at the back of the pitch gauge

1.

with a philips-head screw driver.
Remove the battery compartment cover.

2.

Insert / replace one CR2032 batteries while observing the correct polarity.

3.

4.

Close the battery compartment and fasten it with the four screws.

Should the pitch gauge display abnormal behavior after accidental shock or impact, proceed
to remove and re-install battery to reset the device.

WARRANTY AND SERVICE

We guarantee this product to be free of manufacturing and assembly defects for a period of one year
from the time of purchase. The warranty only applies to material or operational defects, which are
present at the time of purchase. During that period, we will repair or replace free of service charge for
products deemed defective due to those causes.

For any repair or replace service, please contact your dealer in the first instance, who is responsible for
processing guarantee claims. This warranty is not valid for any damage or subsequent damage arising
as a result of misuse, modification or as a result of failure to observe the procedures outlined in this
manual.

RoHS

Manufactured by

SKYRC TECHNOLOGY CO., LTD.

www.skyrc.com

7504-0379-01

- 2 -